Thingiverse
Quick access tool holder for Taz by inkjetsux
by Thingiverse
Last crawled date: 3 years ago
I like having my most used tools quickly accessible, and not taking up table space.
This mounts in the upper-right corner of your Taz, squeezing securely into the channels of the frame. The extra bit in the corner fits inside the Taz's triangle bracket, and keeps the whole thing from falling out.
Most of the tools don't vibrate while the printer is operating, but the scraper tool does, so I added the little spring finger to its slot to keep it still.
WARNING: if you print very tall parts (~>140mm), some allen keys or scrapers might hit the Z-carriage as it comes up during the print.
This mounts in the upper-right corner of your Taz, squeezing securely into the channels of the frame. The extra bit in the corner fits inside the Taz's triangle bracket, and keeps the whole thing from falling out.
Most of the tools don't vibrate while the printer is operating, but the scraper tool does, so I added the little spring finger to its slot to keep it still.
WARNING: if you print very tall parts (~>140mm), some allen keys or scrapers might hit the Z-carriage as it comes up during the print.
Similar models
thingiverse
free
FlashForge Creator Pro - Tool Tray (rounded corners) by TTB_Studios
...ded a peg for hanging my scraper.
thanks to basnettd1 for the original upload in which my design/remix is based.
happy printing!
thingiverse
free
UP Board Mount for Lulzbot TAZ by rwinscot
...windows 10 with simplify3d... a great trio to keep track of your prints!
i also have a logitech webcam, which i use to broadcast.
thingiverse
free
Ender 3 Tool Holder (Without Scraper Slot & w/ Tool Peg) by benwebb1995
...gantry collides with a tool on the tool peg when moving up, bare this in mind if you print this or print the one without the peg.
thingiverse
free
Ender 3 pro glue stick and scraper holder by Wormy82
...ck and scraper holder which slides into the top horizontal bar, no tools required. easy access to the two most used printer tools
thingiverse
free
Scraper Holder Ender 3 by Toonies
... by toonies
thingiverse
this is my first creation. i have print tool stand for my ender 3 but i can't use it for my scraper.
thingiverse
free
PRINT BED SCRAPER / REMOVAL TOOL by UKCD
...print bed scraper / removal tool by ukcd
thingiverse
a quick print bed scraper or print removal tool.
thingiverse
free
Ender 3 V2 - Slim tools by C-son
...esign, which suits the design on the ender 3 v2 printer very well.
thanks for downloading, i hope it would be useful to you too.
thingiverse
free
print Removal Tool/Utility blade scraper by skydog538
...e edge razor blade; i haven't tried that.
also includes a sheath for the blade so you don't cut yourself up (like i did!)
thingiverse
free
The Scraper by 170_Makes
... a surface. i printed the one shown above over half a year ago and although one of the corners are dented, it's held up well.
thingiverse
free
Ender 3 v2 Tool Holder plus Knife and Tweezers by markgsc
...s isn't an issue for me, and the convenience of placement outweighs the once in a never that i would print a 250mm tall item.
Inkjetsux
thingiverse
free
Insulin vial protector by inkjetsux
...or storing insulin in the refrigerator or throwing in my backpack for travel. the top slides on nicely, but there is no locking.
thingiverse
free
Rotation knob extender for Lulzbot Taz by inkjetsux
...the piece does not line up with the front of the knob so that you can still easily push the button without hitting/dislodging it.
thingiverse
free
Simple spool mount for Taz by inkjetsux
... little more, and the bumps on the top keep the spools in the center.
i recommend abs for this, as pla might deflect over time?
thingiverse
free
Sample Filament Spool by Scotty-G
...here is my spool suspended above my taz using inkjetsux#39;s simple spool mount for tazhttp://www.thingiverse.com/thing:753692 this accommodates both 3mm...
Taz
thingiverse
free
TAZ by Taz8373
...taz by taz8373
thingiverse
my 1st print
thingiverse
free
Taz Wiper Mount by theFPVgeek
...taz wiper mount by thefpvgeek
thingiverse
lulzbot taz wiper mount
thingiverse
free
Lulzbot Taz Enclosure by MrMcGuire
...lulzbot taz enclosure by mrmcguire
thingiverse
parts for an enclosure for lulzbot taz
thingiverse
free
TAZ by farenthys
...ant taz. need some improvements.
i add .blend file.
new file for some test print
try to cut into 4 part: corpse,leg , arm, teeth
thingiverse
free
Taz by SculptandPrint
...tasmanie est un personnage des looney tunes de la warner bros. pictures. c'est un diable de tasmanie.
sculpt -> zbrushcore
thingiverse
free
Taz Bracelet by blodin
...taz bracelet by blodin
thingiverse
bracelet
thingiverse
free
Looney Tunes TAZ by riccardo3D
...looney tunes taz by riccardo3d
thingiverse
taz from looney tunes hand painted foxsmart brown pla.
thingiverse
free
XLBot - Clone of Taz by Neoprodfx
...xlbot - clone of taz by neoprodfx
thingiverse
my version of taz 4.0, with modifications and new pieces.
z nut is for m8.
thingiverse
free
TAZ LED mount by TickleMancer
...taz led mount by ticklemancer
thingiverse
for my lulzbot taz 3, to better see what's happening.
thingiverse
free
TAZ Wire Clip by jakubk
...the clips should snap into the extruded aluminum channel with some force.
printed using 3mm pla with a 0.5mm nozzle on a taz 5.
Access
thingiverse
free
Access covers
... designed these snap covers to be epoxied onto aircraft fabric. the allow access to bolts or other such things under the fabric.
thingiverse
free
Access Card Holder
...access card holder
thingiverse
just an access card holder.
thingiverse
free
Bottom Part with microsd access
...part with microsd access
thingiverse
in the original design there is no access to rpi microsd slot.
it's just an extra hole.
thingiverse
free
Access Door by JunkBox
...low periodic maintenance. i know i have seen these in the past, but when i needed one i couldn't find it. so i made my own.
thingiverse
free
Easy access box by Crossfire_X
...easy access box by crossfire_x
thingiverse
an easy access box for change, guitar picks, key's...
made in 123d design.
thingiverse
free
WiFi Access Point Mount by jasehansen
...en
thingiverse
a wifi access point mount made to remount a linksys ceiling mounted access point after losing the original mount.
thingiverse
free
USB access panel for FCU by Ace01
...usb access panel for fcu by ace01
thingiverse
usb access panel for flight controller
thingiverse
free
Accessible Spoon by lucaga37
...o can't move hand properly.
i hope that it will help some of you and i'm really open to your feedbacks.
thanks
luca gallo
thingiverse
free
Accessible Spoon by lucaga37
...o can't move hand properly.
i hope that it will help some of you and i'm really open to your feedbacks.
thanks
luca gallo
thingiverse
free
Access card holder by relet
....
printed on a tom, the card sticks quite nicely in the frame, and cannot fall out. raftless printing makes for a smooth surface.
Quick
thingiverse
free
Quick Square
...quick square
thingiverse
3d printable quick square or carpenter's triangle designed using freecad.
thingiverse
free
quick set by niltomsh
...quick set by niltomsh
thingiverse
camera quick set
thingiverse
free
Quick Clip for Maxpedition
...quick clip for maxpedition
thingiverse
a quick clip for the maxpedition. could work for other quick clips, sized at 7mm x 18mm
thingiverse
free
Quick Testpart by Chri
...quick testpart by chri
thingiverse
quick testpart for printer calibration
thingiverse
free
Quick Legs by lorensan
...quick legs by lorensan
thingiverse
make your self a quick table
thingiverse
free
40mm Quick Clamp, Rohrschelle, Quick Schelle by Sicariuss
...40mm quick clamp, rohrschelle, quick schelle by sicariuss
thingiverse
havend printed yet .will update soon !
thingiverse
free
Quick Connect Cap
...quick connect cap
thingiverse
garden hose cap - quick connect version.
this is not a water tight design.
thingiverse
free
quick pick
...ylene hose to an oxygen reducer has threads g13.157x1.377 and m16x1.5
tested at a pressure of 15 bar, no gas leaks were detected.
thingiverse
free
Quick Nut by LeftAngle
...quick nut by leftangle
thingiverse
a very quick print of a nut that fits quite a few different sized bolts.
thingiverse
free
Quick release adapter
...ps://it.aliexpress.com/item/32871626450.html
12mm flange: https://it.aliexpress.com/item/32900597116.html
print with 100% infill.
Tool
thingiverse
free
Tool holder tool box
...tool holder tool box
thingiverse
!
thingiverse
free
Teng Tools tool set hinge
...teng tools tool set hinge
thingiverse
hinge for teng tools tool set.
thingiverse
free
Tool holder for 8mm lathe tools
... holder for 8mm lathe tools
thingiverse
tool holder for 8mm lathe tools.
there is 11 slots because i have 11 tools in my pack :)
thingiverse
free
Tool Holder for Small Tools by Darak_Chen
...tool holder for small tools by darak_chen
thingiverse
a little tool holder witch fits on you desk for small tools!
thingiverse
free
Tool Holder For various Tools by Nhcraig01
...tools by nhcraig01
thingiverse
this is just a simple tool holder for various tools i found useful for tinkering on a 3d printer.
thingiverse
free
Tool Box Tool Holder by FPVITALL
...tool box tool holder by fpvitall
thingiverse
a simple and spacesafing tool stand or desktop organizer
thingiverse
free
tools by kallik
...tools by kallik
thingiverse
tools
thingiverse
free
TOOLS by kallik
...tools by kallik
thingiverse
tools
thingiverse
free
TOOLS by kallik
...tools by kallik
thingiverse
tools
thingiverse
free
Tool by nagato
...tool by nagato
thingiverse
tool
Holder
thingiverse
free
Stubby holder holder
...der
thingiverse
bottom on the holder is sized for a can or bottle. top of the holder is sized for one in a cooler/stubby holder.
thingiverse
free
Soap holder holder
...soap holder holder
thingiverse
it's a holder to hold the famous soap holder.
thingiverse
free
bottle holder Jar holder can holder
...bottle holder jar holder can holder
thingiverse
hole diameter 38.6mm
thingiverse
free
Spool holder holder by vemotion
...spool holder holder by vemotion
thingiverse
pipe holder (16mm diameter)
thingiverse
free
smartphone holder with usb cable holder and key holder
...other of invention
this is my first creation basically smartphone holder with usb cable holder and key holder
i hope you like it
thingiverse
free
Holder of plate holders by budvar
...t; ;) holder for 5 pieces of modular plate holders from dave o https://www.prusaprinters.org/en/prints/15367-modular-plate-holder
thingiverse
free
Pen Holder/card holder by Pinky561
...pen holder/card holder by pinky561
thingiverse
a pen holder/card holder in one.
thingiverse
free
Toilet paper holder with phone holder
...toilet paper holder with phone holder
thingiverse
toilet paper holder with phone holder
thingiverse
free
Radio equipment holder and microphone holder
...radio equipment holder and microphone holder
thingiverse
radio equipment holder and microphone holder
thingiverse
free
Popsicle Holder Holder by billiamthesecond
...popsicle holder holder by billiamthesecond
thingiverse
keep popsicle holders upright so that they can be set down