GrabCAD
Quick plug
by GrabCAD
Last crawled date: 1 year, 11 months ago
Preliminary images of the end cap.
I was inspired from the hydraulic quick connections such as "Serto"
that using a tapered ring with a sharp edge to crimp the ribbon leather.
Inside I used a plastic cap with a threaded metal core to screw the cap outside.
Probably I will have to revise the form of a nylon plug to ensure that under the action of the tool does not slip inside the tube.
Thanks to Tobias Mattsson for ready to employ logo!
Rev: 3-2-12 After the prior images I upload now improved version of the plug and ring
CONCEPT
The concept with whom I developed this plug and the locking ring for handlebar is analogous to the hydraulic joints of rapid connection that contain a conical ferrules tightened by a screw.
I assumed the dimensions in my opinion, but the final size of the ferrule and rings is dependent on the type of leather, by how thick and soft so that the sharp edge of the ferrule can hold it in place.
The other element determinant of the assembly is the cap to be inserted inside the tube;
It must be easily insertable and not rotate due to the action of tightening of the screw.
In the attached photo you can see a plug for sparkling wine, really used for wine quality not excellent, casually sizes are nearly equal to those of the tube.
So we all know that the grip of these plugs can be very effective and that if it were not for the action of the gases of wine would be difficult to remove, or at least it should easily withstand the action of the screw cap. Consider then that the roughness of the pipe is superior to that of the glass of the bottle and also I added one ring more than in cap.
If you want to remove the cap, just insert a M8 screw and pull
For information the wine plugs are for sale on e-Bay for 2 Euro per 100 pieces
MATERIALS
Cap and locking ring in aluminum,
Ferrules in AISI 304 / AISI 431,
Screws in AISI 304,
Heart of the threaded plug, electrolytically galvanized carbon steel,
Plastic plug in Polyethylene
Logo: Aluminum sticker
The paintings of colored bands should be made "saving",
With a CNC center run grooves on aluminium rod, painted the whole thing and then finish the piece by removing the excess material
ASSEMBLY
Insert the plastic plug in the tube, then they must be mounted the inner ring and the ferrules,
Wrap the ribbon of skin on the tube with spiral left, stapling the tape with the ferrules, so that when is screwed the cap which obviously has right hand thread, the tape continues to tighten on the pipe.
Place the ferrule on the inner end of the ribbon and secure with ring having three radial screws 120 ° .
Alignment of the logo.
Mounting with screw can submit the logo not in correct position, but given that the cap has a key of 30 mm, will be easy to take him in position
Place the ferrule on the inner end of the ribbon and secure with three screws fixing the ring to 120 ° radial
I was inspired from the hydraulic quick connections such as "Serto"
that using a tapered ring with a sharp edge to crimp the ribbon leather.
Inside I used a plastic cap with a threaded metal core to screw the cap outside.
Probably I will have to revise the form of a nylon plug to ensure that under the action of the tool does not slip inside the tube.
Thanks to Tobias Mattsson for ready to employ logo!
Rev: 3-2-12 After the prior images I upload now improved version of the plug and ring
CONCEPT
The concept with whom I developed this plug and the locking ring for handlebar is analogous to the hydraulic joints of rapid connection that contain a conical ferrules tightened by a screw.
I assumed the dimensions in my opinion, but the final size of the ferrule and rings is dependent on the type of leather, by how thick and soft so that the sharp edge of the ferrule can hold it in place.
The other element determinant of the assembly is the cap to be inserted inside the tube;
It must be easily insertable and not rotate due to the action of tightening of the screw.
In the attached photo you can see a plug for sparkling wine, really used for wine quality not excellent, casually sizes are nearly equal to those of the tube.
So we all know that the grip of these plugs can be very effective and that if it were not for the action of the gases of wine would be difficult to remove, or at least it should easily withstand the action of the screw cap. Consider then that the roughness of the pipe is superior to that of the glass of the bottle and also I added one ring more than in cap.
If you want to remove the cap, just insert a M8 screw and pull
For information the wine plugs are for sale on e-Bay for 2 Euro per 100 pieces
MATERIALS
Cap and locking ring in aluminum,
Ferrules in AISI 304 / AISI 431,
Screws in AISI 304,
Heart of the threaded plug, electrolytically galvanized carbon steel,
Plastic plug in Polyethylene
Logo: Aluminum sticker
The paintings of colored bands should be made "saving",
With a CNC center run grooves on aluminium rod, painted the whole thing and then finish the piece by removing the excess material
ASSEMBLY
Insert the plastic plug in the tube, then they must be mounted the inner ring and the ferrules,
Wrap the ribbon of skin on the tube with spiral left, stapling the tape with the ferrules, so that when is screwed the cap which obviously has right hand thread, the tape continues to tighten on the pipe.
Place the ferrule on the inner end of the ribbon and secure with ring having three radial screws 120 ° .
Alignment of the logo.
Mounting with screw can submit the logo not in correct position, but given that the cap has a key of 30 mm, will be easy to take him in position
Place the ferrule on the inner end of the ribbon and secure with three screws fixing the ring to 120 ° radial
Similar models
grabcad
free
Quick plug with metallic insert
...quick plug with metallic insert grabcad this solution is similar to my first published, but instead of having a...
grabcad
free
Quick plug V_2
...n aisi 304, while the fixing is obtained with three radial screws.
valid, however, the other consideration expressed in version 1
thingiverse
free
Drip Distribution Tubing Cap by ruminant1
...cing the cap in as far as it will go. i generally spread some super glue on the inner plug end to make sure it's waterproof.
thingiverse
free
Screw hider / end cap for a 15mm diameter hole by ChrCphDk
...r of the inner circle is actually 16mm, in order to put pressure on the plastic when inserted into the hole, to hold it in place.
grabcad
free
Round Cap Plug Plastic Tube End Cap FOR 1.250" (1-1/4") TUBES
...ube end cap for 1.250" (1-1/4") tubes
grabcad
round tubing plug for 1.250" (1-1/4") tubes ldpe black plastic
thingiverse
free
Cane Topper by Zackvandever
...the topper into the threaded insert. the interior of the topper is designed to hold the head of the bolt in place as you tighten.
thingiverse
free
End caps for tubes (Snap In Rectangular Cap Plugs) by hellc2
...r abs.
this model size is for tubes with 40x20mm and 60x32mm but i attach the original models if you need modify for other sizes.
thingiverse
free
Filament filter for 4mm PTFE tube by Zoli4911
... 4mmptfe tube can be inserted at the end, and the bottom of the filter can be inserted into the push to release ptfe tube holder.
thingiverse
free
Wine Bottle Screw Cap by N3utrin0
...t;chamfers" so there will be some sharp edges. the basic version is best if you want to make some edits to the freecad file.
thingiverse
free
End cap / Foot for 19mm Square Tubing with 16mm inside measure by arnoldbosch
...m inside measure by arnoldbosch
thingiverse
end cap for square tubing with 19mm (3/4") outer measure and 16mm inner measure
Plug
3d_export
$5
plug
...plug
3dexport
3d_export
$5
plug cover
...plug cover
3dexport
plug cover
3d_export
$5
spark plug
...spark plug
3dexport
spark plug
3d_export
free
spark plug
...spark plug
3dexport
spark plug
turbosquid
$30
plug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
plug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Plug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Plug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Plug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
plug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Quick
3ddd
$1
Quick-Step / Quadra
...quick-step / quadra
3ddd
quick step
ламинат quick-step, серия quadra. сайт источник -http://www.quick-step.com
3ddd
$1
Quick-Step / Lagune
...quick-step / lagune
3ddd
quick step
ламинат quick-step, серия lagune. сайт источник -http://www.quick-step.com
3ddd
$1
Quick-Step / Classic
...quick-step / classic
3ddd
quick step
ламинат quick-step, серия classic. сайт источник -http://www.quick-step.com
3ddd
$1
Quick-Step / Arte
...quick-step / arte
3ddd
quick step
ламинат quick-step, серия arte. сайт источник -http://www.quick-step.com
3ddd
$1
Quick-Step / Vogue
...quick-step / vogue
3ddd
quick step
ламинат quick-step, серия vogue. сайт источник -http://www.quick-step.com
3ddd
$1
Quick-Step / Rustic
...quick-step / rustic
3ddd
quick step
ламинат quick-step, серия rustic. сайт источник -http://www.quick-step.com
3ddd
$1
Quick-Step / Eligna
...quick-step / eligna
3ddd
quick step
ламинат quick-step, серия eligna. сайт источник -http://www.quick-step.com
turbosquid
$3
Quick Ball
...lty free 3d model quick ball for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1521597)
3ddd
free
Quick-Step / Elite
... ламинат
ламинат quick-step, серия elite. сайт источник -http://www.quick-step.com
turbosquid
$10
Quick Chrome
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.