Pump housing for R/C fuel station by Igb 3d model
3dmdb logo
Thingiverse
Pump housing for R/C fuel station by Igb

Pump housing for R/C fuel station by Igb

by Thingiverse
Last crawled date: 3 years ago
This is a simple housing for the battery, switch and fuel pump, in order to have all of this directly mounted on the fuel can.
This was customized for a greylor pump (probably the best pump for hobby fuel and kerosene, also quite expensive) and a fuel can I purchased for this (exact model: Arnold 6011-X1-2001). In this particular model it can be fitted with 2 M3x10 screws and 2 M3 nuts. It should fit other similar shaped cans with minor modifications.
This part is designed to have a big 3 position switch (in order to switch the direction of the pump), and one XT-60 male connector in order to use standard hobby 3S LiPo batteries. It also nicely fits 3x18650 if they are shaped like a triangle.

Tags