Thingiverse
Radian Pro Servo Tray by clough42
by Thingiverse
Last crawled date: 3 years ago
This servo tray allows you to mount stronger and more precise servos in the ParkZone Radian Pro to improve tail performance. The stock servos do not center well, which is particularly problematic on the elevator, which must be trimmed precisely for the plane to glide consistently.
The tray accepts a Hitec HS-82MG for the elevator and a smaller HS-65MG for the rudder. To mount it in the plane, remove the original servos, test-fit the tray and cut away foam as needed so the tray fits into the bay. The back of the plate rests on the same surface as the tabs of the original (3W) servos. Once you have the tray fitting properly, hot glue it in with a bead of hot glue around the edge.
You may also wish to consider replacing the ESC with one that can provide more current to the servos.
The tray accepts a Hitec HS-82MG for the elevator and a smaller HS-65MG for the rudder. To mount it in the plane, remove the original servos, test-fit the tray and cut away foam as needed so the tray fits into the bay. The back of the plate rests on the same surface as the tabs of the original (3W) servos. Once you have the tray fitting properly, hot glue it in with a bead of hot glue around the edge.
You may also wish to consider replacing the ESC with one that can provide more current to the servos.
Similar models
thingiverse
free
Swap-able Servo Mount by Moarmau5
...hot glue.
included are mounts for both 4g and 9g servos.
simply hot glue these mounts to the foam board, and screw in the servo!
thingiverse
free
Servo Motor Mount SG90
...ount. the motor fits snuggly into the mount. hot glue the outside of mount to the surface you are wanting to install the servo.
thingiverse
free
Freewing 90mm F4 Elevator Servo Tray by Rcfiddy1
...es and 6 top/bottom layers. fit into servo pocket, cutting foam is needed. glue tray in place and screw servo to tray or glue it.
thingiverse
free
9g Tower Pro or Generic Servo Mount Tray Holds Two Side By Side by T_om
... prefer a belt and suspenders approach.
print with no infill and two shell walls. plenty strong and it is best to keep it light.
thingiverse
free
slow poke mini rc plane
...i rc plane
thingiverse
foam board rudder and elevator with elastic bands to hold it on or hot glue ,hot glue for servo and motor
thingiverse
free
Parkzone Radian Pro Camera Mount by Lob0426
...s is a radian pro camera mount. it is hot glued behind the canopy. your camera is held on by rubber bands.
includes sketchup file
grabcad
free
Tetrix Mount for HS-755HB Servo
...tetrix mount for hs-755hb servo
grabcad
fits hs-755hb servo.
compatible with tetrix screws
thingiverse
free
Aeroscout Servo and Battery Tray by TeslaScorpion
...lywood servo & battery tray for my aeroscout so i decided to 3d print my own and use hot glue to put the plane back together.
thingiverse
free
HS-55 Pan System Holder by mfilion
...erything moves nicely. friction fit of the servo is decent, but i added a little wee glob of hot glue to make sure nothing moves.
thingiverse
free
RC Servo Mount, Box & Cover by tfrancis
...th a .35mm tip on my prusa i3 with pla or abs.
i have included my original 123d design files for use if modifications are needed.
Radian
thingiverse
free
Parkzone radian & radian Pro prop adapter by coolzed76
... is to drill the small holes into the print for spinner screws. printed at 60mm/s on wanhao duplicator i3 40% infill and 2 shells
thingiverse
free
Demonstration of Radians by MerganserMoon
... of the radius) match the marked angles on the wheel, up to 2 x pi x radius, thus demonstrating the definition of radian measure.
thingiverse
free
Radian Glider Gopro mount by gosmondson
...radian glider gopro mount by gosmondson
thingiverse
the mount i made to mount a gopro camera ontop of a radian glider.
thingiverse
free
Radian CG Tool Cradles by bmwjoon
...de for a user that wanted a tool for a radian. i think they are 50mm wider and 15mm taller than olev's original f5j cradles.
thingiverse
free
Replacement Cowling for Radian and Radian Pro by thoren
...t motor you have.
the 25mm hole spacing works with the original motor and many others including the turnigy glider drive series.
thingiverse
free
Radian Propeller Spinner and Back Plate by mikej997
...radian propeller spinner and back plate by mikej997
thingiverse
radian glider prop spinner and back plate.
thingiverse
free
Parkzone Radian Pro Camera Mount by Lob0426
...s is a radian pro camera mount. it is hot glued behind the canopy. your camera is held on by rubber bands.
includes sketchup file
thingiverse
free
E-Flight and UMX Radian/Pro Night Radian 2M Wall Hanger by SanguineDrone
...in the picture, use any other plastic for the body and tack them together with glue.
i also have just a normal non-split stl too.
thingiverse
free
FPV Radian XL 2.6 Holder Runcam 2 by cfifly
...fpv radian xl 2.6 holder runcam 2 by cfifly
thingiverse
fpv radian xl 2.6 holder
https://www.youtube.com/watch?v=j4kx_t-5uxg
thingiverse
free
Basic VA1100 camera mount for UMX Radian by Sweetblu
... could mount a va1100 on my umx radian. includes a spot on the back to hold a battery.
added a second version with an open side.
Clough42
thingiverse
free
Clough42 ELS Supporting Files by Greecher
...ygrq-u&ab_channel=clough42
and my implementation is here:https://www.youtube.com/watch?v=fzzz1g9lruo&ab_channel=davegomez
thingiverse
free
Remix of Clough42 Itty Bitty Extruder. by mattshane
...instead of a nema 14. it uses clough42 200mm gt2 loop belt avaiable at their website. http://clough42.com/product/200mm-gt2-belt/
thingiverse
free
Further Modified Clough42 ELS Panel by simon0362
...t panel and allow bolts 3mm x 10 to attach the board from the rear
adjusted pitch of triangular holes to match my button spacings
thingiverse
free
Toolbox Drawer Organizers by clough42
...ow i create them:
https://youtu.be/kjdb__3mcfo
by request, i have also uploaded step and fusion 360 files for most of the models.
thingiverse
free
E-Stop Button Enclosure by clough42
...rews. the holes actually have modeled threads, but most 3d printers will require running a tap through the holes after printing.
thingiverse
free
Hexagon Fan Shrould from Improved Hexagon Cooling by clough42 by Igormatias
...e mouse ear to avoid detachment while printing...
this is the link for the original one:http://www.thingiverse.com/thing:335613
thingiverse
free
Customizable Radius Gauge - Metric by clough42
...o/28wxxx8
when you click on these links and make a purchase, it can result in commissions from amazon that help support my work.
thingiverse
free
Extruder Connector Block by clough42
...etween single and double extruders.
i saved some money on the connectors by printing the hoods. an stl for the hood is included.
thingiverse
free
Precision Matthews PM-1030 Lathe - Clough42 Electronic Lead Screw by dsgroninger
... airplanes. i used nylon washers to prevent the chance of making electrical contact between the screws and any trace on the pcb.
thingiverse
free
Pegboard Spool Holder by clough42
...e a spool holder wide enough for a (makerfarm) 1kg filament spool.
the holder mounts on two long pegboard hooks, 4" apart.
Servo
turbosquid
$30
Servo
...d model servo for download as obj, blend, dae, stl, and sldpr on turbosquid: 3d models for games, architecture, videos. (1394011)
3d_export
$5
servo motor
...tor
3dexport
it's a simple part of servo motor 0.75kw for used in machines assembly to show specified motor in own project.
turbosquid
$1
Servo Moter
...quid
royalty free 3d model servo moter for download as blend on turbosquid: 3d models for games, architecture, videos. (1650816)
turbosquid
free
Motor/Servo
...osquid
royalty free 3d model motor/servo for download as obj on turbosquid: 3d models for games, architecture, videos. (1522522)
turbosquid
$60
Servo Skull
...
royalty free 3d model servo skull for download as ma and fbx on turbosquid: 3d models for games, architecture, videos. (1318573)
3d_export
$5
Servo 3D Model
...rvo 3d model
3dexport
servo
servo 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl pasqualesiciliano 104590 3dexport
turbosquid
$50
Servo Motor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$49
Servo Motor
...model servo motor for download as 3ds, max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1324153)
turbosquid
$29
Servo Set
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
machine servo
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Tray
archibase_planet
free
Tray
...tray
archibase planet
tray salver tea-tray
tray 1 n210312 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tray
...tray
archibase planet
tray salver tea-tray
tray 2 n210312 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$8
tray
...tray
3dexport
design of tray
archibase_planet
free
Tray
...tray
archibase planet
tray salver stand
tray - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tray
...tray
archibase planet
tray salver
tray n050408 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tray
...tray
archibase planet
tray salver kitchen ware
tray - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tray
...tray
archibase planet
tray salver
tray 2 n050408 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tray
...tray
archibase planet
tray salver kitchen ware
tray n241211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Tray
...tray
archibase planet
tray salver office ware
tray n160808 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tray
...tray
archibase planet
donuts donuts tray donut food
tray donuts n190614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Pro
turbosquid
$29
Pro
...ree 3d model mac pro for download as obj, c4d, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1505782)
turbosquid
$15
Apple Mac Pro and Pro Display
...ee 3d model apple mac pro and pro display for download as max on turbosquid: 3d models for games, architecture, videos. (1417078)
3d_export
$5
iphone 13 pro max and pro
...3 pro max and 13 pro the model is made in four colors (graphite, gold, silver, and blue), all of which are attached in the files.
3d_export
free
sapphire pro
...sapphire pro
3dexport
sapphire pro 3d printer head mask
3d_export
$4
macbook pro
...macbook pro
3dexport
macbook pro 13" inch 2020 years model
3ddd
free
GentleLase Pro
... syneron , candela
gentlelase pro аппарат для лазерной эпиляции
turbosquid
$25
PRO frame
...rbosquid
royalty free 3d model pro frame for download as max on turbosquid: 3d models for games, architecture, videos. (1148329)
turbosquid
$5
Alien pro
...osquid
royalty free 3d model alien pro for download as blend on turbosquid: 3d models for games, architecture, videos. (1678446)
turbosquid
$5
iphone11 pro
...uid
royalty free 3d model iphone11 pro for download as blend on turbosquid: 3d models for games, architecture, videos. (1562707)
3ddd
$1
Mac Pro (appel)
...mac pro (appel)
3ddd
компьютер , apple
mac pro