Thingiverse
PushUpAndSlide by Dnard
by Thingiverse
Last crawled date: 3 years ago
Pushup bar that also can be used to slide (slide one side out and back at a time), ensure you wash off the glue (use furniture polish to make it even more slippery). Used a .8 nozzle, 230 nozzle temp, 60 bed temp, triangles, skirt, .2 layer height, .2 initial layer height. I think the nozzle temp is too high, infill shows through. Or the other thing to try is lowering the infill overlap (defaults to size of nozzle). This took 7 hours and 9 minutes to print.
Similar models
thingiverse
free
BBYoda
...bbyoda
thingiverse
11:28 hour print.
.2 layer height
90% infill
24mm speed
210 nozzle temp
60 bed temp
thingiverse
free
2" NPT Plug by FreinK
...2" npt plug by freink
thingiverse
petg amazon basic
nozzle 0.6
layer: 0.25
infill: 25
speed 55mm
nozzle temps: 240
bed: 80
thingiverse
free
Temp tower for labelling by Mysophobe
...an be used with 0.1 and 0.2 nozzles also.
...06noz_03layer.stl = 0.6 nozzle & 0.3 layer. can be use with 0.1 and 0.3 nozzles.
thingiverse
free
Pubg Keychain by aasish
...la filament. 3d printer settings for this object:
nozzle temp: 210c
bed temp: 75c
infill:30
layer height: 0.2
print speed: 50mm/s
thingiverse
free
Nema Kysan Support by chris77uk
...olid layers: top 5 and bottom 3, infill 33.505%, fill angle 50 degree, temp: first layer 211 and other layers 206 degree celsius.
thingiverse
free
TRex Shower Head: Different Densities for Nozzle and Skull by BasmentShop
...etier host and octoprint.
i documented my slicing at the s3d forum:http://www.forum.simplify3d.com/viewtopic.php?f=8&t=2071
thingiverse
free
belt mask holder by tyricehammer
...belt mask holder by tyricehammer
thingiverse
.4mm nozzle ----- .12-.2 mm layer height , infill 20 -60 %
thingiverse
free
towing hook shaka by champey
...atient)
2 layer wall
20% infill
pla 1.75
pauze at layer height 195 & standby temp 200degrees
i've put in the project file
thingiverse
free
Order of the Arrow Neckerchief Slide
...print speed 40mm/s
minimum layer time 30 seconds
it was my first attempt at creating a neckerchief slide from remixed components.
thingiverse
free
Cat Flipping Off Phone Stand by djinnsour
...esion : skirt
dimensions : about 180mm tall, 3mm thick, 80mm wide (sized for pizel 4a xl)
print time : 4 hours front, 1 hour base
Dnard
thingiverse
free
Back Scratcher by Dnard
...back scratcher by dnard
thingiverse
printed .4mm nozzle, .2 height, attach to 3/8 wood dowel
thingiverse
free
Laptop Lift by Dnard
...by dnard
thingiverse
this stand has four different height adjustments by rotating the rectangle. current size fits up to 10.6mm
thingiverse
free
Lid Side Latch Large by Dnard
...lid side latch large by dnard
thingiverse
large latch for sterilite container
thingiverse
free
HookRailing by Dnard
... to 1.75 inch railing. pictured is 1.25 inch railing. the pot pictured is 10 inch. i printed this with a .8mm nozzle, 6 hours.
thingiverse
free
Feed Ball by Dnard
...://www.thingiverse.com/thing:2650524 i needed something a little bigger for my dog and without the need to superglue it together.
thingiverse
free
Head Phone Holder by Dnard
...d phone holder by dnard
thingiverse
used on a raised edge, like a drawer or end table with edge. 20%in fill, cura, used support
thingiverse
free
Lid Side Latch by Dnard
...iverse
broken handle on storage container needed replacing. fits better than the original. this sterilite lid is 350mm x 190mm
thingiverse
free
Shower Curtain Ring Clip by Dnard
...tain ring clip by dnard
thingiverse
made the edges round (the square edge kept catching) and clip version for easier on and off.
thingiverse
free
Weight Plate Handle by Dnard
...ercises such as warm up curls, rear delt raises, and lateral raises. in the pictures i've attached it to a 5lb weight plate.