Thingiverse
Raspberri Pi + HDD Enclosure by dbatkins
by Thingiverse
Last crawled date: 2 years, 11 months ago
I was messing around with turning my Raspberry Pi into a Plex Server, when I decided I wanted a single enclosure for both components. This fits a Raspberry Pi 4B, and a 3.5" HDD, and it sized to fit a random SATA to USB 3 connector.
Warning!!! The opening for the HDD SATA to USB3 connector is probably going to be totally different for your stuff. I HIGHLY recommend making sure it's the right size. Mine required a bit of filing afterward to fit snugly. While this was by design on my part, you may be sad if you didn't expect it.
The two lids are snap closures, with tight tolerances. As in,. I had to cut away a few things to make it fit perfectly. Again, I mostly meant to do that :-)
Please note, all the screw holes are set for 3mm screws. It's a little tight for the Raspberry Pi mounting holes, but those are the screws that I had on hand, so there. Fan mounting holes are for a standard 30mm Pi Case Fan.
Printing:
Infill - Adaptic Cubic 20% was used. Big whoop.
I printed it with a 0.6mm nozzle, in PLA.
I used the default "Support on build plate only" option in Prusa Slicer, and "Don't support bridges". This does leave a bit of stringiness in the Pi enclosure part, but it's on the inside and I didn't care!
Please see the picture of the splicer output for positioning and junk.
Warning!!! The opening for the HDD SATA to USB3 connector is probably going to be totally different for your stuff. I HIGHLY recommend making sure it's the right size. Mine required a bit of filing afterward to fit snugly. While this was by design on my part, you may be sad if you didn't expect it.
The two lids are snap closures, with tight tolerances. As in,. I had to cut away a few things to make it fit perfectly. Again, I mostly meant to do that :-)
Please note, all the screw holes are set for 3mm screws. It's a little tight for the Raspberry Pi mounting holes, but those are the screws that I had on hand, so there. Fan mounting holes are for a standard 30mm Pi Case Fan.
Printing:
Infill - Adaptic Cubic 20% was used. Big whoop.
I printed it with a 0.6mm nozzle, in PLA.
I used the default "Support on build plate only" option in Prusa Slicer, and "Don't support bridges". This does leave a bit of stringiness in the Pi enclosure part, but it's on the inside and I didn't care!
Please see the picture of the splicer output for positioning and junk.
Similar models
thingiverse
free
NAS Raspberry Pi Hdd Sata by mauroalfieri
... hdd sata by mauroalfieri
thingiverse
box nas hdd sata
lasercut box and 3d printed parts box.
raspberry pi 2 / 3 support mounts.
thingiverse
free
BrachioGraph mount for Raspberry Pi 4 by Charles148
...pberry pi, with the servo mount moved up by 1mm.
my inner arm kept falling off, so i printed one with mounting screw holes also.
thingiverse
free
Raspberry Pi 4 case with HDD Enclosure.
...pter i have is from startech and it sticks out the end, not the side, as the adapter used by msonst, so i also adjusted for that.
thingiverse
free
raspberry pi 3.5" hdd tray mount by yopzolo
...t by yopzolo
thingiverse
this box has the shape and holes of a standard 3.5" hdd.
fits inside any 3.5" hdd enclosure
thingiverse
free
Raspberry Pi 4B Wall Mount by MomsFreak
...erse
i had to make a wall mount for my raspberry pi 4b
i will make a publish of the enclosure some day too.
print with supports.
thingiverse
free
Raspberry Pi 3 Model B 30 mm Fan Mount by niftymaker
...e holes spacings and i'm unable to fix it, so i recommend using this remix instead: https://www.thingiverse.com/thing:3722799
thingiverse
free
Prusa Mk2/Mk3 LCD mount with Pi 4 Mount
...o fit through the pi's mounting holes). the fan mount fits a std 40mm x 10mm fan.
i printed in sainsmart tpu with 50% infill.
thingiverse
free
2.5 inch SATA Drive Caddy for Raspberry Pi 4 + CanaKit Case by keyboard_monkey
... on the raspberry pi 4, you can power and run a headless server booting and running on an ssd drive with just one ethernet cable.
thingiverse
free
HDD enclosure for Raspberry Pi (or SATA-to-USB) by costmo
...r the one i prefer, which turned out to be easy since it was designed with vesa mounts.
assembly info is in an attached pdf file.
thingiverse
free
Morninglion Industries Raspberry Pi Case Mounted SSD Enclosure by morganlowe
...l stack! you can use the one with magnet holes and some 8x3mm magnets to give it a nice snap when putting it together.
thank you!
Hdd
thingiverse
free
HDD by joselcl98
...hdd by joselcl98
thingiverse
hdd
thingiverse
free
hdd mount
...hdd mount
thingiverse
hdd mount for sunmicrosystem v490
thingiverse
free
2,5" HDD to the 3,5" HDD adapter by b_r_a_v_e
...hdd to the 3,5" hdd adapter by b_r_a_v_e
thingiverse
3d printed 2,5" hdd (ssd) to the 3,5" hdd place in computer.
thingiverse
free
HDD stand by mikbund
...hdd stand by mikbund
thingiverse
hdd stand for external 2.5" hdd drive.
thingiverse
free
HDD holder
...hdd holder
thingiverse
holder not only for hdd. end of mess in drawer. ;-)
on the underside is optimal addition of rubber feet.
thingiverse
free
SSD-HDD case
...ssd-hdd case
thingiverse
external hdd ssd.
thingiverse
free
HDD Mount by Reini71
...hdd mount by reini71
thingiverse
hdd mount in a 5,25 shaft with front mesh, for 3,5" and 2,5" hdd or ssd
thingiverse
free
HDD holder by Noerdz
...hdd holder by noerdz
thingiverse
hdd bracket for tv etc.
thingiverse
free
2.5" hdd storage box for hdd or ssd by chrisj2000
...2.5" hdd storage box for hdd or ssd by chrisj2000
thingiverse
i had lots of hdds on shelf, looked messy, problem solved
thingiverse
free
HDD ENCLOSURE by Laurent_91
...d enclosure by laurent_91
thingiverse
i designed this hdd enclosure to get a custom box for my external hdd samsung seagate 3 tb
Enclosure
thingiverse
free
Enclosure by KlimukVI
...enclosure by klimukvi
thingiverse
enclosure
thingiverse
free
Enclosure by silverfox
...enclosure by silverfox
thingiverse
trial enclosure
thingiverse
free
Enclosure
...enclosure
thingiverse
designed in catia
thingiverse
free
Enclosure
...enclosure
thingiverse
designed in catia
thingiverse
free
Enclosure
...enclosure
thingiverse
designed in catia
thingiverse
free
Enclosure
...enclosure
thingiverse
designed in catia
printed in hydra
thingiverse
free
Enclosure
...enclosure
thingiverse
designed in catia
printed in hydra
thingiverse
free
Enclosure Handle
...enclosure handle
thingiverse
handle for the plexiglass enclosure door for my cr-10.
thingiverse
free
Switch enclosure
...switch enclosure
thingiverse
switch enclosure as used in this youtube video
space in base for d1 mini
thingiverse
free
majikatek enclosure by ellenlangsetmo
...ure electronics enclosure for my electronics prodject the size of the enclosure is 22 x 14 inches by 2 and three quarture inches.
Raspberri
thingiverse
free
Raspberry Pi Display Case for Raspberry pi A+
...raspberry pi display case for raspberry pi a+
thingiverse
raspberry pi display case for raspberry pi a+
thingiverse
free
Raspberry by timon
...raspberry by timon
thingiverse
a raspberry model. originally created for use as an accessory in a halloween costume.
thingiverse
free
Raspberry Case
...raspberry case
thingiverse
this is a small, lightweight and open box for a raspberry.
you need only distance sleeves
thingiverse
free
Raspberry pi by Ananthu
...raspberry pi by ananthu
thingiverse
raspberry pi
thingiverse
free
Raspberry Arcade
...raspberry arcade
thingiverse
work in progress
this is an arcade machine powered by raspberry. there're many things to do.
thingiverse
free
raspberry support
...raspberry support
thingiverse
support for my raspberry and camera.
i bought a usb led lamp from ikea
thingiverse
free
Raspberry Pi4 Case
...raspberry pi4 case
thingiverse
a minimal case for raspberry pi4.
design based on raspberry pi3 case from adamwdraper
thingiverse
free
RaspBerry Case by jpoilux
...raspberry case by jpoilux
thingiverse
raspberry case with options
thingiverse
free
Raspberry pi B+ tray for Raspberry pi rack by mbh16
... pi tray which the raspberry pi b+ is mounted on. this tray can then slide into the raspberry pi rack which i have also designed.
thingiverse
free
Raspberry stand by Il_sindaco
...d for using a raspberry as controller for your 3d printer. to attack the raspberry to use of small magnets or adhesive velcro .
Pi
thingiverse
free
Pi (for making Pi-cookies) by lemio
... in the shape of the mathematical (and greek) symbol pi. could also be used to decorate your pi-pie with sugar. ideal for pi-day.
thingiverse
free
Raspberry Pi Display Case for Raspberry pi A+
...raspberry pi display case for raspberry pi a+
thingiverse
raspberry pi display case for raspberry pi a+
thingiverse
free
Pied by 303055
...pied by 303055
thingiverse
pied parametric
thingiverse
free
pi by Matthewkaye
...pi by matthewkaye
thingiverse
this is pi: 3.14159265359
thingiverse
free
Rapsberry pi 3 A+ with pi logo
...rapsberry pi 3 a+ with pi logo
thingiverse
i just remixed the case from engin3rd with a raspberry pi logo :)
thingiverse
free
PI Pile or PI Flower? by Jimbotron
... a spiraling pile of pi that i did for fun - and for those who love pi
my daughter pointed out that it also works great as a top.
thingiverse
free
Pi by AwesomeGuy101
...pi by awesomeguy101
thingiverse
it is a pi pie, smart guy.
thingiverse
free
Raspberry Pi and Pi Camera by walle94
...ve a space to put the pi camera. the reason for designed it, was for my thesis, i'm doing a visual system with this component
thingiverse
free
Pieds bureau
...pieds bureau
thingiverse
pieds pour bureau en palette.
thingiverse
free
Peace in Pi by wjt8t
...peace in pi by wjt8t
thingiverse
pi in everything and everything in pi. attempt at sculpturing somnething in pi