Thingiverse
Printrbot Simple XL Tower Filament Guide by plastiqmanb
by Thingiverse
Last crawled date: 2 years, 11 months ago
Here's to all of us that have the Printrbot Simple with the XL Tower / Build Volume Tower Upgrade. Where the filament goes to the left and slips off the extruder bearing... This solves the problem by forcing the filament to the right. Also I found that the printrbot bearings were too far offset for my other spools so I created a simple rectangle to hold the two bearing holders from Small Spoolholder by JohnSL (http://www.thingiverse.com/thing:93652)
This filament guide is mounted using the same allen screws from the Simple kit (you should have some extra) with drilling a 5/64" hole. The dimensions of the mount hole are: 5.9mm countersink diameter with 3.75mm countersink depth. The inner hole is 3.75mm to clear the screw threads. This is oversized a bit to accomidate shrinkage from your printer.
Good luck!
This filament guide is mounted using the same allen screws from the Simple kit (you should have some extra) with drilling a 5/64" hole. The dimensions of the mount hole are: 5.9mm countersink diameter with 3.75mm countersink depth. The inner hole is 3.75mm to clear the screw threads. This is oversized a bit to accomidate shrinkage from your printer.
Good luck!
Similar models
thingiverse
free
Printrbot Simple XL Tower V2 Cable Management Mount by Bobalicious
...crew directly into tower
some area are a little thin but it still worked for me. i will beef these areas up when i get a chance
thingiverse
free
Filament guide for 2013 Printrbot Simple by Scibrary
... drive gear and bearing in the extruder assembly, i designed this filament guide for the 2013 printrbot simple (maker's kit).
thingiverse
free
Printrbot filament guide by martinpineyro
...rintrbot filament guide by martinpineyro
thingiverse
very simple filament guide for the printrbot. the hole is for 3mm filament.
thingiverse
free
Printrbot Simple Filament Guide by jeromedayton
... the extruder gear. print it, measure for holes on top of extruder assembly, very carefully drill holes, and then mount.
enjoy
thingiverse
free
Printrbot LC Filament Guide by lthomas987
...printrbot lc filament guide by lthomas987
thingiverse
filament guide with bearing to be mounted on 8mm rod.
thingiverse
free
Printrbot Simple XL Tower GoPro Mount by evannguyen
... the xl tower wall. with wifi enabled, i can periodically check on the status of my print and/or record the printrbot in action.
thingiverse
free
Printrbot Simple - Dead Simple Filament Guide by 8Complex
...trbot simple's filament from creeping out the side of the hobbed bolt. this sits in place by gravity, no need to drill holes.
thingiverse
free
CR-6SE BALL BEARING PULLEY FILAMENT GUIDE by HAAUK
...m3 x 20mm++ screws to mount the plate and pulley
it is designed for a 1608 ball bearing because i have many of those lying around
thingiverse
free
Printrbot Simple Metal filament spool rack for small (25mm hole) center spools by ReMake
...ed.
this is a work in progress - i will post an update when the latest stl has been tested (see details in post-printing section)
thingiverse
free
PrintrBot simple metal filament guide by iClint
...ol holder fitted with the v-roller bearing guide.http://www.thingiverse.com/thing:1443303http://www.thingiverse.com/thing:1474236
Plastiqmanb
thingiverse
free
Printrbot Plus Filament / Extruder Guide by plastiqmanb
... of the knobbed bolt.
for those with other printrbot's your dimensions may vary. a bit of xacto trimming may be necessary.
thingiverse
free
Filament guide for printrbot plus v2 by RickS
...to move during print. all credit is due to plastiqmanb ...
Printrbot
thingiverse
free
printrbot gasket by Usernameunavailible
...printrbot gasket by usernameunavailible
thingiverse
a part for printrbots
thingiverse
free
Printrbot Aluminum by Chris_the_Carpenter
...printrbot aluminum by chris_the_carpenter
thingiverse
a redesign of the awesome printrbot, in aluminum.
thingiverse
free
PrintrBot keychain by SuperMaku
...printrbot keychain by supermaku
thingiverse
printrbot keychain. may need to be scaled up.
thingiverse
free
Printrbot foot by aliekens
...printrbot foot by aliekens
thingiverse
add wider feet to a printrbot for improved stability.
thingiverse
free
Printrbot to CNC by mmrrsiam
...printrbot to cnc by mmrrsiam
thingiverse
make your printrbot also a small cnc machine....
thingiverse
free
Printrbot Keychain by jackbivona
...printrbot keychain by jackbivona
thingiverse
printrbot keychain for all you pb customers out there
thingiverse
free
Printrbot+ Nutkeepr by DonaldJ
...printrbot+ nutkeepr by donaldj
thingiverse
clip to retain nut on z-axis threaded rod of printrbot+
thingiverse
free
PrintrBot Tool Caddy by spr_consulting
...printrbot tool caddy by spr_consulting
thingiverse
printrbot tool caddy.
thingiverse
free
Printrbot Sensor Wrench by spr_consulting
...printrbot sensor wrench by spr_consulting
thingiverse
curvaceous printrbot sensor wrench.
thingiverse
free
Spool Holder for Printrbot by doubleAdoubleU
...spool holder for printrbot by doubleadoubleu
thingiverse
spool holder for a printrbot simple metal
Xl
turbosquid
$33
Nokia XL and XL Dual Orange
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Nokia XL and XL Dual Yellow
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Nokia XL and XL Dual Cyan
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Nokia XL and XL Dual Black
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$13
Diana XL
...diana xl
designconnected
delightfull diana xl computer generated 3d model.
3ddd
$1
модель XL
...модель xl
3ddd
sklo+glas , дверь
стеклянные двери фирмы sklo+glas , модель xl
turbosquid
$69
Nokia XL and XL Dual All Color
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$33
Nokia XL and XL Dual Bright Green
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Oslo XL LB
...oslo xl lb
3ddd
камин , oslo
камин oslo xl lb
3ddd
$1
BAY XL
... giulio marelli
giulio marelli italia. bay xl.
диван, дизайн studio crgm в тканевом исполнении.
длина: 2.55
Guide
turbosquid
$15
Guide drawer
...squid
royalty free 3d model guide drawer for download as dwg on turbosquid: 3d models for games, architecture, videos. (1261387)
turbosquid
$1
Road Guide
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archive3d
free
Guide-board 3D Model
...ion sign guide sign
guide-board n170112 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
turbosquid
$2
soap cutter guide
...
royalty free 3d model soap cutter guide for download as stl on turbosquid: 3d models for games, architecture, videos. (1694030)
turbosquid
$15
Blind Guiding tiles
...free 3d model blind guiding tiles for download as 3dm and dae on turbosquid: 3d models for games, architecture, videos. (1156598)
turbosquid
$10
CNC Linear Guide
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Tank Model Guide
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Road Guide 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$9
Guide Books 3
...sformed separately and each have unique texture map on front and back cover. to make your work easier this model comes in thre...
3d_ocean
$9
Guide Books 2
...ransformed separately and each have unique texture map on front and back cover. to make your work easier this model comes in t...
Tower
archibase_planet
free
Tower
...kremlin tower spasskaya tower
tower kremlin spasskaya tower n120615 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
archibase_planet
free
Tower
...r kremlin tower petrovskaya tower
tower petrovskaya kremlin n120615 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
archibase_planet
free
Tower
...ino-eleninskaya tower
tower constantino eleninskaya kremlin n120615 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
archibase_planet
free
Tower
...tower
archibase planet
tower statuette eiffel tower
tower decor n180914 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tower
...lanet
tower construction building
tower polices post street tower n110913 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3d_export
$5
tower
...tower
3dexport
a fortified tower with a moat.
archibase_planet
free
Tower
...tower
archibase planet
building tower construction
tower n300712 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Tower
...uilding kremlin construction
tower 2 vtoraya bezymyannaya kremlin n100914 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Tower
...tower
archibase planet
forcetower tower
forcetower - 3d model for interior 3d visualization.
archibase_planet
free
Transmission tower
...lectricity pylon lattice tower framework tower
transmission tower n121015 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
Filament
3ddd
$1
Filament Cage
...filament cage
3ddd
лофт , filament cage
модель бра, делалась по фото!
turbosquid
$3
FILAMENT COUNTER
...d
royalty free 3d model filament counter for download as stl on turbosquid: 3d models for games, architecture, videos. (1563049)
3d_export
$5
Filament lamp 3D Model
...filament lamp 3d model
3dexport
filament lamp 3d model kevin 54161 3dexport
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament bulb candle 3D Model
...filament bulb candle 3d model
3dexport
filament bulb-candle
filament bulb candle 3d model kevin 54163 3dexport
3ddd
$1
Factory filament metal shade
...factory filament metal shade
3ddd
restoration hardware
restoration hardware. 20th c. factory filament metal shade.
Simple
turbosquid
$1
Simple goblet (Taca simples)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
simple bench
...simple bench
3dexport
the simple bench which can be used in simple projects or video-games.
3d_export
$5
simple knob
...simple knob
3dexport
simple knob
3d_export
$5
simple handle
...simple handle
3dexport
simple handle
3d_export
$5
simple button
...simple button
3dexport
simple button
3d_export
$5
simple spindle
...simple spindle
3dexport
simple spindle
3d_export
$5
simple wheel
...simple wheel
3dexport
simple wheel
3d_export
$5
simple chair
...simple chair
3dexport
simple blue chair
3d_export
free
Simple room
...simple room
3dexport
here is a simple but beautiful room
3ddd
free
SIMPLE | Кресло
...io cianfarra , simple
производитель area declic дизайн giulio cianfarra коллекция simple