PSVR Aim Controller Mounting Clips by nickulo

Last crawled date: 3 years, 1 month ago

These mounting clips are designed for the Playstation VR Aim Controller.
I made them so that I could mount my Aim Controller under a cabinet surface where it would be hidden from plain view when stored and accessed when booting up my Playstation and plugging in my PSVR headset. It is also positioned to be easily charged using the PS4 USB port.
It is designed to be used with medium 3M Command Strips.
The clips shown in the pictures, and the ones I am using, are .085" thick. I have also provided .100" thick files in case you need more stiffness. Mine are made from ABSPlus and seem to hold the controller sufficiently.
The idea is to hold the controller toward the bottom portion, put the top cross member up against the top of your cabinet (or coffee table, etc), slide that into the back horizontal clips, and then swing the bottom part of the controller up into the vertical clip(s). In the picture I am using the first version of the vertical clip I designed. It works sufficiently but you have to pull the controller toward you just a bit for it to slide in. I attempted to correct this in the rev A version but I have not tested it as I don't have easy access to a 3D printer.
Description of parts:
clip_085_horiz - Horizontal clips used at the back. 0.085" Thick.
clip_085_vert - Vertical clip used at the front. 0.085" Thick.

clip_085_vert_A - Vertical clip rev A attempting to correct the above described design flaw. 0.085" Thick.

clip_100_horiz - Horizontal clips used at the back. 0.100" Thick.
clip_100_vert - Vertical clip used at the front. 0.100" Thick.
clip_100_vert_A - Vertical clip rev A attempting to correct the above described design flaw. 0.100" Thick.
Obviously these can be used in any configuration and combination you like. All vertical or all horizontal clips is an option.
Models are in inches.