Thingiverse
RC tank tracks by Evilman
by Thingiverse
Last crawled date: 3 years ago
I tried a few designs others had made, in end I found them all lacking.
These will print without support needed...since I find supports annoying. And can have rubber pads glued to them for additional traction.
these tracks printed 100% will be 75mm wide 15.5mm tall and 30mm long each. They are designed to use a single 3mm pin to hold each link together. I will be adding the sprocket as soon as it finishes print and I can prove it works like I want it too....idlers and suspension to come as I complete and test each. Drive sprockets will be designed around Traxxas Tmaxx 14mm hex drives for simplicity. Posted in .stl format
10/29/14
I will add parts as designed 1 every day or two, unless life gets in the way...had to design and print rc car temporary spare A-arms for 7 yr olds rc car that broke last night
if someone needs wider or narrower tracks and is using repetier for printing they should with careful thought be able to scale these to suit. bigger and wider always easier when scaling parts.
not entirely sure I like current idler design.... working up a different option that may be better all around and more compact....suggest you wait for it. NEW DESIGN OUT
10/30/14
ok I haven't printed out the newer two piece idler yet same bearing size but intended to run inside the track instead, I will print it and report tomorrow as I have printer running marathon session right now making an ectsbot printer for a friend....7 hrs left on print.
10/31/14
made an error on upload...pulling and replacing idler....sigh sorry about that if someone printed it out.
A is one half D the other half
11/2/14
Pics of idler system posted...I know funny colors....
almost ready to release fully functional idler assembly. I opted for a cartridge style system so that each pair idlers is supported by a mount, arm, shock/coil spring, and brace. this can neatly be screwed or attached by other means to your chassis. I will make a suspension free bracket as well for those who don't want the complexity of suspension. Currently I am using hobbyking 1/16 scale oil filled shocks...will be getting the aluminum ones soon for my son's buggy so I will have freebie plastic ones so to speak. I apologize for the time between released parts...but I really want this to be trouble free for you guys... especially since not all people who print 3d also design their own stuff.
have a nice night....not much will happen before Thursday night this week.
11/7/14
ok had a small issue with original idler wheels not always aligning tracks....so made an optional part that has sprocket teeth that force alignment so that tracks can not slip off wheels... included the autodest123d file for it as well as the .stl in case someone wants to modify it, also uploaded autodest123d file for tracks...figured someone might want wider ones or narrower...or something and this way it is easier to modify the basic track design.
I was ready to release the rest of the suspension for the idlers but with the redesign of the wheel comes a need to redesign the suspension. If anyone interested in me continuing to add the autodesk123d files as well please let me know, I hope anyone printing these will be willing to overlook the time between releases and the changes that I found needed.
These will print without support needed...since I find supports annoying. And can have rubber pads glued to them for additional traction.
these tracks printed 100% will be 75mm wide 15.5mm tall and 30mm long each. They are designed to use a single 3mm pin to hold each link together. I will be adding the sprocket as soon as it finishes print and I can prove it works like I want it too....idlers and suspension to come as I complete and test each. Drive sprockets will be designed around Traxxas Tmaxx 14mm hex drives for simplicity. Posted in .stl format
10/29/14
I will add parts as designed 1 every day or two, unless life gets in the way...had to design and print rc car temporary spare A-arms for 7 yr olds rc car that broke last night
if someone needs wider or narrower tracks and is using repetier for printing they should with careful thought be able to scale these to suit. bigger and wider always easier when scaling parts.
not entirely sure I like current idler design.... working up a different option that may be better all around and more compact....suggest you wait for it. NEW DESIGN OUT
10/30/14
ok I haven't printed out the newer two piece idler yet same bearing size but intended to run inside the track instead, I will print it and report tomorrow as I have printer running marathon session right now making an ectsbot printer for a friend....7 hrs left on print.
10/31/14
made an error on upload...pulling and replacing idler....sigh sorry about that if someone printed it out.
A is one half D the other half
11/2/14
Pics of idler system posted...I know funny colors....
almost ready to release fully functional idler assembly. I opted for a cartridge style system so that each pair idlers is supported by a mount, arm, shock/coil spring, and brace. this can neatly be screwed or attached by other means to your chassis. I will make a suspension free bracket as well for those who don't want the complexity of suspension. Currently I am using hobbyking 1/16 scale oil filled shocks...will be getting the aluminum ones soon for my son's buggy so I will have freebie plastic ones so to speak. I apologize for the time between released parts...but I really want this to be trouble free for you guys... especially since not all people who print 3d also design their own stuff.
have a nice night....not much will happen before Thursday night this week.
11/7/14
ok had a small issue with original idler wheels not always aligning tracks....so made an optional part that has sprocket teeth that force alignment so that tracks can not slip off wheels... included the autodest123d file for it as well as the .stl in case someone wants to modify it, also uploaded autodest123d file for tracks...figured someone might want wider ones or narrower...or something and this way it is easier to modify the basic track design.
I was ready to release the rest of the suspension for the idlers but with the redesign of the wheel comes a need to redesign the suspension. If anyone interested in me continuing to add the autodesk123d files as well please let me know, I hope anyone printing these will be willing to overlook the time between releases and the changes that I found needed.
Similar models
thingiverse
free
Snap together rc tank tracks ten versions up to 125mm wide by Evilman
...e, links are very tight,,,,soak in hot water before linking or they may break.
when i get printer fixed will do wheels for these.
thingiverse
free
Tank, Sprockets, Mag Idler Wheels, Suspension Arms by fastmike75
...l print without support and save print time. have not had a chance to test these yet, but the design should hold up just as well.
thingiverse
free
Legion Super Heavy replacement drive sprockets and treads by LordUglor
...either the flat backed ones, or you need to snip off the little bumps so they lay flat on the wheel.
designed for resin printers.
grabcad
free
3D Printable Shock Absorber Designs
...few designs to 3d print rc shock absorbers. i wanted to create these for use on various rc vehicle designs depending on the need.
thingiverse
free
RC Tank Track by stevedjarrell
...hem.
i could not find an existing track i liked or in 3" so i made one... also added the drive shaft mount i have started.
thingiverse
free
Tank Tracks *Extremely Early Phase* by Jpsnow6
... drive wheel to an idler wheel. any input would be great... i am working on the suspension system now. will update when finished.
thingiverse
free
Anet A8 X Belt Tensioner (for simhopp idler and gear) by anotherhowie
...ut wider in the cavity for the idler.
edit: may 7th 2018 - added the fusion 360 file, so you can tweak dimensions if you need to.
thingiverse
free
RC Tracks by Tory
...y rc car.
i am going to be using it in the snow and wanted to have more traction so i made the pads thicker and just a bit wider.
thingiverse
free
Creawler Track and Sprocket
...creawler track and sprocket
thingiverse
needs work, but a starting point for someone who wants to take it further...
thingiverse
free
RC 1/14 King Hauler Back by rcdesigna
...d this.
please note: this is not 100% perfect as i have not had to much experience designing.
this will require sanding.
enjoy :)
Evilman
thingiverse
free
Hobber powered by hand drill by Evilman
...mple design easily printable.
intent is to print all three parts only needing 3 608 bearings the bold and a tap of your choosing.
thingiverse
free
hobbing jig...bolt holder by Evilman
...riginal is designed for 3/8" atlas toolpost... it is 9.5mm wide download and mod the autodesk123d file if yours is different
thingiverse
free
spool stand one piece design by Evilman
... that a dowel or broom stick cut off would be just as usefull. if wanted i can add the rods caps and even design a printable rod.
thingiverse
free
Snap together rc tank tracks ten versions up to 125mm wide by Evilman
...e, links are very tight,,,,soak in hot water before linking or they may break.
when i get printer fixed will do wheels for these.
thingiverse
free
Tank track...snap thin links Redesigned final mod is pinned instead of snapped... by Evilman
...ain it would be modb and so on
ok i leaving this to someone else....
redesigned with 3mm pin for the hinge....works fine that way
Rc
3ddd
$1
RC Helicopter
...rc helicopter
3ddd
вертолет
mini rc helicopter
93.329 polys
3d_export
$7
rc helicopter model
...rc helicopter model
3dexport
rc helicopter model
3d_ocean
$25
RC F1
...rc f1
3docean
auto car control f1 formula race rc remote speed
remote control f1 car
turbosquid
$10
rc plane
...lane
turbosquid
free 3d model rc plane for download as blend on turbosquid: 3d models for games, architecture, videos. (1295828)
turbosquid
$100
RC Helicopter
...free 3d model rc helicopter for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1298511)
turbosquid
$59
Drone with RC
...3d model drone with rc for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1363601)
turbosquid
$75
RC buggy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
RC Plane001
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
RC Jet
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Rc airplane
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Tracks
design_connected
$11
Tracks
...tracks
designconnected
bonaldo tracks computer generated 3d model. designed by gilles, alain.
3d_export
$30
TRACK
...track
3dexport
turbosquid
$20
tracks
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Tracks
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Track
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Track
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$65
track
...track
3dexport
simple rendering of the scene file
3d_export
$65
track
...track
3dexport
simple rendering of the scene file
3d_export
$65
track
...track
3dexport
simple rendering of the scene file
3ddd
free
Стол Bonaldo Tracks
...onaldo , tracks , обеденный
стол bonaldo tracks
Tank
archibase_planet
free
Tank
...ibase planet
tank tank-wagon tank-truck tank-car
tank train small n110113 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3d_ocean
$49
Tank
...tank
3docean
kv-1s tank
tank kv-1s
archibase_planet
free
Tank
...tank
archibase planet
tank medium tank
tank wmcvun n070712 - 3d model (*.3ds) for exterior 3d visualization.
archibase_planet
free
Tank
...k
archibase planet
tank light tank bt-2 high-speed tank
tank bt-2 n200814 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3d_export
$5
tanks
...tanks
3dexport
tanks
3d_export
free
tank
...tank
3dexport
tank
archibase_planet
free
Tank
...tank
archibase planet
tank heavy tank
tank abrams l n090511 - 3d model (*.3ds) for exterior 3d visualization.
archibase_planet
free
Tank
...tank
archibase planet
tank medium tank
tank m60 n070712 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Tank
...tank
archibase planet
tank medium tank
tank female n070712 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3d_export
$5
tank
...tank
3dexport
tank lowpoly