Radiation Shield for Meteo Stations by Werk_AG

Last crawled date: 3 years, 1 month ago

This is Radiation Shield for Temperature / Humidity sensor, designed for WeatherDuino Weather Stations, but it can also be used for any other kind of DIY Weather Station.
Regarding the original design, the following changes were made:
The plates are now overlapped by a distance of 5mm, this reduces the possibility of rain to get in and cause damage on the sensor.
The size of the plates was increased to 110mm.
The size of the central hole was increased to 40mm to accommodate an optional 40mm fan.
Added a small box on the bottom of the RS, to place electronic parts like the end half of an extended I2C bus circuit
The support of the sensor was redesigned to:
Include an optional connector for the fan.
Allow the use of an additional protection chamber for the sensor

You can find a complete and detailed guide about how to build this Radiation Shield here: https://www.meteocercal.info/forum/Thread-3D-Printed-Radiation-Shield-for-Meteo-Stations