Thingiverse
PVC Spool Rack by doguri
by Thingiverse
Last crawled date: 3 years, 1 month ago
Shelf that rests on the leg support of a Seville Classics UltraHD workbench.
Version 1: (Green in Photos)
Consists of two main supports, two 3/4 inch PVC pipe and 4 end caps.
The base slot on the support is 50mm wide and sits loosely on the leg support.
The pipe fittings are snug. Only the end caps were glued.
Version 2: (Blue in Photos.)
Supports are stackable.
The second beam is made from two printed brackets and two 1"x2" boards cut to 18 inches. The two boards are attached to the bracket using 1.25 in wood screws.
The beam support are two 1"x2" boards cut to 8.5 inches. The supports are attached to brackets and supports with 1in wood screws.
Version 1: (Green in Photos)
Consists of two main supports, two 3/4 inch PVC pipe and 4 end caps.
The base slot on the support is 50mm wide and sits loosely on the leg support.
The pipe fittings are snug. Only the end caps were glued.
Version 2: (Blue in Photos.)
Supports are stackable.
The second beam is made from two printed brackets and two 1"x2" boards cut to 18 inches. The two boards are attached to the bracket using 1.25 in wood screws.
The beam support are two 1"x2" boards cut to 8.5 inches. The supports are attached to brackets and supports with 1in wood screws.
Similar models
thingiverse
free
4 inch end cap for PVC pipe by valarok
...4 inch end cap for pvc pipe by valarok
thingiverse
simple end cap for a 4 inch pvc pipe with small holder
thingiverse
free
Thread end cap 1-1/4 inch by Ivan_Mityunov
...thread end cap 1-1/4 inch by ivan_mityunov
thingiverse
simple end cap for pvc thread pipe 1-1/4 inch
thingiverse
free
PL259 PVC End Cap by WillyMakit
...quot; long. this fits nicely on 1 1/4" schedule 40 pvc pipe, and you can use regular pvc glue to attach it to the pvc pipe.
thingiverse
free
Peg Board Filament Rack Bracket by Fr8Dog
... so i do not recommend storage racks of greater than 4 spools.
these brackets were printed in pla with support for the end pegs.
thingiverse
free
PVC Custom Wire Spools by Look
...'re snap fit so no fasteners needed!
you can drill and screw into the flange or glue it if you want it to be more permanent.
thingiverse
free
1 inch PVC wall bracket by wuthehun
...rackets, mounted them to some shelf supports above my 3d printer, and put a length of pvc between them to hold my filament spool.
thingiverse
free
1.5 inch Schedule 40 End Cap by dhulihan
...ool hole is slightly bigger than an piece of 1.5" pipe, so two end caps can turn a piece of pipe into an nifty spool holder.
thingiverse
free
1.25 PVC Schedule 40 Pipe Mount by BobBungalow
...25 pvc schedule 40 pipe mount by bobbungalow
thingiverse
for mounting 1.25" (1 1/4 inch) schedule 40 pvc pipe via 4 screws.
thingiverse
free
Lorei spool holder by tuxcat
...le to fit to the bottom of the base
2 - 4" x 1/2" pvc
1 - 1/2" tee pvc
1 - printed rev 6 base
2 - printed end caps
thingiverse
free
2 inch end cap by valarok
...2 inch end cap by valarok
thingiverse
2 inch end cap for pvc pipe
Doguri
thingiverse
free
Cable Manager Panel Clip by doguri
...cable manager panel clip by doguri
thingiverse
replacement clip for a cover panel of a cable manager.
thingiverse
free
Wacom Pen Button by doguri
...wacom pen button by doguri
thingiverse
replacement wacom pen button. modeled from pen used for cintiq 21ux or intuos 3 tablet.
thingiverse
free
Threaded Beer Tap Handle by doguri
...threaded beer tap handle by doguri
thingiverse
added threads to "beer tap handle by mschrock".
thingiverse
free
Beer Tap Handle by doguri
...ap handle. 3/8 in threads are already part of the model. (threads created using "openscan iso metric thread library")
thingiverse
free
Wacom Button Cover by doguri
... the tablet can be blocked by the tablet drive.) the pth660 is the newer style that is thinner with no gaps between the buttons.
thingiverse
free
Under Desk Bracket by doguri
...ed screw. there is also an option to connect a 120 mm panel wing, which was the depth of the kvm it was originally designed for.
thingiverse
free
TP Holder Side by doguri
...slicing with slicer seemed to have an issue, since model was duplicated on top of itself. (cura was not affected by this issue.)
thingiverse
free
Ceiling Hook by doguri
...n mind how much weight is being placed on the grid support.
used screw and threads from:https://www.thingiverse.com/thing:1686322
thingiverse
free
Hook for HP Officejet 4500 Tray by doguri
... officejet 4500 printer paper tray. created replacement hook that fits into the groves of the original hook that had broken off.
thingiverse
free
SGI Indigo2 Foot Stand by doguri
...an the original. i've also made it lower to save on material. this is the low profile file and is the one that is pictured.
Pvc
thingiverse
free
PVC Plug by joewest12
...pvc plug by joewest12
thingiverse
fits into pvc junction and into pvc
thingiverse
free
PVC pipe fitting for 18mm pvc pipe
... 19mm. i tested the it and it fits perfectly.
this is a custom made pvc fitting designed for my 18mm pvc pipes (outside diameter)
thingiverse
free
PVC Fittings
... used to connect pvc pipe for projects such as 3d printer enclosures. i added a slotted tee that will accept glass or plexiglass.
thingiverse
free
PVC Reducing by thanaphan
...pvc reducing by thanaphan
thingiverse
pvc pipe reducing
thingiverse
free
PVC Holder by mrobbins
...pvc holder by mrobbins
thingiverse
to hold 3/4" pvc
thingiverse
free
PVC Pipe by elisabethjenny
...pvc pipe by elisabethjenny
thingiverse
two way pvc pipe segment
thingiverse
free
PVC joint corner
...pvc joint corner
thingiverse
designed for pvc enclosure for my ender 5 plus
thingiverse
free
PVC Junction by joewest12
...pvc junction by joewest12
thingiverse
this is a junction to create a base for a tiki torch by using pvc as the legs
thingiverse
free
PVC SPOOL HOLDER by ManuMaker
...pvc spool holder by manumaker
thingiverse
pvc spool holder
thingiverse
free
PVC Wall Mount by WillyMakit
...s small wood screws (like drywall screws), and 1/2" schedule 40 pvc. this can be attached to the pvc with regular pvc glue.
Rack
thingiverse
free
Rack
...rack
thingiverse
a rack
thingiverse
free
OPEN Rack - Blank Rack by Boulon
...open rack - blank rack by boulon
thingiverse
blank rack for open rack 1 to 7 units
thingiverse
free
kitchen Rack
...kitchen rack
thingiverse
kitchen rack
thingiverse
free
Rack by modestos93
...rack by modestos93
thingiverse
this is a rack and pinion
thingiverse
free
Material rack
...material rack
thingiverse
material rack
thingiverse
free
Weapon Rack
...weapon rack
thingiverse
a little weapon rack
thingiverse
free
Drying Rack
...drying rack
thingiverse
resin print drying rack
thingiverse
free
rack attachment by paulrice_
...rack attachment by paulrice_
thingiverse
roof rack atttachment for surg rack
thingiverse
free
File Rack
...file rack
thingiverse
this is a small rack for storing a set of files purchased from walmart
thingiverse
free
Rack
...rack
thingiverse
watch zombieland double tap online
Spool
thingiverse
free
Spool Support For Anycubic Spool Holder and AMZ3D Spools by Kobaratsu
... amz3d spools by kobaratsu
thingiverse
spool axis support to avoid jerks on spool, using anycubic spool holder and amz3d spools
thingiverse
free
Spool adapter for Warhorse spool
...spool adapter for warhorse spool
thingiverse
a simple spool adapter to use abs warhorse spool with a 72 mm hole diameter.
thingiverse
free
Spool holder for 1KG Spools by angkor
...spool holder for 1kg spools by angkor
thingiverse
spool holder for 1kg spools
thingiverse
free
Spool holder
...spool holder
thingiverse
i use this spool holder for up to 1kg spools and should fit all spools.
thingiverse
free
Spool assembler
... empty spool with this spool assembler
just cut an empty spool in half , put your filament and assemble with this spool assembler
thingiverse
free
Small Spool and Spool Stand by Beckman13
...ool holder are meant for 50 gram flexible filaments. the two sides of the spool holder are meant to slide together and interlock.
thingiverse
free
spool spindle cap for 25mm spools by Seadevil
...spool spindle cap for 25mm spools by seadevil
thingiverse
spool spindle cap for 25mm spools
thingiverse
free
spool ! by St0rmingBr4in
...spool ! by st0rmingbr4in
thingiverse
this is a spool !
thingiverse
free
Spool Holder for large spools by dmonkey
...y
thingiverse
a spool holder that you can attach to the back of a makerbot replicator that can hold large filament spools (1kg)
thingiverse
free
Spool roll
...spool roll
thingiverse
spool roll