GrabCAD
Printed PaulSat
by GrabCAD
Last crawled date: 1 year, 11 months ago
This entry is based on my long experience in designing and manufacturing CubeSat frames. I designed the structure of ESTCube-1 (first Estonian satellite which is in orbit) and CubeSat structure product line for my company. Designing and assembling real CubeSats and performing space qualification testing has given very good experience and know-how. This is valuable because too many other CubeSat structure designs have been inspired by Pumpkin CubeSat Kit but much more elegant and mass-efficient designs are possible.
This design is based on the idea of removing stack beams and standoffs between subsystems and using on-demand 3D printing to manufacture corner slots with very small margins to keep the subsystem printed circuit boards (PCBs) in place. One of the solar panels (see the rendering) will keep the PCBs tightly fastened so the stack would not slide back out.
NB! See the longer description document under files!
-- DESIGN AND ADVANTAGES --
Benefits of this design:
• Structure is only one single part.
• Helicoil reinforced solar panel mounting holes to attach and remove side panels many times.
• Possible to manufacture with current technologies.
• Mass of 1U aluminium structure is only 54 grams. It really is that low. Likely can be optimized even more.
• Made from aluminium. Does not cause additional thermal, radiation or outgassing concerns.
• Quick and easy modifications, might just have to change PCB distances and thicknesses.
• Deployment switch and separation spring are integrated as one.
• Scalable to 12U and more, depending on exact configuration.
• Conforms to CubeSat Specification and launcher requirements.
Process of designing and assembling this structure:
1. Design CubeSat in 3D modelling software.
a. Choose or design satellite subsystems and connect them with common PC104 connectors or by using a separate PCB back-plate which is like a motherboard in PCs. Both solutions are supported.
b. Quickly and effortlessly modify distances between corner slots, which will hold PCBs in place and create all other modifications if necessary.
2. Send CubeSat structure model to on demand additive manufacturing.
3. Assemble PCB stack outside of the frame.
4. Attach some solar panels and antennas to the structure. Use common screws to mount them or use some compliant mechanism option in the future.
5. Start inserting the PCB stack into the frame from one of the sides specially meant for this.
6. During insertion connect solar panel, antenna, Sun sensor etc cables. Also connect the cables for panels which have not yet been mounted to the structure.
7. Attach the last remaining solar panels. One of them will fix the PCB stack securely and tightly into place (rendering with the solar panel). These (corner) slots will be the exact size as PCB boards with very small margins.
-- ADDITIVE BUILD PROCESS AND MATERIAL --
Aluminium AlSi10Mg with Direct Metal Laser Sintering (DMLS) is the choice for an already common build process. Main reasons for using metals are better radiation protection and self-supporting nature of the DMLS build chambers. Downside is the build volume because common 3D printers will limit printing to 1U and 2U CubeSats but new EOS M400 has 400 mm x 400 mm x 400 mm build volume allowing printing of CubeSats up to 27U. Aluminium already complies with all the environmental requirements (incl. thermal and outgassing) as well as CubeSat standard and dispenser requirements.
Future improvement expectations:
• Compliant mechanism solar panels. Waiting to be able to print different materials with DMLS/SLS so that frame can be from aluminium and compliant mounting mechanism from plastic/composite.
• Deployment switch and separation spring may be attached during printing by stopping the process and then continuing.
Stack 3D models are from GomSpace and CubeSpace.
This design is based on the idea of removing stack beams and standoffs between subsystems and using on-demand 3D printing to manufacture corner slots with very small margins to keep the subsystem printed circuit boards (PCBs) in place. One of the solar panels (see the rendering) will keep the PCBs tightly fastened so the stack would not slide back out.
NB! See the longer description document under files!
-- DESIGN AND ADVANTAGES --
Benefits of this design:
• Structure is only one single part.
• Helicoil reinforced solar panel mounting holes to attach and remove side panels many times.
• Possible to manufacture with current technologies.
• Mass of 1U aluminium structure is only 54 grams. It really is that low. Likely can be optimized even more.
• Made from aluminium. Does not cause additional thermal, radiation or outgassing concerns.
• Quick and easy modifications, might just have to change PCB distances and thicknesses.
• Deployment switch and separation spring are integrated as one.
• Scalable to 12U and more, depending on exact configuration.
• Conforms to CubeSat Specification and launcher requirements.
Process of designing and assembling this structure:
1. Design CubeSat in 3D modelling software.
a. Choose or design satellite subsystems and connect them with common PC104 connectors or by using a separate PCB back-plate which is like a motherboard in PCs. Both solutions are supported.
b. Quickly and effortlessly modify distances between corner slots, which will hold PCBs in place and create all other modifications if necessary.
2. Send CubeSat structure model to on demand additive manufacturing.
3. Assemble PCB stack outside of the frame.
4. Attach some solar panels and antennas to the structure. Use common screws to mount them or use some compliant mechanism option in the future.
5. Start inserting the PCB stack into the frame from one of the sides specially meant for this.
6. During insertion connect solar panel, antenna, Sun sensor etc cables. Also connect the cables for panels which have not yet been mounted to the structure.
7. Attach the last remaining solar panels. One of them will fix the PCB stack securely and tightly into place (rendering with the solar panel). These (corner) slots will be the exact size as PCB boards with very small margins.
-- ADDITIVE BUILD PROCESS AND MATERIAL --
Aluminium AlSi10Mg with Direct Metal Laser Sintering (DMLS) is the choice for an already common build process. Main reasons for using metals are better radiation protection and self-supporting nature of the DMLS build chambers. Downside is the build volume because common 3D printers will limit printing to 1U and 2U CubeSats but new EOS M400 has 400 mm x 400 mm x 400 mm build volume allowing printing of CubeSats up to 27U. Aluminium already complies with all the environmental requirements (incl. thermal and outgassing) as well as CubeSat standard and dispenser requirements.
Future improvement expectations:
• Compliant mechanism solar panels. Waiting to be able to print different materials with DMLS/SLS so that frame can be from aluminium and compliant mounting mechanism from plastic/composite.
• Deployment switch and separation spring may be attached during printing by stopping the process and then continuing.
Stack 3D models are from GomSpace and CubeSpace.
Similar models
grabcad
free
1U CubeSat
...1u cubesat
grabcad
1u cubesat with solar panels, structures and subsystems are modelized without any calculation.
grabcad
free
CUBESAT 1U
...cubesat 1u
grabcad
1u cubesat frame structure
grabcad
free
1U 2 Piece CubeSat with Built in Fasteners
...tom boards or components if he/she decides.
note: solar panels and flight computer board download links are in the word document.
grabcad
free
Cartridge loading CubeSat concept
...1u cubesat concept, intended for fdm using pei or similar pcb's installed into cartridge then loaded and clip locked...
grabcad
free
Deployable Solar Array
...ed antennas, magnetorquers and sensors for a 1u cubesat. this design was done during my internship at tunisian space association.
grabcad
free
The Kube
...ew slots for the mounts. this is the universally user-friendly cubesat frame of the future: the kube.
thank you, and good night!
grabcad
free
Integrated CubeSat
...e of functional integration into the structural parts make them complex and would require a time expensive manufacturing process.
grabcad
free
CubeSat Vent
... can be made for each cubesat differently because we use am process. it has also space made for scope or camera or other sensors.
grabcad
free
Revolutionary 1U CUBESAT
...obust and strong.
it has a very lightweight chassis for cost reduction.
the design is simple and 3d printing can easily be done.
grabcad
free
1x6U CubeSat Structure
...below.
information on this structure can be found in my thesis using this link:
http://dx.doi.org/10.13140/rg.2.2.26160.28164/1
Printed
design_connected
$27
...print
designconnected
moroso print computer generated 3d model. designed by wanders, marcel.
3ddd
free
Eichholtz Prints
...- eichholtz print central station i
13 - eichholtz print central station ii
14 - eichholtz print marisa
15 - eichholtz print tish
3ddd
$1
Eichholtz Prints
...print abstract - set of 2
10 - eichholtz print orange abstract
11 - eichholtz print buddha right
12 - eichholtz print buddha left
turbosquid
$1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Eichholtz Prints
...of 4
2 - print dunbar 2 set of 4
3 - print guadeloupe 1 set of 4
4 - print guadeloupe 2 set of 4
5 - print giles
6 - print trett
3ddd
$1
Eichholtz Prints
...nt tutti frutti
3 - eichholtz prints watson - set of 2
4 - eichholtz prints antique nautilus - set of 2
5 - eichholtz print tiara
3d_export
$5
Monster for printing
...monster for printing
3dexport
monster 3d model printing
3ddd
free
printed rug
...printed rug
3ddd
ковер
very creative printed rug
3ddd
free
Eichholtz Prints
...иал: бумага
габариты (вхш): 72 x 62 см
описание: print sweetmeat - постер в деревянной раме.
3 - prints varsity set of 2
арти
3ddd
free
Art Print Posters
...art print posters
3ddd
прованс
art print posters by patrician prints