power cord adhesive tape machine

Last crawled date: 1 year, 10 months ago

power cord adhesive tape machine
this equipment is suitable for industrial wire, fpc flat wire, 0.3-0.8mm wire diameter, all kinds of household industrial wire adhesive label. this equipment is a kind of wire gluing and labeling processing equipment: the equipment is mainly used for cutting and pasting wires, and the equipment is mainly used for pasting small core wires. the adhesive tape mechanism is two groups of adhesive pasting machines with upper and lower layers. the incoming wire can also arrange up to 50 wires. the number of wires can be automatically selected and arranged, and the size of adhesive tape can also be selected. the wire enters the gluer the adhesive pulling mechanism pulls out and cuts the adhesive tape and then pastes it onto the wire. the upper and lower sides are labeled together to bind the wire together. the structure of the core adhesive pulling material is a stepping motor, and the moving structure is complex. the switchboard adopts the configuration of two servo motors, one stepper motor and 15 cylinders. this is a sophisticated equipment with complex structure. the head and label are vacuum adsorption type the position and length of the glue can be adjusted according to the requirements. the adjustable range is relatively large, and the wire feeding structure is also more ingenious. due to the complicated action of the equipment, there are more cylinders. after downloading, you can analyze and study it carefully. you can learn a lot. here, i will not introduce other details. the whole structure and working principle of the above equipment. 2、 the main structure of the equipment is as follows: 1. manipulator: gluing press load transfer manipulator is divided into x-axis and z-axis, with accurate positioning. 2. gluing machine: the principle of the upper and lower glue feeding mechanism is similar to that of the labeling machine. the cutting precision length can be controlled within 0.05, and the speed can reach about 2000 pieces of adhesive tape per small, and it has the function of shortage alarm. 3. wire feeding position: the structure of wire feeding position is ingenious, which can be pasted with tape and label paper of 50 wires. 4. wire transfer load: the length and displacement structure of the wire adopt the way of stepping motor and cylinder clamping, and the efficiency is relatively high. the above is the function and principle of this equipment, and other more ingenious design structure. you can have time to study and study after downloading. in short, this is a very good set of wire tape machine drawings. thank you for your study. main technical parameters: category specification parameters overall dimensions: 850 * 720 * 1700mm (l * w * h) input voltage: ac-220v50 hz or ac-380v 50 hz optional machine maximum power: 1.1kw (at 220 v) input air source pressure: 0.4-0.6 mpa gas consumption: 1.5 l / min production efficiency (c / t): ≤ 4.0 s / one equipment utilization rate: ≥ 95% processing method: automatic line feeding, motion resolution of manipulator: 0.005 mm, repeated positioning accuracy of manipulator: ≤ ± 0.01 mm, and material change mode: manual material change