PPE Acetate Shield Visor 10 inch x 12 inch (Standard and XL Size) by Emmendez

Last crawled date: 4 years ago

146mm Internal width is the standard size.
166mm Internal width is the XL size.
If you need sizes between it is easy to scale.
Closed the top per our local medical team suggestion. (Flat side goes up)
Added hooks to the ears with recesses to make round elastic cord lay flush above ears. Can use elastic cord or elastic band.
Using EVA foam on the brim for forehead cushion.
Using 10 inch wide x 12 inch long acetate.
Pull the corners a little to change the angle of the shield, can angle out or in to the chin.
Tested at local hospital.
Printed in PETG because they are being disinfected (effervescent tablets) and reused at the hospital, if printed in PLA it is a one time use depending on disinfection process used at the hospital you are donating to. A reference cart is included in the photos.
Assembly: https://www.youtube.com/watch?v=xsc1RIfQK8s&feature=youtu.be
Original face shield:https://www.thingiverse.com/thing:4233193