Thingiverse
Prusa i3 x-belt tensionner upgrade by ffleurey
by Thingiverse
Last crawled date: 3 years ago
The Prusa i3 is really a great design. The only thing I have problem with is the way the x belt is tensioned. Since the x smooth rods are not clamped in the x end, the belt tension is actually on the z smooth rods. I probably have some low quality smooth rods but for me it tends to bend the z smooth rods so I cannot put much tension on the belt. The ugly x-end you see on the picture is the result of this lack of tension on the x belt.
This part is a quick and dirty upgrade which reuses all the original part and just adds a plate to put the load on the x axis smooth rods instead of loading the z axis.
It uses 2 M6 bolts and nuts. The M4 nut in the middle is the original one from the Prusa i3 idler holder. The bolt holding the idler holder in the x end is removed.
This part is a quick and dirty upgrade which reuses all the original part and just adds a plate to put the load on the x axis smooth rods instead of loading the z axis.
It uses 2 M6 bolts and nuts. The M4 nut in the middle is the original one from the Prusa i3 idler holder. The bolt holding the idler holder in the x end is removed.
Similar models
thingiverse
free
Prusa i3 Mk2 X Axis Tensioner by filament_junkie
...20mm) to allow for belt tension adjustment.
it puts tension on the end of the x axis rods so not to bend the z axis smooth rods.
thingiverse
free
Prusa i3 MK2 X-Idler Tensioner by Jasenk
... kit came with extras that i used.
the pully slide (x-end-idler-front-tensioner) fits one way. if it's tight flip it around.
thingiverse
free
Prusa I3 X-END-IDLER-MODIFIED with X-END-IDLER-TENSIONER by danroh
...ng, two m3x14mm nuts and two m3 bolts
the working area of the tensioner is about 5-6mm, it should be enough to tighten the belt
thingiverse
free
Prusa i3 x end idler with belt tightener by liusega
...nd idler with belt tightener by liusega
thingiverse
modified x end idler with belt tightener
for increase tension of x axis belt
thingiverse
free
X Idler with Z Anti-backlash Spring and Belt Tensioner by 7effrey
...commend the alternative version for longer rods if they are 370 mm - my rods fits perfectly well with the old prusa mk2 x-idler.
thingiverse
free
Prusa i3 Leadscrew Z axis upgrade with Endcap - Remix by Streacks1
... it is a simple integrated endcap. i wanted to take tension off of the z axis rods.
this is a remix of a part designed by eried.
thingiverse
free
Prusa i3 MK2 X Idler/Belt Tensioner+ v2 by IsmaelPR1
...and through the idler and secure with the tensioner round screw that will have the nut placed inside of it in the space provided.
thingiverse
free
X-Axis Idler End with M10 Threads by ctchunter1
...
thing # 1118272 for the x-axis idler tensioner. this needs to be in nylon for strength.
thing # 1133926 for the x-axis carriage.
thingiverse
free
MakersDR Prusa i3 2020 - Folgertech Upgrade by E2E_Makers
...ip ties.
z axis:
stepper motors horizontally aligned.
smooth rod and m5 threaded rod equaly spaced with x axis.
reduced z wobble.
thingiverse
free
Folgertech Prusa I3 X axis belt tensioner "Folgermod" by ConceptualmaN
...stops first. that mod and how to make the belt tensioner with that part are described in this video:
https://youtu.be/zhev12ntcdg
Tensionner
thingiverse
free
y Bracket with built in tensionner by jfpion
...y bracket with built in tensionner by jfpion
thingiverse
y bracket for prusa with built in tensionner
thingiverse
free
X axis belt tensionner for Da Vinci printers
...x axis belt tensionner for da vinci printers
thingiverse
this is the replacement part for the belt tensionner on the x axis
thingiverse
free
Adjustable belt tensionner M6 screw by wroux
...ble belt tensionner m6 screw by wroux
thingiverse
i remixed xifle tensionner for using with m6 socket set screw cup point i own.
thingiverse
free
Mingda X-Axis Tensionner by tilange
...mingda x-axis tensionner by tilange
thingiverse
2 or 4 m3 bolt needed .. !
thingiverse
free
Horizontal pulley tensionner by Jcauet
... lenght (this part is optional)
p.s.:i've included the solidworks parts so feel free to use them and modify the measurements.
thingiverse
free
Mingda X-Axis Tensionner by tilange
...command to thread them with a bolt before installation.
you need to unscrew the bolt and pulley to be able to add the tensionner.
thingiverse
free
Prusa i3 x-belt tensionner remix by mokash770
... x-belt tensionner remix by mokash770
thingiverse
modified for protruding rods from thinghttp://www.thingiverse.com/thing:160636
thingiverse
free
Anet A8 X Belt holder and tensionner by delian2
...and thinner.
i did not change the tighter, even if the belt is still touching a little bit but a little bit of sanding is enough.
thingiverse
free
Anet E10 Y Belt Tensionner for by babounx
...plate can go to the end of the bed.
my youtube french channel https://www.youtube.com/user/babounx
my blog : babounx.blogspot.com
thingiverse
free
Boucle de sac à dos - Backpak belt tensionner by gprint3d
...impression3dfr
this is my own design you can sell it ! you can't share it if you don't give the link of the file.
thanks.
Ffleurey
thingiverse
free
DIVERSIFY Logo/Keyring by ffleurey
...diversify logo/keyring by ffleurey
thingiverse
made for the diversify research project (http://diversify-project.eu/)
thingiverse
free
Robot wheels and tires by ffleurey
...robot wheels and tires by ffleurey
thingiverse
the wheel was printed in pla and the tire in flexible material (pfe).
thingiverse
free
Adjustable Foot for Tables and Furnitures by ffleurey
...adjustable foot for tables and furnitures by ffleurey
thingiverse
made around an m8 bolt and nut.
thingiverse
free
Baby gym / playing support by ffleurey
... playing support by ffleurey
thingiverse
not sure how to call it but babies like it :-)
see the instructions for how to build.
thingiverse
free
Butterfly nut for M4 by ffleurey
...t smaller :-)
for hinged extruder and other narrow speces check the small version here: http://www.thingiverse.com/thing:108662
thingiverse
free
3D Printable SINTEF Logo by ffleurey
...xtruding dxf shapes in openscad.
sintef (http://www.sintef.no) is the largest independent research organisation in scandinavia.
thingiverse
free
Butterfly nut for M6 by ffleurey
...actually m6.
this is a customization / modification of the m5 version for a larger 10mm (m6) nut but keeping the nob identical.
thingiverse
free
Bigger Motor Hub for Gravitrax Motorized Marble Lift by ffleurey by makerbotschmidtienet
...eurey was to narrow, so that the spiral has no connection. i added a little ring so that it fit better and connect to the spiral.
thingiverse
free
Parametric Closet Rod Bracket by ffleurey
...so far i like it!
there are more parameters in the opensscad script to change the thickness and the size of the mounting holes.
thingiverse
free
ThingML Keyring by ffleurey
...s (iot) systems. it is open-source and available at http://www.thingml.org. it can for example be used to program arduino boards.
Upgrade
thingiverse
free
upgrade graber
...upgrade graber
thingiverse
upgrade graber
thingiverse
free
Ultimaker Feeder Upgrade, Upgrade :) by yzorg
...deformation.
i made this grooved ring for the new feeder upgrade from ultimaker.
replaces the delrin ring.
test at your own risk.
thingiverse
free
Crosshairs upgrade
...crosshairs upgrade
thingiverse
upgraded wheels, hubcaps and axle joints for a certain transforming robot toy. print 4 of each.
thingiverse
free
Slingfire upgrades by RayvenLover
...slingfire upgrades by rayvenlover
thingiverse
slingfire upgrade.
thingiverse
free
Drawer Upgrade. by AcTiv
...drawer upgrade. by activ
thingiverse
drawer upgrade.
thingiverse
free
RF1000 Upgrade by LHardy
...rf1000 upgrade by lhardy
thingiverse
rf1000 upgrade
thingiverse
free
Tronxy X3 upgrades
...tronxy x3 upgrades
thingiverse
3 axis upgrades
thingiverse
free
Upgrade Anet ET4
...upgrade anet et4
thingiverse
39/5000
upgrade parts for anet printer
thingiverse
free
reel upgrade by gjay21
...reel upgrade by gjay21
thingiverse
upgrade for the fishing rod http://www.thingiverse.com/thing:896767
thingiverse
free
ender 3 upgrade by dog19721972
...ender 3 upgrade by dog19721972
thingiverse
upgrade
Belt
thingiverse
free
belt
...belt
thingiverse
belt sleeve for 35mm wide..
use tpu or tpu95
gcode ready
thingiverse
free
Belt hanger for mission belt by maburke
...belt hanger for mission belt by maburke
thingiverse
hanger for mission belt- hangs belt nicely on the closet rod
thingiverse
free
Belt Hanger (For Belts With a Stud) by SamuelSVD
...belt hanger.
this belt hanger works by placing the stud on the belt in the hole, then hang the hanger.
yep, it's that simple.
thingiverse
free
Belt hanger for Trakline belt by tomasf
...belt hanger for trakline belt by tomasf
thingiverse
a hanger for a single trakline belt.
thingiverse
free
Belt clip for 9 mm belt by papat400
...belt clip for 9 mm belt by papat400
thingiverse
remix the belt lock gt2 for a 9mm belt
thingiverse
free
Belt Rack
...belt rack
thingiverse
belt hanger
thingiverse
free
Belt Holder
...belt holder
thingiverse
a simple belt holder.
thingiverse
free
Hermes belt buckle for 31mm belt by Hubiro
...hermes belt buckle for 31mm belt by hubiro
thingiverse
hermes belt buckle for 31mm belt
perfect to order as metal print :-)
thingiverse
free
Bugatti belt buckle for 31mm belt by Hubiro
...t buckle for 31mm belt by hubiro
thingiverse
bugati belt buckle made for 31mm hermes belt.
perfect to order as a metal print :-)
thingiverse
free
Belt tensioner for GT2 belts by Endlesscnc
...oner little different.
after print you will need a:
m3 nut
m3 x10+ (screw length your choice)
is for the gt2 belt with 6mm width
I3
thingiverse
free
Carriage for Graber i3/Prusa i3 by orange2120
...carriage for graber i3/prusa i3 by orange2120
thingiverse
a carriage for graber i3/prusa i3 with laser mount
thingiverse
free
I3 by singwanlew
...i3 by singwanlew
thingiverse
just prototyping my i3.
thingiverse
free
i3 MOSFET Holder / i3 MOSFET Halter by JMDesigns
...i3 mosfet holder / i3 mosfet halter by jmdesigns
thingiverse
i3 mosfet holder / i3 mosfet halter
thingiverse
free
i3-corner by guohc
...i3-corner by guohc
thingiverse
for prusa i3
thingiverse
free
i3 xCarriage by Robi1602
...i3 xcarriage by robi1602
thingiverse
i3 carriage
thingiverse
free
Wanhao i3 & i3 Plus XT60 board mods by jpasternack
...wanhao i3 & i3 plus xt60 board mods by jpasternack
thingiverse
wanhao i3 & i3 plus xt60 board mods
thingiverse
free
Prusa i3 by plangdon
...prusa i3 by plangdon
thingiverse
files for prusa i3
thingiverse
free
Atualização Graber i3
...atualização graber i3
thingiverse
melhorias graber i3 mdf
thingiverse
free
i3 Mega new
...i3 mega new
thingiverse
new idea i3 mega anycubic
thingiverse
free
prusa i3 ??? ???? by jellyalex978
...prusa i3 ??? ???? by jellyalex978
thingiverse
prusa i3 ??? ????
m8 60mm
m6 ???
Prusa
thingiverse
free
Prusa without Prusa (rc2) by madless
...prusa without prusa (rc2) by madless
thingiverse
just the main part of prusa rc2 faceshield, without writing.
enjoy :)
thingiverse
free
Prusa by acejbc
...prusa by acejbc
thingiverse
prusa knob info
m3 8mm screw
thingiverse
free
Prusa house
...prusa house
thingiverse
how prusa house could look like...
thingiverse
free
Prusa Mk2 "Fake Prusa" LCD cover by anraf1001
...r by anraf1001
thingiverse
version of prusa's lcd cover with "fake prusa" instead of "original prusa"
thingiverse
free
Prusa stabilizator by gutiueugen
...prusa stabilizator by gutiueugen
thingiverse
prusa stabilizator
thingiverse
free
Keychain Prusa by rbarbalho
...keychain prusa by rbarbalho
thingiverse
keychain with text prusa.
thingiverse
free
remake of Prusa Mini
...remake of prusa mini
thingiverse
remake of prusa mini
thingiverse
free
Prusa i3 by plangdon
...prusa i3 by plangdon
thingiverse
files for prusa i3
thingiverse
free
Mini Prusa (Prusa Mate) by neil3dprints
...cify which colors are required and if color changes are needed as well as heights to apply the color changes.
happy printing. :-)
thingiverse
free
prusa i3 ??? ???? by jellyalex978
...prusa i3 ??? ???? by jellyalex978
thingiverse
prusa i3 ??? ????
m8 60mm
m6 ???