Proper Bias Tape maker 1/2 " for sewing machine, hem

Last crawled date: 4 years, 2 months ago

I tried to use some bias tape maker posted previously by others on TW but for some reason the files would have non-manifold geometry and it would freak out my slicer and not printing it correctly so I decide to make my own from scratch and properly.
It has little wings that can be used to attach it to sewing machine with a tape so you can create bias tape and sew it all on the same time. On the picture with my machine you would normally have to use double needle to crate and sew it this way. So don't question how my setup would work with a single needle because it wouldn't.
It is rotated the correct way for printing - no support needed.
I used 100% infill - it is small, no need to go less.
To load strip, cut it at angle and then use scissors or screwdriver to push it through the window. So you need about 1" strip that would create 1/2 inch.
In the future I may expand it further to create double fold tape.