Raspberry Pi Microscope (Remix of BraunsCNC's designs)

Last crawled date: 4 years, 3 months ago

Toss me a like, a comment, a photo of prints, or even a tip if you like my work!
I enjoyed this awesome design from BraunsCNC but I wanted to make some modifications.
Brass Inserts
I made the models for 3 mm brass inserts which allow for a nice look overall.
I added some retention to the system to ensure that one of the mounts does not fall off and onto the stage.
Here is the link for the brass inserts that I used (no affiliation): Heres the link for the brass inserts I planned the microscope remix on:
https://www.amazon.com/gp/product/B00Y20YLKY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Camera Mount Holder
The camera mount has been adjusted to fit a Raspberry Pi camera ver 2.1 and allows room for the component to fit well into the grooves. So far, I have not tested it with a NoIR camera since I don't have one but would be interested to hear feedback. Looking at the link provided, it seems like it would fit with my redesigned camera mount holder.
Raspberry Pi 4 Bracket
I added a bracket to allow you to either use a Raspberry Pi zero or a Raspberry Pi 4. I am still playing around with the bracket but it has worked so far on my testing. The bracket can be attached using ~ 6 mm screws. The "spacers" from BraunsCNC's original design are optional if using this bracket.
There are 4 spots on the back of the large mount that will allow you to place the Raspberry Pi 4 mount on the back if desired.
Base
The base (microscope stage) was modified to allow for a lip around the opening for the 12mm linear rod.
BOM
Print 1 of each item except the knob.
Print 2 knobs.