Raspberry Pi Camera Mount for Prusa MK3 by stusona

Last crawled date: 3 years, 1 month ago

Couldn't find a simple camera mount for the raspberry pi camera on the Prusa MK3, so I made one. Inspired by the many mounts on the X-axis motor. Great idea! Uses an M3x18 to mount to X-axis motor.
I used a M3x10 with a locknut to tighten the ball joint. I've found those joints are tough to get just perfect by friction fit, so this is loose enough to pop in/out, move to position, then you can tighten it down so it'll never move.
The camera fit is a bit loose, so you can deform the plastic a bit to snug it in there. Depends on how true-to-size your prints are. I figure it's better to oversize by a tiny bit then use something to keep it in there.
Here are STLs and STEPs. Follow this link for the fusion project:https://a360.co/2wBCD7e