Thingiverse
printable fpv tricopter v1 by hc625ma
by Thingiverse
Last crawled date: 3 years ago
Tricopter with wheeled undercarriage that allows running take-offs and landings. This machine had been created to be as cheap in construction and flying and repairable as possible, yet represent flight dynamics somewhat similar to a full-scale helicopter (so very simple flight controller that provides only minimal stabilization, and wooden booms that ocassionaly warp due to humidity, adding a bit of random drift that has to be compensated by a pilot). Tail rotor is lifted to protect it from contact with ground and obstacles while on the ground, and also for keeping it out of ground effect on landing, allowing very smooth tail-first touchdowns.
Horizontal bar on the video is a visual reference, showing frame bank angle relative to terrain and camera, as camera is not mounted rigidly and can tilt a bit itself.
Flight time is around 6-7 minutes with 2200mah 3s battery and 10-12 minutes with 4200mah, though machine becomes heavy with its weight so flying on a windy day can be challenging, especially when turning into tailwind or trying a high hover.
Flight video:
https://www.youtube.com/watch?v=SC4wt_plVMo
Models are designed with sketchup for 10mm wooden booms.
On the first picture this is prototype version without vibration dampening camera mount, that is shown on other pictures. Flight video is captured with cameras mount installed.
------ update:
Since summer had come to its end, and the machine is still in one piece (though it had flown every weekend at least for an hour), i've decided to remove "work in progress" sign. It flies fine, especially with 4200 battery (it can possibly handle larger ones as well). I've pushed it to the limit from time to time, had a very rough landing once due to pilot error (chassis absorbed all impact energy with only minor damage caused to one of wheels, and there was no damage at all dealt to other parts of the machine) so it seems it's pretty much safe to fly. The only problem is the lack of avionics. So, maybe it is a good idea to replace KK 5.5 board with multiwii.
------ update 2:
The winter is coming, along with snow, rains, humidity and other stuff it's best to avoid contact with. So, there should be an all-weather version to handle it. Why not, just put electronics into sealed containers, so it will survive a crash landing in deep snow. This time i will also use aluminium booms, cause wood will most likely bend randomly in such conditions.
Stay tuned.
Horizontal bar on the video is a visual reference, showing frame bank angle relative to terrain and camera, as camera is not mounted rigidly and can tilt a bit itself.
Flight time is around 6-7 minutes with 2200mah 3s battery and 10-12 minutes with 4200mah, though machine becomes heavy with its weight so flying on a windy day can be challenging, especially when turning into tailwind or trying a high hover.
Flight video:
https://www.youtube.com/watch?v=SC4wt_plVMo
Models are designed with sketchup for 10mm wooden booms.
On the first picture this is prototype version without vibration dampening camera mount, that is shown on other pictures. Flight video is captured with cameras mount installed.
------ update:
Since summer had come to its end, and the machine is still in one piece (though it had flown every weekend at least for an hour), i've decided to remove "work in progress" sign. It flies fine, especially with 4200 battery (it can possibly handle larger ones as well). I've pushed it to the limit from time to time, had a very rough landing once due to pilot error (chassis absorbed all impact energy with only minor damage caused to one of wheels, and there was no damage at all dealt to other parts of the machine) so it seems it's pretty much safe to fly. The only problem is the lack of avionics. So, maybe it is a good idea to replace KK 5.5 board with multiwii.
------ update 2:
The winter is coming, along with snow, rains, humidity and other stuff it's best to avoid contact with. So, there should be an all-weather version to handle it. Why not, just put electronics into sealed containers, so it will survive a crash landing in deep snow. This time i will also use aluminium booms, cause wood will most likely bend randomly in such conditions.
Stay tuned.
Similar models
thingiverse
free
Winter landing gear for RCExplorer V3 (10mm booms) by Motorpixiegimbals
...e boom (preferably place esc on top or front of boom to prevent risk of damage on impact) some tests: http://youtu.be/bwwds6jtmmy
thingiverse
free
Multirotor motor mount V2 NTM by Kezat
...flights monitor the temperature of the motors. i have about 20+ flights with the extra weight of fpv gear and have had no issues.
thingiverse
free
Tricopter tail pivot V2 by Kezat
...flights monitor the temperature of the motors. i have about 20+ flights with the extra weight of fpv gear and have had no issues.
grabcad
free
Tricopter / Quadcopter Motor mounts
...opter or quadcopter, this design matches the tricopter tail mount.
again, 18x12 boom arms (dont like the flex of 12x12 or 10x10)
thingiverse
free
Mini Talon rear landing gear by celiktse
... piece of stick, wire, or carbon rod as seen in the picture underside of tail. otherwise, you will damage your tail very shortly.
grabcad
free
Tricopter MKII
... video display. the range of the drone was about 1.5 miles and had a flight time of about 20 minutes on a 4000 mah lipo battery.
thingiverse
free
Tricopter Motor Pivot by Gundy21
...tricopter motor pivot by gundy21
thingiverse
basic tricopter tail boom motor pivot for flitetest tricopter build
thingiverse
free
T280 3D Printed Mini FPV Tricopter by Filatech
... carbon tube
tail mechanism: direct drive micro servo
pilot camera damp mount
hd camera damped/inclined adjustable mount
enjoy :)
thingiverse
free
HJ-Y3 Tricopter battery holder by Dvogonen
...ps.
the battery plate is held in place by the straps themselves and does not require any drilling or modification of the frame.
thingiverse
free
Stevens AeroModel SHAFT Parts by Martinrome
...ss. i was able to remove the nose weight. running an emax 1250kv, 2200 3 cell battery. flies like a dream now and lands smoothly.
Hc625Ma
thingiverse
free
Modified direct drive extruder by hc625ma
...er files included). the original model is not mine, the idler was re-created from stl files. 623zz bearing is used for the idler.
thingiverse
free
Simchair MKIII I2C controller by hc625ma
...quently, please use the latest.
you can always find it in the simchair_i2c repo on github:https://github.com/hc625ma/simchair_i2c
thingiverse
free
1:32 OpenRailway EMD SW1500 Union Pacific No. 1142 stencils by hc625ma
...ingiverse.com/thing:916416) union pacific no. 1142 stencils, print with 0.1mm layer and use painters tape to fix it on the model!
thingiverse
free
Simchair MKIII IKEA GUNDE chair frame parts by hc625ma
... make it more comfortable (yet still compact!). it should also fix the problem with a weak plastic back breaking after some time.
thingiverse
free
Rc scaler printable trailer ball link by hc625ma
...ook of your truck.
the trailer on the pic is this one:
https://www.thingiverse.com/thing:3543490
and it's awesome! have fun!
thingiverse
free
Xbox 360 gamepad stick extenders, 10,20 and 30mm by hc625ma
...t sims, i'd still recommend trying the simchair (https://www.thingiverse.com/thing:1578566). source files are also included.
thingiverse
free
Simchair MKIII I2C B8 flight stick by hc625ma
... liking, cut the aluminum pipe accordingly, then route an ethernet cable through the pipe and crimp it as a usual ethernet cable.
thingiverse
free
Simchair MKIII anti-torque pedals by hc625ma
...nd ethernet socket pin 2
addr - sda (bus address 0x4a)
a0 - ss495a signal
scl - ethernet socket pin 3
sda - ethernet socket pin 4
thingiverse
free
Y tricopter v5 by hc625ma
...за соединительная м4, http://www.bolt.ru/catalog/mebelnaya_furnitura/styazhki_bolty_vinty/gilza_soedinitelnaya_gajka.html?limit=0
thingiverse
free
Simchair MKIII I2C single engine collective lever by hc625ma
...please re-download i2c_connector_cover.stl
uh-1 collective head development snapshot is available at my site: http://hc625ma.org/
Tricopter
3d_export
$5
Moon copter 3D Model
...model 3dexport spaceship mooncopter tricopter aircraft drone helicopter robot rctricopter moon copter 3d model manu.kvs16051 93671...
3dbaza
$7
Tricopter (346642)
...tricopter (346642)
3dbaza
tricopter 3d model
thingiverse
free
tricopter parts by miketulen123
...tricopter parts by miketulen123
thingiverse
tricopter parts
thingiverse
free
Tricopter by outcastrc
...tricopter by outcastrc
thingiverse
tricopter design
uses 1/2" wood spars, and assorted 3mm hardware.
thingiverse
free
Delta Tricopter by zdar
...delta tricopter by zdar
thingiverse
a delta style tricopter.
thingiverse
free
Tricopter Prototype by brentd
...tricopter prototype by brentd
thingiverse
mini tricopter prototype
thingiverse
free
Tricopter Yaw by 2Mars
...mm rods, suitable as a tail joint.
(based on tricopter rcexplorer.se http://rcexplorer.se/projects/2011/09/the-tricopter-v2-5/)
thingiverse
free
tricopter base by gpatel522
...tricopter base by gpatel522
thingiverse
tricopter base for anyone to use. no commercial use.
thingiverse
free
Tricopter V2.5 by Crazyinventor
...tricopter v2.5 by crazyinventor
thingiverse
these are the printed parts that go to my tricopter v2.5.
thingiverse
free
Tricopter Hook by Lowfiero
...tricopter hook by lowfiero
thingiverse
just a quick wall hook for my batbone tricopter.
Fpv
turbosquid
$1
FPV VTX Antenna
...e 3d model fpv vtx antenna for download as obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1230317)
3d_export
$9
Fpv logo 3D Model
...onogram vehicle part of auto transport 3d model logo emblem detailed high quality badge
fpv logo 3d model rmodeler 59628 3dexport
3d_export
$8
dji fpv battery slot holder
...er for 3 dji fpv batteries. holds perfectly without shaking. need 1 m3 countersunk head bolt. need to print 6 pin, 1 case, 1 cap.
3d_export
$10
fpv camera hd 700tvl
...aterials are logically named<br>the main format is in 3ds max 2009.<br>satisfcation garranteed..<br>thank you !
thingiverse
free
FpV Mount (SOPORTE FPV) by elborjas1987
...fpv mount (soporte fpv) by elborjas1987
thingiverse
this is a fpv mount with the same holes of naza base.
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
FPV DRONE ROOSTER DJI FPV PART
...fpv drone rooster dji fpv part
thingiverse
fpv drone rooster dji fpv install part
thingiverse
free
FPV monitor
...tml?rmmds=myorder&cur_warehouse=cn
link for download : https://cults3d.com/fr/mod%c3%a8le-3d/divers/fpv-monitor-ecran-fpv-faf
thingiverse
free
FPV receiver mount for FPV display by petrex
...eceiver mount for fpv display by petrex
thingiverse
aomway receiver mount for field view 777 fpv monitor. with small cable tray.
V1
turbosquid
$35
v1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
street tree v1
...street tree v1
3dexport
street tree v1
3d_export
$5
potato v1
...potato v1
3dexport
turbosquid
$20
Kitchen V1
...bosquid
royalty free 3d model kitchen v1 for download as max on turbosquid: 3d models for games, architecture, videos. (1153622)
turbosquid
$12
sofa v1
...turbosquid
royalty free 3d model sofa v1 for download as max on turbosquid: 3d models for games, architecture, videos. (1283267)
turbosquid
$3
Chair V1
...urbosquid
royalty free 3d model chair v1 for download as fbx on turbosquid: 3d models for games, architecture, videos. (1486093)
turbosquid
$15
Cupboard v1
...royalty free 3d model cupboard v1 for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1444568)
3d_export
$5
tram v1
...tram v1
3dexport
3d_export
$8
lumber car v1
...lumber car v1
3dexport
lumber car v1 printable, low poly model.
turbosquid
$20
DELTALIGHT v1
...free 3d model deltalight v1 for download as max, max, and obj on turbosquid: 3d models for games, architecture, videos. (1630928)
Printable
turbosquid
$5
printable giraffe
...uid
royalty free 3d model printable giraffe for download as on turbosquid: 3d models for games, architecture, videos. (1504825)
turbosquid
$49
Longhorn Printable
...
royalty free 3d model longhorn printable for download as stl on turbosquid: 3d models for games, architecture, videos. (1712930)
3d_export
$2
printable audi car
...printable audi car
3dexport
printable audi car
turbosquid
$40
Fox printable
...lty free 3d model fox printable for download as blend and stl on turbosquid: 3d models for games, architecture, videos. (1507558)
turbosquid
$23
Printable Statue
...ty free 3d model printable statue for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1415137)
turbosquid
$3
Ear Printable
...yalty free 3d model ear printable for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1671689)
turbosquid
$1
heart printable
...y free 3d model heart printable for download as stl and sldpr on turbosquid: 3d models for games, architecture, videos. (1209566)
turbosquid
$1
Printable Hook
...
royalty free 3d model 3d printable hook for download as stl on turbosquid: 3d models for games, architecture, videos. (1413683)
turbosquid
$30
Printable support
... model 3d printable support for download as max, 3ds, and stl on turbosquid: 3d models for games, architecture, videos. (1689342)
turbosquid
$24
Printable Dolphin
...el printable dolphin for download as , dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1602353)