RCExplorer V3 inspired tricopter mini (295mm wheelbase) by Motorpixiegimbals

Last crawled date: 3 years ago

All the 3D printed parts needed to make a RCExplorer V3 inspired mini tricopter.
This work is heavily based on David Windeståls brilliant design and work. Please support David by getting the missing parts off his website: rcexplorer.se/shop. You can even buy the full size frame and just cut the arms to length.
Use ten M3x20 hex for the frame
Use ten M3 lock nuts
Use one M3x35 for the tilt mechanism
Use Afro 20A slim ESCs
Use Multistar Elite 2204 2300Kv for motors
Use 6x3" gemfan carbon props
Use Flip32+ flight controller
Use 6+ channel radio
Use 3S up to 2200mAh lipo
Use 18AWG wiring
Use a Blue Bird – BMS-210DMH Servo for the tilt mechanism
Use 160x10x10mm woven carbon fiber booms - (Cut these in half http://rcexplorer.se/product/10x10mm-woven-carbon-fiber-arm/)
Use 1.5mm pianowire for dampening wires (http://rcexplorer.se/product/pre-bent-vibration-dampening-wire/)
Get RCExplorer.se power distribution board integrated into the frame once it gets available!
Learn how to assemble a tricopter from the King of Tricopters! http://youtu.be/kvZGA6dJQJs
Sample footage:http://youtu.be/oGvY1ehM_Vs