Qidi tech 1 adjustable glass bed clips / clamps / brackets 4mm glass by Stealth_NT

Last crawled date: 3 years, 1 month ago

I dont like the stickers surfaces mainly because im use to be able to remove the bed to do my stuff, I hate cleaning that stickers and sometimes they are not even flat.
On this printer a clip or bracket that is high than the glass or mirror can be a problem the nozzle can drag on the bracket specially on the back right side.
That can be fix with DrLex since its customizable but its for a flashforge, also I like to print stuff and use it, so go a find hardware aka screws etc was not a good idea for me.
This can be printed and used it with the printer screws and nuts there is nothing else necessary for make it work.
ABS its mandatory due the high temp of the bed, tested on long prints ( 18 hrs or more) no issues.
This was moded to hold a 4mm glass or mirror what as I understand its a common size, I just went buy a piece of glass and cut it my self same size as the bed (I suck cutting glass) I guess will works for other sizes, I will know when the borosilicate surface arrives.
UPDATE 21-10-2018:
Version 2
The brackets or clamps was adjusted to be able to hold a borosilicate glass (finally arrive, 3mm) V2 now can hold 3-4mm wide glass with the same bracket.
Screws was moded for better hold and be more friendly with the nuts, the hole for the screw is that thigh on propose, just force the way of the metal screw.
The brackets can be print at the max speed your printer can handle it, the screws its recommended to be printed at lower speed, for me was 80% of my max speed.
Z high can be "adjusted" with this just make it at the same wide of your crystal. Im using a glass of 4mm at the moment so this was printed at 4mm wide (that can be adjusted on your slicer) be sure the rod size are the ones you have, mines are 10mm far as I know there is 2 versions.
In the pictures are the borosilicate 3mm glass and the 4mm mirror installed with the same clamps/brakets.
http://www.thingiverse.com/thing:1697935