Thingiverse
Profile mount for Virpil VPC MongoosT-50CM2 Base by RCHeliGuy
by Thingiverse
Last crawled date: 3 years ago
This allows mounting a Virpil Mongoose CM2 base to a piece of upright 40x40 profile.
This is a video showing mounting this.https://www.youtube.com/watch?v=QwBHB406zJQ&ab_channel=MarkKovalcson
The profile is offset enough to connect the 5 pin din connector, but not the AUX connector which is directly behind the profile. There is also a USB cable support.
I printed with 2mm top and bottom and 6 perimeter walls with 15% infill. It takes a while to print, but is very solid. PLA is working well for me so far.
Hardware:
4 x M5x30mm socket head bolts ( attach to the Virpil base )
1 x M8x16mm socket head bolt ( bolts straight down into 40 profile threaded hole )
4 x M8x16 bevel head bolts ( attach to the sides of the profile)
4 x M8 T-nuts
The top M8 bolt requires that you tap threads into the end hole of the 40x40 profile.
This is a video showing mounting this.https://www.youtube.com/watch?v=QwBHB406zJQ&ab_channel=MarkKovalcson
The profile is offset enough to connect the 5 pin din connector, but not the AUX connector which is directly behind the profile. There is also a USB cable support.
I printed with 2mm top and bottom and 6 perimeter walls with 15% infill. It takes a while to print, but is very solid. PLA is working well for me so far.
Hardware:
4 x M5x30mm socket head bolts ( attach to the Virpil base )
1 x M8x16mm socket head bolt ( bolts straight down into 40 profile threaded hole )
4 x M8x16 bevel head bolts ( attach to the sides of the profile)
4 x M8 T-nuts
The top M8 bolt requires that you tap threads into the end hole of the 40x40 profile.
Similar models
thingiverse
free
Virpil MongooseT-50 Throttle mount to 40 Series Profile by RCHeliGuy
...t head hex bolts to secure the mount to the throttle.
4 x m8-16mm bevel head hex bolts
1 x m8-16mm socket head bolt
5 x m8 t-nuts
thingiverse
free
Slightly overbuilt paper towel roll mount by Vandelayandco
...l mounts to the clamp (i used 10-32 flat head bolts and tapped the holes but you do you)
6x #10 screws to attach to wall/whatever
thingiverse
free
Virpil Controls VPC base adapter for 8020 profiles by sorcererlc
... adapter i used the included counter sunk bolts that came with it and for mounting the adapter to the frame i used m8 15mm bolts.
thingiverse
free
M8 socket/allen head bolt cap. by KwakaNOS
...for bolts with socket/allen heads.
was drawn to match the size of those used on the gpz600r
for best finish top requires sanding.
grabcad
free
BUTTON HEAD BOLT M8 X 16MM
...button head bolt m8 x 16mm
grabcad
metric 8 x 16mm button head bolt with 5mm socket
grabcad
free
4 pin circular connector
...4 pin circular connector
grabcad
binder 718 series m8 male panel mount connector, 4 contacts socket
grabcad
free
1/4-20 x 1" socket head bolt
...1/4-20 x 1" socket head bolt
grabcad
threads and knurling modeled.
grabcad
free
Monitor Mounting System
...ocking nuts
-iso 4762x70 m8 socket head cap screws
-iso 4762x25 m8 socket head cap screws
-iso 4762x100 m8 socket head cap screws
thingiverse
free
M8 handle bar socket head bolt cap Kawasaki GPz600R by KwakaNOS
...t cap for handlebars on kawasaki gpz600r.
printed in pla with 100% infill as so small. i smoothed the top off with sanding paper.
thingiverse
free
Ball-head mobile phone holder Sovol SV01 by Paddy_91088
...n a profile strip. t-nuts not included. base part has 4x threaded holes m4 with countersink.
150mm high, 100mm wide, 40x 60 base.
50Cm2
thingiverse
free
Virpil Gear Handle Switch by mark_antony007
...base to work with the switches of a virpil mongoost-50cm2 throttle. i use it on t4. printed upside down...
thingiverse
free
Virpil Controls VPC base adapter for 8020 profiles by sorcererlc
...that i have but it should work for the mongoost-50cm2 as well since they share case dimensions and bolt...
Mongoost
thingiverse
free
Virpil Gear Handle Switch by mark_antony007
...base to work with the switches of a virpil mongoost50cm2 throttle. i use it on t4. printed upside down...
thingiverse
free
Virpil MongooseT-50 Throttle mount to 40 Series Profile by RCHeliGuy
...rcheliguy thingiverse this is a mount for a virpil mongoost50 throttle. there are two versions. there is a _cm1...
thingiverse
free
Virpil Controls VPC base adapter for 8020 profiles by sorcererlc
...that i have but it should work for the mongoost50cm2 as well since they share case dimensions and bolt...
thingiverse
free
Magswitch Profile Quick Release for Flight Stick by RCHeliGuy
...this in action.https://www.youtube.com/watch?v=gseiu2atdtc&ab_channel=markkovalcson this does not include the virpil mongoost50 cm2 mount, or the cosmetic cover they are in...
Virpil
thingiverse
free
Virpil Joystick Extension (20cm)
... extension for my mongoose t50 joystick, it may fit other virpil joysticks or even the warthog, but i don't have any to test.
thingiverse
free
Virpil CM3 Throttle Lock Bushing by SamJohnsonTB
...ushing to eliminate the play between the throttles on the virpil mongoose cm3 throttle. slightly tapered to help with alignment,
thingiverse
free
Virpil Gear Handle Switch by mark_antony007
...th the switches of a virpil mongoost-50cm2 throttle. i use it on t4.
printed upside down with raft and supports.
0.12mm
20 infill
thingiverse
free
Bracket for Virpil MongooseT50 by JolietDelta
...a desk mount from monstertech. brackets are angled by 7° towards the user, and are for both left / right hand joystick positions.
thingiverse
free
HOTAS Joystick Extension 60 degree Warthog / Virpil Compatible by Swixx
...verse
ive modified the part from huzarski to make a slanted mount for the virpil/warthog sticks to better use it for space sims.
thingiverse
free
Obutto Virpil T-50 Mount by MikeHotelEcho
...inted in xt-cf20 with the settings below, works pretty damn well. still a little bit of flex, but nothing that affects precision.
thingiverse
free
Virpil CM3 Throttle, WarBRD adapter plates for JPEIN by dwdh586
...hrottle and warbrd base (grip agnostic).
recommended infil for the actual plates - 50%, you can get away with 20% on the endcaps.
thingiverse
free
8020 Thrustmaster / Virpil Stick Display Mount by ATAG_Invictus
...t. its made to fix 40 series aluminum extrusion using 8mm bolts, but should work for 10 or 15 series extrusions as well. enjoy!
thingiverse
free
Cupholder for Virpil CM2/CM3 throttle or control panel by Japfingsten
...g m6x20 bolts. very sturdy. holds my tea can's perfectly, but making a bigger version. will also work with the control panel.
thingiverse
free
Plattform for VIRPIL T-50 cm 2/3 by Bad_Lieutenant_666
...plattform for virpil t-50 cm 2/3 by bad_lieutenant_666
thingiverse
you need 2 m6x20 screws
Rcheliguy
thingiverse
free
Simlab vertical Fairings by RCHeliGuy
...thingiverse
something to dress up the plate that holds the vertical profile in place
requires one m8x16 bolt and t-nut to mount.
thingiverse
free
Racing Glove Holder by RCHeliGuy
...rig.
fits 40 series 120mm uprights on a profile rig.
uses a single m8x16 bolt to attach
has a rib that fit in the 40 series slot.
thingiverse
free
Profile 8020 End Cap by RCHeliGuy
...20 end cap by rcheliguy
thingiverse
an 8020 end cap didn't exists, so i made one to finish off the open end of my dead pedal
thingiverse
free
Single Angled Exhaust for flexible configuration by RCHeliGuy
...grees and 70mm in diameter these can be printed in any number and turned to point in any direction.
each will take an m8x16 bolt.
thingiverse
free
Phone Holder by RCHeliGuy
...e for her phone for video meetings, so i bumped the dimensions a bit.
both have m5 bolt holes.
smaller = 25mm oc
larger = 37mm oc
thingiverse
free
Neutrik 2,4 Pole mount by RCHeliGuy
...eries profile
https://www.amazon.com/gp/product/b07z3fxr8l
it uses 2 x m3x12 bevel head bolts to hold the receiver to the mount.
thingiverse
free
SimLab SC2 mount cover V3 by RCHeliGuy
... cap bolts.
i've removed the original stl file which had a couple flaws and replaced it with something a bit cleaner looking.
thingiverse
free
Trackball Mouse Support by RCHeliGuy
...ack of my pse usb mount back and then melted those holes open to insert more m3 threaded inserts as shown in one of the pictures.
thingiverse
free
Cup Holder ( Sim Racing God ) by RCHeliGuy
...iate.
this has the same dimensions as my other 32 oz camelbak cup holder.
it has 8mm bolt holes 40mm apart for a profile sim rig.
thingiverse
free
SimRig Camelbak Cup holder by RCHeliGuy
... adapter ( 28" long )
and a magnetic tube clip
the bite tube can clip to your 4 or 5 point shoulder harness for long races.
Vpc
thingiverse
free
VPC Mouse Mount Adapter Riser by Bad_Lieutenant_666
...vpc mouse mount adapter riser by bad_lieutenant_666
thingiverse
this is a riser vor the mouse pad
thingiverse
free
VPC MT-50 Throttle Detent modification by ConTrollR
... detents for afterburner and idle. you need 10 mm m6 ball plungers, m3 screws and these:https://www.thingiverse.com/thing:4625195
thingiverse
free
FLIR Boson 640 (14mm) + Boson VPC
...after technical drawings accessible through the linked websites.
includes stl, iges, obj, skp (sketchup), f3d (fusion 360) files.
thingiverse
free
Throttle lever clamps for the VPC MT-50, CM & CM2 by ConTrollR
...he throttle levers and are supposed to be used with my detent designs for the virpil vpc mt-50, mt-50 cm and mt-50 cm2 throttles.
thingiverse
free
VPC WarBRD Base Mount Plate for Motedis 40 x 40
...edis profile 40x40l i-type slot 8.
will require 2 t-slot nuts, and 2 mounting brackets to hold the overhanging part of the plate.
thingiverse
free
VPC MT-50 CM2 Throttle Detents with Idle lock by ConTrollR
...wn.
the modification requires 10mm m6 ball plungers, m3 screws, springs and these files:https://www.thingiverse.com/thing:4625195
thingiverse
free
VPC MT-50 CM2 Hi/Lo/Center detents rail SMALL by ConTrollR
...the original design to compensate for users that have size issues with the original.
note that this design has not been tested...
thingiverse
free
VPC MT-50 CM2 Trottle Detent center rail by ConTrollR
...ons for afterburner and idle.
needs 10-12mm m6 ball plungers, m3 screws and these files:https://www.thingiverse.com/thing:4625195
thingiverse
free
VPC CM3 Throttle Detent arc by ConTrollR
...int the arc on its side.
adjust the arc position so that tha aft shut off detent is at the lowest position of the throttle lever.
thingiverse
free
Virpil Controls VPC base adapter for 8020 profiles by sorcererlc
... adapter i used the included counter sunk bolts that came with it and for mounting the adapter to the frame i used m8 15mm bolts.
Profile
3ddd
$1
Profile
... лофт , профиль , свип
описание ниже
3d_export
$5
profile anchor
...profile anchor
3dexport
profile anchor
3d_export
$5
profile fastener
...profile fastener
3dexport
profile fastener
3ddd
$1
Profil Doors
...
3ddd
profil doors , дверь
двери и наличник profil doors модели 7х и 15х, цвет капучино.
3ddd
$1
Profile chair
...rofile
http://www.casefurniture.co.uk/contemporary-furniture-products/contemporary-chairs-benches-stools/profile-chair/
3ddd
$1
Profil Doors
...dd
двери , profildoors
дверь profil doors
серия - vg
модель - 4vg
цвет - чёрный матовый
3d_export
$5
profile hand wheel
...profile hand wheel
3dexport
profile hand wheel
3d_export
$5
profile rotation handle
...profile rotation handle
3dexport
profile rotation handle
3d_ocean
$6
Low Profile Radiator
...low profile radiator
3docean
heat heater hot pipe radiator temperature thermostat warm
a low profile version of the radiator
3d_export
$10
Aluminum profile 3D Model
...aluminum profile 3d model
3dexport
aluminum profile window sample corner
aluminum profile 3d model 3dstocker 27361 3dexport
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)
Base
archibase_planet
free
Base
...base
archibase planet
base column column base
base 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column base column
base 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 4 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column base column
base 6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
foundation base
column base ionic - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
foundation base
column base tuscan - 3d model (*.gsm+*.3ds) for interior 3d visualization.
design_connected
$18
Base
...base
designconnected
tom dixon base computer generated 3d model. designed by dixon, tom.