RAMPS mount for Anet A8 by SirFarthingtonSmythe

Last crawled date: 3 years, 3 months ago

A bracket for mounting an Arduino RAMPS board to the stock Anet A8 frame. M3-compatible threads are built into the design to eliminate the need for nuts. To use this bracket, you will also need the following screws:
• 1 x 35mm M3 screw
• 2 x 20mm M3 screw
• 3 x 10mm M3 screw
• 4 x 15mm M3 screw
1) Secure Arduino Mega to bracket using three(3) 10mm M3 screws.
2) Secure RAMPS-1.4 shield to Arduino Mega using two(2) 20mm M3 screws.
3) Secure smart adapter LCD/Control connector PCB to RAMPS-1.4 Shield using one(1) 35mm M3 screw.
4) Secure bracket to Anet A8 frame using four(4) 15mm M3 screws.