Raspberry Pi3 Mount for Lulzbot Mini with built in Regulator Mounts by Noggin011

Last crawled date: 3 years ago

This is a remix of a really great Pi mount from 0110-M-P, I have added mounting points to suit the lulzbot mini using the existing holes above the electronics box.
This mount also has room under the pi for 2 regulators, I used the printers power supply to also power the raspberry pi removing the need for lots of power outlets. The second regulator is to supply 5v to a wireless access point to make the printer completely self sufficient. See my other things for the WAP mount to match.
You will need the one bottom piece, one top piece and a grille, these can be printed in any combination of colour. I used super glue to attach the grille. The lid is screwed to the base with 4x M3 socket head bolts.
I used a tap to thread the existing holes in the lulzbot mini and then attached the mount with M5 bolts.