Raspi NoIR Nightvision camera by ebastler

Last crawled date: 3 years ago

I had more or less everything lieing around, so I decided to design this enclosure for the IR LEDs, the raspi and the NoIR cam and built it.
It is still not perfect, but everything sits fine and works like a charm.
Information on the parts I used and the code are located unter instructions.
22.02.2015: The walls seem a bit too thin, a piece of mine broke off, now it won't keep closed very well. Improved version incoming!
25.02.2015: I uploaded rev2 files.
Changes:

front got thicker walls (3mm instead of 2mm)
Where the walls get thinner to slide into one another they are now 1.5mm thick instead of the very easy to crack 1mm thick walls
Nut-holder for tripod-mount is now closed by the front when the case is assembled, looks nicer.
Back piece is now only 1.5mm thick instead of 2mm.
Some minor changes
It should now take a bit more time and material to print, but be much more durable and stable.

28.02.2015: Just printed rev2. It prints nicely, everything fits (The IR spotlight fits a bit better, actually), and it is way more stable (and once closed it stays closed, it's actually a bit tricky to reopen it). Not as fragile as rev1.
19.09.2015: Finally took the time to delete the rev1 images, and add some rev2 images, instead!