PWM Motor Speed Controller Housing with optional Bullet Feeder mount by Pyrex238

Last crawled date: 3 years, 1 month ago

This is a PWM motor speed controller housing designed around a popular 12/24V DC speed controller. This is designed to house the the "SMAKN CCM6C 6V 12V 24V DC Speed Controller PWM Module 10A" currently sold on Amazon, but it is sold under multiple names. This also utilizes a common 12.7mm (1/2") on/off switch, as well as a common LED/12v power terminal. The housing also mounts the potentiometer from the PWM controller.
Modifications for install:
To install this I de-soldered and removed the terminal block on the PWM controller. This isn't 100% necessary, but it would be a tight fit without it, you will need to break off the closest ear to the switch if you don't. Also, I shortened the wires to the pot to make additional room. It should be self explanatory from the photo. There is also a base included to mount to Ammo Mike's bullet feeder (if that's your purpose). There is a port on the back of the housing to run wires out to the motor.