Thingiverse
RackPi with Middle Atlantic Rack by abwreck
by Thingiverse
Last crawled date: 4 years, 5 months ago
While I like the RackPi, it was originally designed for European makers. This remix uses a Middle Atlantic Rack that you can buy from B&H
https://www.bhphotovideo.com/c/product/228478-REG/Middle_Atlantic_FK2_UCP_FK_2_Swinging_Frame.html
And using some M.2 screws you can buy from Amazon for attaching the Pi to the shieldhttps://www.amazon.com/dp/B07D5W1WCP
And some #6 screws to attach these shields to the rackhttps://www.amazon.com/dp/B00F3599ZE
you've got yourself a nice 10-pi rackmount just like in the original Thing.
The changes I made are to
take 1mm off two sides of the shield
move the screwholes out slightly and change their diameter to #6-compatible
I only ported three STLs: those for the Raspberry Pi 4, the Raspberry Pi 3 (which should also work for the 2), and a blank shield.
I had friend print these, so I'm not sure about the printer specs he used.
https://www.bhphotovideo.com/c/product/228478-REG/Middle_Atlantic_FK2_UCP_FK_2_Swinging_Frame.html
And using some M.2 screws you can buy from Amazon for attaching the Pi to the shieldhttps://www.amazon.com/dp/B07D5W1WCP
And some #6 screws to attach these shields to the rackhttps://www.amazon.com/dp/B00F3599ZE
you've got yourself a nice 10-pi rackmount just like in the original Thing.
The changes I made are to
take 1mm off two sides of the shield
move the screwholes out slightly and change their diameter to #6-compatible
I only ported three STLs: those for the Raspberry Pi 4, the Raspberry Pi 3 (which should also work for the 2), and a blank shield.
I had friend print these, so I'm not sure about the printer specs he used.