Re Water Can

Last crawled date: 4 years, 1 month ago

re water can. Watering can that measures dose.
Simply poor the jug and only the correct amount of water comes out, then re poor again,
and again, and again and so on.
"i make design many things that don't make it here for all sorts of reasons, anyway i thought i'd
upload one since,, incert sets of reasons if that changes anything."
Watering can that measures dose.
This dry season inspired this watering can that measures a dose
of water each time its poured.
Results may vary, use at own risk."getting a water tight container takes work to perfect depends on your Printer."
Water Carrying vessel.
Its shape means it stacks. being very square.
version 12 "i must have updated it to 14"
shown printed
1mm wall thickness in most areas, some gussests.
Print is aprox 72mm by 71mm by 13mm aprox. at extruder tip of .4,,, i think,,,was it .5
Scale to suit.
Repaired, has the handle area supported as part of the overall Can now.
No lid yet.

I can see more tuneing and my printer to suit this print could get the speed up nicely.
Printed here in PLA. else print to suit else don't. perhaps this could be good in ar,,stainless steel, hum, etc.
.28mm layer hight.
3 shells
20% infill
200 extruder temp
feedrate 40
travel freedrate 50 yip not speeding yet in these settings.
HBP 35*
works in progress,,working,,
"print settings can be make to not leak but it takes work, some printers may be better, depends of course."
With luck it might be usefull.
I do enjoy designing and making things of course and having my things at Thingiverse.
My Makerbot Replicator is printing a Watering Can as i type.
Bye for now and be well.
"set aside"
"i had set aside this originally and not licenced or uploaded it to any site."
I do this sometimes because, either the licence fell threw, the project failed, I decided it
was not to be uploaded, all sorts.
But this one I thought I'd show.
Thank you.