Thingiverse
RaspberryPi Universal 2 bays case by HALPisHERE
by Thingiverse
Last crawled date: 2 years, 10 months ago
Eng:
I designed this case to hold a Raspberry Pi 4 and two external SSD drives but it can be used for older Raspberries as the holes for the ports are just big squares (intended for designing custom plates to cover the squared holes and surround the ports). It also has a space and screw places for a 6-8 cm diameter fan.
I included the FreeCad files so you can customize it to your needs.
The external SSD bays are 8,3cm x 2cm x 13 cm. There are two holes to connect the USB cables to them, you need to verify they are in the right place and if not, use the FreeCad files included to move them around, same thing with the walls for the SSDs.
I used random screws I had laying around, so i can't give exact directions about them. I put them in place with a screwdriver and then applied some heat with a solder to make sure they stay in their place. I used pointy screws for the fan, so I just put them in place without hassle.
No supports or brims required (supports for the port holes are included, you must remove them with pliers).
ESP:
He diseñado esta caja para una Raspbery Pi 4 (sirve para modelos anteriores también), un ventilador y dos discos externos (en mi caso SSDs). Los agujeros para los puertos son cuadrados, por eso es universal, la idea es que los usuarios puedan diseñar las placas a su medida para tapar el agujero y dejar los puertos expuestos de manera más bonita. También tiene espacio para atornillar un ventilador de entre 6 y 8 cm de diámetro.
He incluido los ficheros de Freecad para que puedas editarlo a tu medida.
Los espacios para los SSD son de 8,3cm x 2cm x 13 cm. Hay dos agujeros en las bahías para poder conectar los discos a los puertos USB, tienes que verificar que le sirvan a tus discos, si no, tendrás que editar el fichero de Freecad que incluí. Si tus discos no caben, también puedes editar las bahías para que quepan.
Usé tornillos que tenía por ahí tirados, así que no puedo dar indicaciones de cuáles puedes usar. Yo atornillé la Raspberry y le di calor a los tornillos con un soldador para que se quedaran bien fijados. Para el ventilador usé unos tornillos con punta (los del mismo ventilador) así que simplemente los atornille directamente.
No se necesitan soportes ni placas de adhesión, los agujeros de los puertos ya traen soportes, vas a tener que quitarlos con unos alicates.
I designed this case to hold a Raspberry Pi 4 and two external SSD drives but it can be used for older Raspberries as the holes for the ports are just big squares (intended for designing custom plates to cover the squared holes and surround the ports). It also has a space and screw places for a 6-8 cm diameter fan.
I included the FreeCad files so you can customize it to your needs.
The external SSD bays are 8,3cm x 2cm x 13 cm. There are two holes to connect the USB cables to them, you need to verify they are in the right place and if not, use the FreeCad files included to move them around, same thing with the walls for the SSDs.
I used random screws I had laying around, so i can't give exact directions about them. I put them in place with a screwdriver and then applied some heat with a solder to make sure they stay in their place. I used pointy screws for the fan, so I just put them in place without hassle.
No supports or brims required (supports for the port holes are included, you must remove them with pliers).
ESP:
He diseñado esta caja para una Raspbery Pi 4 (sirve para modelos anteriores también), un ventilador y dos discos externos (en mi caso SSDs). Los agujeros para los puertos son cuadrados, por eso es universal, la idea es que los usuarios puedan diseñar las placas a su medida para tapar el agujero y dejar los puertos expuestos de manera más bonita. También tiene espacio para atornillar un ventilador de entre 6 y 8 cm de diámetro.
He incluido los ficheros de Freecad para que puedas editarlo a tu medida.
Los espacios para los SSD son de 8,3cm x 2cm x 13 cm. Hay dos agujeros en las bahías para poder conectar los discos a los puertos USB, tienes que verificar que le sirvan a tus discos, si no, tendrás que editar el fichero de Freecad que incluí. Si tus discos no caben, también puedes editar las bahías para que quepan.
Usé tornillos que tenía por ahí tirados, así que no puedo dar indicaciones de cuáles puedes usar. Yo atornillé la Raspberry y le di calor a los tornillos con un soldador para que se quedaran bien fijados. Para el ventilador usé unos tornillos con punta (los del mismo ventilador) así que simplemente los atornille directamente.
No se necesitan soportes ni placas de adhesión, los agujeros de los puertos ya traen soportes, vas a tener que quitarlos con unos alicates.
Similar models
thingiverse
free
Soporte tira de leds by Ivanselles
...sta en fichero en freecad para poder editar estas medidas y ajustarlas a las que necesites.
yo lo he impreso en pla transparente.
thingiverse
free
rack para raspberry pi con SSD opcional y switch PoE by ppernias
...ierta delantera para cuando queda un slot de raspberry pi libre o se usa un disco ssd. solo es decorativa y se inserta a presión.
thingiverse
free
Fan support by DavidAmigo5
...ventilador de 80mm. los agujeros son de 3mm para la sujeciã³n en el marco de aluminio y de 4mm para los tornillos del ventilador.
thingiverse
free
caja SKR 1.3/1.4 by skarion
...y 4 tornillos de m3x10
los soportes van cogidos a los perfiles de aluminio con 4 tuercas de martillo de m5 y 4 tornillos de m5x10
thingiverse
free
Porta SSD para Mac Pro. by jpo41
...ecuadamente en su sitio.
.
print settings.
printer brand: anet
printer: a6
rafts: no
supports: no
filament: bq easy go pla negro
thingiverse
free
SOPORTE VENTILADOR DE CAPA PRUSA I3 / FAN DUCT SUPPORT by DunkyDesigns
...étrica 6 y los que sirven para acoplar el mismo ventilador a la placa son de 4. colocar bien el stl para no necesitar más soporte
thingiverse
free
rejilla para ventilador 80x80 inspiración fallout by diegomb
...inspiración fallout by diegomb
thingiverse
rejilla protectora para ventiladores de 80x80 y agujeros para tornillo de métrica 3.
thingiverse
free
raspberry pi case & switch case para rack 19' by ppernias
...delo tendrá dos versiones: la que se puede ubicar en un rack de 19' y la que simplemente es apilable encima de un escritorio.
thingiverse
free
Tornillo/Grampa para manta aislante de Capot Xsara Picasso by alcidesb
...a aislante del capot del citroen xsara picasso.
lo diseñe en freecad 0.18 y también dejo el archivo para que puedan modificarlo.
thingiverse
free
Adaptador SSD Hp prolian G6 G7 by kacitran
...base solo poner dos los mas cercanos al conector sata.
se corrijo el orificio que se muestra en la foto que se tuvo que desplazar
Halpishere
thingiverse
free
Sign HALP by HALPisHERE
...iverse
just a picture of a guy in flames asking for halp. picture and letters are extruded a little bit. you need to paint them.
thingiverse
free
Screwdriver box by HALPisHERE
... freecad para poder editarlo). se cierra correctamente y para abrirlo o cerrarlo tienes que tirar un poco de la punta de la tapa.
thingiverse
free
100ml Vape Juice Holder 8 Slots by HALPisHERE
...que fuera de 8. he redondeado los bordes y las esquinas porque soy lo suficientemente tonto como para pincharme un ojo con ellas.
Raspberrypi
thingiverse
free
board on the Raspberrypi by bacon0817
...board on the raspberrypi by bacon0817
thingiverse
mount the rgboard on the raspberrypi
thingiverse
free
RaspberryPi Rack by imagifab
...raspberrypi rack by imagifab
thingiverse
simple rack to keep a raspberrypi off of a workstation.
thingiverse
free
RaspberryPi 3B+ Case
...raspberrypi 3b+ case
thingiverse
this is a case for raspberrypi 3b+. the covers are snap fit. you can choose from two covers.
thingiverse
free
SBC Case-RaspberryPi by XSHELL
...sbc case-raspberrypi by xshell
thingiverse
raspberrypi case designed by xshell inc.
thingiverse
free
Raspberrypi logo by dpruim
...errypi logo with openscad source
i used it as ornament on my case..
and there are 8 spacers in there as well that i needed. . .
thingiverse
free
RaspberryPi 3 case with ender logo by freddysphoto
...perfectly.
raspberrypi 3: works perfectly.
raspberrypi 2: should fit. feedback?
raspberrypi b+: community reported that it works.
thingiverse
free
RaspberryPi SDCard retainer by IndianaTux
...en if the raspberrypi is subjected to vibration.
as always source available on my github: https://github.com/netforces/hardware
thingiverse
free
RaspberryPI 1Bp 2 and 3
...raspberrypi 1bp 2 and 3
thingiverse
raspberrypi 1b+ 2 and 3
with sd card added.
and real ethernet, real usb,
thingiverse
free
SSD - RaspberryPI case by cgerrist
...ypi case by cgerrist
thingiverse
a little case for a ssd and raspberrypi 3
together it is my personal nas with a mysql database.
thingiverse
free
RaspberryPi stand by Schorhr
...raspberrypi stand by schorhr
thingiverse
moep.
sick & bored.
Bays
3ddd
$1
Bay
...bay
3ddd
calligaris
стул bay итальянской фабрики сalligaris /max2011,fbx,obj,mat/
3ddd
$1
MDF / BAY
...mdf / bay
3ddd
bay , mdf italia
диван "bay"
*turbosmooth присутствует
turbosquid
$8
Bay
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
BAY XL
... giulio marelli
giulio marelli italia. bay xl.
диван, дизайн studio crgm в тканевом исполнении.
длина: 2.55
design_connected
$18
Bai Armchair
...bai armchair
designconnected
ondarreta bai armchair computer generated 3d model. designed by lizaso, ander.
3ddd
$1
Kichler Hayman Bay
...kichler hayman bay
3ddd
kichler , hayman bay
люстра kichler lighting 43256daw hayman bay
design_connected
$13
Bai Chandelier
...bai chandelier
designconnected
parachilna bai chandelier computer generated 3d model. designed by neri&hu.
3ddd
$1
Lamp poters bay
...lamp poters bay
3ddd
eichholtz
eichholtz, lamp poters bay
turbosquid
$32
Shuttle Bay
...ty free 3d model shuttle bay for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1475258)
turbosquid
$20
Iris Bay
...free 3d model iris bay for download as 3ds, c4d, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1367781)
Universal
3d_export
$20
university
...university
3dexport
university model with textures.
3d_export
free
steven universe
...steven universe
3dexport
steven universe
3ddd
free
Quasar Universe
...quasar universe
3ddd
quasar
люстра quasar universe
turbosquid
$65
Universal
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$65
University
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Universal
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$40
Graphics Universe Universe Flares 3D Model
...graphics universe universe flares 3d model
3dexport
textures
graphics universe universe flares 3d model crashangel 97554 3dexport
3d_export
$65
universe
...universe
3dexport
simple rendering of the scene file
3d_export
$65
university
...university
3dexport
simple rendering of the scene file
3ddd
$1
Gala Universal раковина
...universal раковина
3ddd
gala , universal
раковина
производитель gala
коллекция universal
Case
3d_export
$1
case
...case
3dexport
case
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
2
design_connected
$11
No 2
...no 2
designconnected
sibast no 2 computer generated 3d model. designed by sibast, helge.
turbosquid
$6
Cliff Rock 2-2
...uid
royalty free 3d model cliff rock 2-2 for download as obj on turbosquid: 3d models for games, architecture, videos. (1619161)
turbosquid
$29
Book variation 2 2
...3d model book variation 2 2 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1366868)
turbosquid
$22
Classic baluster (2) (2)
...assic baluster (2) (2) for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1483789)
turbosquid
$99
Smilodon 2 Pose 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Barrel Barricade 2-2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Wall Trophy (2) (2)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Tire label 2 of 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур
3ddd
free
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур