Thingiverse
Printable I3 base by Zappyguy111
by Thingiverse
Last crawled date: 3 years ago
Now ABS safe!
Since the success of a 3D printable Y carriage in my current design, I have been requested to modify it for an i3.
This carriage is based on design and style of my highly successful carriage. The first design survived 3 re-designs of my 3D printer and about 2 years of use. Sagging due to radiant heat was what eventually lead to it being made obsolete. As such, I improved on the design, and I am happy to announce that it is now safe to use for ABS printing.
Features
The original design has been modified to accept the i3 Y mount and raised to fit into an i3's space. It has holes in the frame for zip ties to hold down the LMU88 bearings and the necessary attachments to stop the bearings slipping.
The part has now been updated to be 10mm thick, instead of the 5mm as bases were failing over long use. You can now use 3 point stabilisation, and it also has a mount for cable chains.
Requirements
It will require 16x25mm M3 screws and nuts to attach the legs to the body, washers are recommended. Also, 3 or 4x50mm M3 screws with nuts, washers and springs to keep the heated bed off the base. A sheet of cardboard and an air gap between the heater and the carriage is essential as it will protect the carriage from the heat radiating from the heated bed.
And as with all parts for your 3D printer, ABS is the recommended material to construct this part.
You will need 2 pairs of legs and one body to every base. Bearing mounts are optional.
PS.
I have since moved on from using a plastic bed carriage and I don't plan on further development of this project. As it may help those on a shoestring budget get their first printer up and running, I'll keep this part posted and available for those interested in experimenting.
Since the success of a 3D printable Y carriage in my current design, I have been requested to modify it for an i3.
This carriage is based on design and style of my highly successful carriage. The first design survived 3 re-designs of my 3D printer and about 2 years of use. Sagging due to radiant heat was what eventually lead to it being made obsolete. As such, I improved on the design, and I am happy to announce that it is now safe to use for ABS printing.
Features
The original design has been modified to accept the i3 Y mount and raised to fit into an i3's space. It has holes in the frame for zip ties to hold down the LMU88 bearings and the necessary attachments to stop the bearings slipping.
The part has now been updated to be 10mm thick, instead of the 5mm as bases were failing over long use. You can now use 3 point stabilisation, and it also has a mount for cable chains.
Requirements
It will require 16x25mm M3 screws and nuts to attach the legs to the body, washers are recommended. Also, 3 or 4x50mm M3 screws with nuts, washers and springs to keep the heated bed off the base. A sheet of cardboard and an air gap between the heater and the carriage is essential as it will protect the carriage from the heat radiating from the heated bed.
And as with all parts for your 3D printer, ABS is the recommended material to construct this part.
You will need 2 pairs of legs and one body to every base. Bearing mounts are optional.
PS.
I have since moved on from using a plastic bed carriage and I don't plan on further development of this project. As it may help those on a shoestring budget get their first printer up and running, I'll keep this part posted and available for those interested in experimenting.
Similar models
grabcad
free
Heated Bed Support for a 3D Printer
...the spring can easlily be obtained via aliexpress or ebay. the heated bed can now be adjusted from the top by means of the screw.
thingiverse
free
Micromake Heated Bed Mount by pyjamasam
... issues running it at 60c to print more pla. printing in abs might be a better option if you plan on running the bed up to 100c.
thingiverse
free
i3 Rework 2 LM8UU Bearing X-Carriage by MeisnerX
...2 --
now includes revision that fits m3 size bolts. snug fit so may require drilling out depending on how your printer prints it.
thingiverse
free
Tevo Tarantula Bed Mount
...dard tarantula, i used a different printer to print this.
i recommend not using pla, the heat from the bed might warp the part.
thingiverse
free
Y Carriage Bearing Mounts for Folger Tech 2020 i3 by acasto
...ulation between my heated bed and carriage plate though, so you may want to test for your setup or just play it safe and use abs.
thingiverse
free
Hictop Prusa I3 MK8 Y axis Front w/belt bearing carriage by idkmsu
...t of the heated bed. my first design was printed in abs with 20% infill and it broke. i suggest using abs at at least 50% infill.
thingiverse
free
Prusa i3 heat bed nut holder by J_Seppala
...int out nicely and the nut should have a snug fit to hold the nut in place. i printed these with pla and for me they work nicely.
thingiverse
free
LM8UU Bearing Blocks for FolgerTech 2020 PRUSA I3 by Djkingsley
...lts that hold the bearing blocks to the bed.
this bearing block mounts to the existing bed plate holes as supplied by folgertech.
thingiverse
free
Printed y-carriage for prusa i3, fits 200x200 by Nilz
...
i intend to integrate the bearing holders into the carriage to reduce the height. i also want to make attaching the belt easier.
thingiverse
free
Heat Bed M3 Nut Fix by yucelll
...heat bed m3 nut fix by yucelll
thingiverse
for heat bed m3 nut fix
prusa i3
Zappyguy111
thingiverse
free
Belt tightener by Zappyguy111
... tightener for t2 belt. something i whipped together when i found the teeth didn't line up to form a tight fit for my printer
thingiverse
free
OpenSCAD NEMA 17's by Zappyguy111
...a 17's by zappyguy111
thingiverse
just a quick script for generating nema 17 motors in open scad
edited with examples of use
thingiverse
free
BladesBase_x14-Remixed for existing fitting by Zappyguy111
...m inner diameter and 3 screws to mount, this is a modification based off the bladesbase_x14 model to make it fit in this housing.
thingiverse
free
Tiny water jug by Zappyguy111
...to get a water tight seal, and it is designed for spiral vase printing.
i had great success with 0.5mm extruder and 0.2mm thread.
thingiverse
free
Minimalistic spool mount by Zappyguy111
... must get for first time tinkerers.
these have been modified from my custom printer (as displayed) for general use.
have fun!
thingiverse
free
Curtain Bangle by Zappyguy111
...n't latching shut, try lining the hinge and latch length ways with the curtain, the outwards force helps hold the latch shut.
thingiverse
free
Card box with clip by Zappyguy111
... am currently printing it to test and hopefully, it will work first go. i'll update this as necessary.
designed using onshape
thingiverse
free
Keychain containers by Zappyguy111
...u can always set the "xy size compensation" in slic3r to thin the model down to give a little extra tolerance.
zap out!
thingiverse
free
Bed calibration tile by Zappyguy111
...this case).
smooth finish/small sharp ridges = perfect!
m3 screws: 1/4 turn = 150µm.
others: check the pitch.
good luck!
zap out!
I3
3d_export
$10
suv i3
...suv i3
3dexport
suv i3 2013 series
3d_ocean
$89
BMW i3 2012
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
cg_studio
$99
BMW i3 20143d model
...
cgstudio
.3ds .c4d .fbx .lwo .max .obj - bmw i3 2014 3d model, royalty free license available, instant download after purchase.
cg_studio
$99
BMW i3 20123d model
...tudio
.3ds .c4d .fbx .lwo .max .mb .obj - bmw i3 2012 3d model, royalty free license available, instant download after purchase.
cg_studio
$99
BMW i3 20143d model
...tudio
.3ds .c4d .fbx .lwo .max .mb .obj - bmw i3 2014 3d model, royalty free license available, instant download after purchase.
humster3d
$75
3D model of BMW i3 2014
...
buy a detailed 3d model of bmw i3 2014 in various file formats. all our 3d models were created maximally close to the original.
humster3d
$40
3D model of Kitchen Set I3
...uy a detailed 3d model of kitchen set i3 in various file formats. all our 3d models were created maximally close to the original.
3d_ocean
$30
Kitchen set i3
...ensils oven plates shelves sink table ware
kitchen set i3 include 3d models: cooker, oven, sink, cupboards, table, chair, plates.
3d_ocean
$89
BMW i3 2014
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
cg_studio
$99
BMW i3 Concept 20113d model
...i3
.3ds .c4d .fbx .lwo .max .obj - bmw i3 concept 2011 3d model, royalty free license available, instant download after purchase.
Printable
turbosquid
$5
printable giraffe
...uid
royalty free 3d model printable giraffe for download as on turbosquid: 3d models for games, architecture, videos. (1504825)
turbosquid
$49
Longhorn Printable
...
royalty free 3d model longhorn printable for download as stl on turbosquid: 3d models for games, architecture, videos. (1712930)
3d_export
$2
printable audi car
...printable audi car
3dexport
printable audi car
turbosquid
$40
Fox printable
...lty free 3d model fox printable for download as blend and stl on turbosquid: 3d models for games, architecture, videos. (1507558)
turbosquid
$23
Printable Statue
...ty free 3d model printable statue for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1415137)
turbosquid
$3
Ear Printable
...yalty free 3d model ear printable for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1671689)
turbosquid
$1
Printable Hook
...
royalty free 3d model 3d printable hook for download as stl on turbosquid: 3d models for games, architecture, videos. (1413683)
turbosquid
$1
heart printable
...y free 3d model heart printable for download as stl and sldpr on turbosquid: 3d models for games, architecture, videos. (1209566)
turbosquid
$30
Printable support
... model 3d printable support for download as max, 3ds, and stl on turbosquid: 3d models for games, architecture, videos. (1689342)
turbosquid
$24
Printable Dolphin
...el printable dolphin for download as , dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1602353)
Base
archibase_planet
free
Base
...base
archibase planet
base column column base
base 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column base column
base 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 4 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column base column
base 6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
foundation base
column base ionic - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
foundation base
column base tuscan - 3d model (*.gsm+*.3ds) for interior 3d visualization.
design_connected
$18
Base
...base
designconnected
tom dixon base computer generated 3d model. designed by dixon, tom.