Thingiverse
RB3 Extruder Cable Restraint by JP1
by Thingiverse
Last crawled date: 3 years, 4 months ago
An extruder cable restraint made specifically for the ReliaBuild RB3 printers, RB2's, and upgraded Rigidbot RB1's with the RB2 electronics and cables.
This is a two part system comprising of the restraint and a locking clip. The pieces are installed around the cable by slipping a flattened section of the cable above the extruder through the slot and then slipping the piece down for snapping into place at the top of the extruder. The clip keeps the cable from working itself back through the slot when moving around and eliminates the need for a zip tie to be used.
This is a tight tolerance and snug fitting assembly. Use of thermally calibrated filament using these clips to calibrate it is highly recommended for best results.https://www.thingiverse.com/thing:1037301
Note the assembly orientation of the extruder PCB and the restraint base. The side of the PCB with the stepper connection is towards the back side of the restraint. See the uploaded pictures for reference. If the PCB on your printer is flipped around then install the restraint accordingly.
This is a two part system comprising of the restraint and a locking clip. The pieces are installed around the cable by slipping a flattened section of the cable above the extruder through the slot and then slipping the piece down for snapping into place at the top of the extruder. The clip keeps the cable from working itself back through the slot when moving around and eliminates the need for a zip tie to be used.
This is a tight tolerance and snug fitting assembly. Use of thermally calibrated filament using these clips to calibrate it is highly recommended for best results.https://www.thingiverse.com/thing:1037301
Note the assembly orientation of the extruder PCB and the restraint base. The side of the PCB with the stepper connection is towards the back side of the restraint. See the uploaded pictures for reference. If the PCB on your printer is flipped around then install the restraint accordingly.
Similar models
thingiverse
free
ReliaBuild 3D Extruder Carriage Mounted Limit Switch System by JP1
...s it is highly recommended that you use calibrated filament using the system found here: http://www.thingiverse.com/thing:1037301
thingiverse
free
RB3 Flat LCD Face Plates. by JP1
...s it is highly recommended that you use calibrated filament using the system found here: http://www.thingiverse.com/thing:1037301
thingiverse
free
Heated Bed Connection Protective Cover by JP1
...filament for best fit results. the clips found here work really well for calibration. https://www.thingiverse.com/thing:1037301
thingiverse
free
Back (Extruder) Cable Clip (Ender 3) by timqui
...bed movement by cables going to the extruder (higher z values).
infill: 15 %, support: no, print it on its back (as blue render).
thingiverse
free
V-Slot Clip On Cable Clip by SynJa
...nder 3 or even a creality printer; any printer using profile extrusions/v-slot rails/whatever-you-call-them will work with this.
thingiverse
free
Tiny cable clip for 20x20 extrusion
...ever against the extrusion to pull the clip out.
i'm using these to tidy up the extruder cable on my anycubic kossel printer.
grabcad
free
3D Printer Ribbon Cable Clip
... the ribbon cable from the display to the pcb board. i have prusa mk3, but will probably work on most printer extruded channels.
thingiverse
free
T-Slot Cable Clip by 50an6xy06r6n
... have to disassemble anything to install them. freecad source included in case you want to modify it for use with other profiles.
thingiverse
free
Yet another QIDI X-PLUS / X-MAX Ribbon Cable Clip by Oldcorollas
...bunch up.
also if extruder cooling duct has been installed,more warm air will be directed onto the ribbon cable, effects unknown.
thingiverse
free
Filament Anti-De-Spooler Arm by JP1
...ed that you use thermally calibrated filament using these calibration clips found here: https://www.thingiverse.com/thing:1037301
Rb3
3d_export
$79
F1 Red Bull RB3 2007 3D Model
...b3 2007 3d model
3dexport
redbull f1 david coulthard mark webber toro rosso
f1 red bull rb3 2007 3d model marcel23d 3463 3dexport
thingiverse
free
Landing gear legs F450 Q450 by RB3
...se
remixed from greasetattoo original design. sweeping the other direction and without spikes. fits my hobbyking q450 frame/arms
thingiverse
free
RB3 Flat LCD Face Plates. by JP1
...s it is highly recommended that you use calibrated filament using the system found here: http://www.thingiverse.com/thing:1037301
thingiverse
free
USB port shield - For RB3 and RBB3 Aluminum Backplate by JP1
...ation clips linked below to account for both dimensional and thermal filament properties.http://www.thingiverse.com/thing:1037301
thingiverse
free
RB3 Tilted LCD Face Plates by JP1
...s it is highly recommended that you use calibrated filament using the system found here: http://www.thingiverse.com/thing:1037301
thingiverse
free
4E3D Main Board Cover - RB2, RB3, RB & RBB upgrades by JP1
...tp://www.thingiverse.com/thing:1712645http://www.thingiverse.com/thing:1661859
the file is cura scaled and oriented for printing.
thingiverse
free
Turnigy Lipo 2.2 3C Battery holder for Q450 F450 DJI by RB3
... of pintokitkat's battery holder. this remix holds a turnigy 2.2 3c battery. i am using it on my hobby king q450 quad-copter.
thingiverse
free
RB3, RBB3, and RB2 part cooling ducts - bolted fans by JP1
...these two methods below is highly recommended.
https://www.thingiverse.com/thing:1037301https://www.thingiverse.com/thing:2502677
thingiverse
free
BrewPiLess enclosure with encoder and duplex outlet by RB3
...tle_o01_s00?ie=utf8&psc=1 -https://www.amazon.com/gp/product/b07dm2ymt4/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1
Jp1
turbosquid
$18
jp1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Mod of JP1's Death Star Turret for Lego by ICanMakingThings
...nclude a destroyed turret conversion. it opens up all sorts of options. find it here... http://www.thingiverse.com/make:178576
thingiverse
free
RBB3-XL Name Plate by JP1
...our own front plates this name plate replaces the reliabuild 3d name plate found here: https://www.thingiverse.com/thing:2096308
thingiverse
free
BUTToN GEAR FOREVER by JP1
...
https://www.thingiverse.com/thing:1037301https://www.thingiverse.com/thing:2502677
a good part cooling fan helps as well.
enjoy!
thingiverse
free
Ammo clip loader Pin by JP1
....
the stl file is cura scaled and oriented for printing. note the printing instructions to get a strong accurately printed part.
thingiverse
free
BUTToN GEAR by JP1
...and a button installed on a boot.
for further details see the original style post here: http://www.thingiverse.com/thing:1117591
thingiverse
free
Spool Hub - 56mm to 8mm by JP1
...include the source file with object units in mm and scene units in inches. the cs file is cura scaled and oriented for printing.
thingiverse
free
ID Badge Holder by JP1
... is extra security to keep the two parts together when strapped to your arm.
the parts are cura scaled and oriented for printing.
thingiverse
free
Can Handle - High Resolution by JP1
...ted in pla but i would not leave it in a hot car when using that material.
the stl file is cura scaled and oriented for printing.
thingiverse
free
Spool Hub 54mm x 8mm with tapered shims by JP1
...ated filament for best results using the clip system found here:http://www.thingiverse.com/thing:1037301
print two of these hubs.
Restraint
3d_export
$5
Restraint Chair 3D Model
...
3dexport
restraint chair control restriction limitation curtailment furniture
restraint chair 3d model uncle808us 59318 3dexport
3d_export
$14
Handcuffs 3D Model
...handcuffs 3d model 3dexport handcuff cuff police restraint handcuffs 3d model nakor 22288...
3d_export
$30
Handcuffs 3D Model
...handcuffs 3d model 3dexport handcuff restraint law police security enforcement fbi sheriff officer jail gaol...
3d_export
$10
Handcuffs 3D Model
...handcuffs 3d model 3dexport handcuffs lock law enforcement police restraint devices wrist chain hinge shackle custody criminal padlock policeman...
3d_export
$15
Ball and Chain 3D Model
...model 3dexport ball and chain prisoner shackle iron handcuffs restraint physical prison chaingang sphere leg gang law enforcement british...
3d_export
$10
Anchor Shackle 3D Model
...clevis pin bolt ships handcuffs boats moused threaded tapped restraint tow dock rope screw screwpin anchor shackle 3d model...
3ddd
$1
Omni Mirrored 3 Drawer Chest
...omni collection demonstrates a striking use of style and restraint while elegantly reflecting its surroundings this functional collection combines...
3d_ocean
$3
2 Instant Rope Textures
...gaming hawser hitch knot laces lanyard lariat lead noose restraint ribbon rope strand string tape thread tie twine 2...
3d_export
$14
restoration hardware avalon desk
...desk.<br>the sleek lines of our collection capture the sophisticated restraint of modernism, while its polished cast-metal fittings including recessed...
thingiverse
free
window restraint by Bati4eli
...window restraint by bati4eli
thingiverse
window restraint
Extruder
3ddd
$1
Extruded Chair
...extruded chair
3ddd
extruded , tom dixon
inspired by tom dixon extruded chair
turbosquid
$15
Extruded Table
... extruded table for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1634137)
turbosquid
$2
3D Printer Extruder
...d
royalty free 3d model 3d printer extruder for download as on turbosquid: 3d models for games, architecture, videos. (1537359)
turbosquid
$1
Zombie extruded text
...oyalty free 3d model zombie extruded text for download as obj on turbosquid: 3d models for games, architecture, videos. (1322198)
turbosquid
$4
Extruder conical screw
...el extruder conical screw for download as sldpr, ige, and stl on turbosquid: 3d models for games, architecture, videos. (1524433)
turbosquid
$50
3d PRINTER - Extruder
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Extruded Table 2
...xtruded table 2 for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1621846)
turbosquid
$10
Maya Extrude Tool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
world earth extrude map
...world earth extrude map
3dexport
3ddd
$1
Simply Elegant Extruded Tree Coffee Table Design
...ble by link studios. the silhouette of a tree is visible at one angle, extruded from the surface to create the support structure.
Cable
3d_export
free
Cables
...cables
3dexport
cables for your purposes
3d_export
free
cable belt for cable organization
...ze your cables in 3d printers. it will bend only to one direction. the area to put the cables per piece is aprox. 1,6cmx2,6cmx1cm
3d_ocean
$16
Ethernet Cable
...ethernet cable
3docean
cable computer electronics ethernet internet network connected
ethernet cable 3d model
3d_export
$65
cable
...cable
3dexport
simple rendering of the scene file
turbosquid
$14
Cable
...l cable for download as ma, max, fbx, 3ds, gltf, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1631358)
3ddd
$1
Cable Cover
...cable cover
3ddd
кабель
vertebra passacavo - cable cover
max + vray 2.20.03
3d_export
$15
Cable reel
...without cable. textures 4k 4096x4096 targa, png, jpeg.<br>number of polygons without cable: 2896<br>with cable: 35328
3d_export
$7
short cable
...short cable
3dexport
rubber cord. very detailed. cable thickness: 2.55 mm total length: 55mm
3d_export
$5
USB CABLE
...usb cable
3dexport
turbosquid
$30
Cable Reels
...osquid
royalty free 3d model cable reels for download as fbx on turbosquid: 3d models for games, architecture, videos. (1439507)