Power-Up Mushroom by MarioCdeS

Last crawled date: 3 years, 1 month ago

This is a work-in-progress. It was modeled very quickly, for my own personal need, and is not "production" quality. The assembly, in particular, is a little fiddly. You will require a mallet and a short dowel to push the individual coloured pieces into the base. You will also require an adhesive to adhere the front-most pieces of the mushroom-cap to the base. An emery board will also be useful, to smooth out edges on the blocks. You will require the following pieces to complete the mushroom:
1 x base_black.stl (black)
1 x face_white.stl (white)
1 x cap_white.stl (white)
1 x cap_red.stl (red)
6 x 2x1.stl (white)
6 x 3x1.stl (white)
2 x 5x1.stl (white)
10 x 2x1.stl (red)
1 x 4x1.stl (red)
Use the image with grid, in the gallery, as a reference for placement of the pieces.