PS4 VR HDMI Cable Connectors Protection Box with PS logo by Milogom

Last crawled date: 3 years ago

I designed this box in order to protect my PS4 VR HDMI cables and connectors to be bent or broken. This the quick release version. I'll also upload a knot/screw version soon.
My recommendation is to use 5 to 10% infill material, 2 perimeters (printed with 0.2mm nozzle diameter), 0,1mm layer heigh. For low diameters as 0,3 or 0,2mm, it's good to not exceed 0,30mm/s printing speed, so you could also lower the temp a little bit, arround 180ºC (I used 177 so no problems with unsupported zones, bridging, logo, etc. WARNING: Low temperatures could damage your printer, know your printer and materials first). Use support material just from base, for the single cable holder, no need to print support for staples (higher layers). Retraction just to your liking, you can even cut any undesired rest of filament threads, as outside perimeters will not be affected.