Pool Step by maiknms

...pool vacuum. you can modify the diameter of the tapered end in the.scad file to fit whatever size vacuum hose you're using.

...direction of the water jet which flows into the pool. drill the original intex pool outlet to 30mm. i used a step drill for this.

...ing to replace the whole main housing. this part is designed as friction fit to 'clip' onto the main body (vacuum tubes).

...hat i recommend to print them without any support by rotating them as shown on the last picture, it also makes the part sturdier.

...on to rail of pool. slide mounting straps from ladders over bolts through corresponding holes in straps. spin wing nut onto bolt.

... that library makes the threads in the cap, so be sure to download it if you want to tinker with the openscad source for the cap.

...eter piece. these can easily be combined with my 14 piece unique lava pieces found here.https://www.thingiverse.com/thing:2722290

....stl printolympic_pool_skimmer_shutter-with_logo.stl to know how set your gcode, see https://www.youtube.com/watch?v=d7fit5vqlsg.

...strength, print at at least 50% infill). coat after printing with epoxy or other clear coat to help keep it clean and seal pores.

...intex pool skimmer by pascal98 thingiverse for intex pools (frame pool ultra )

...rgb led 5050 gehäuse zum vergießen by maiknms thingiverse dies ist ein gehäuse für 6 rgb led´s 5050 zum vergießen.

...pool by averyross thingiverse pool

...pool by evannator989 thingiverse a pool that can have real water in it

...enturieffekt bekommt man mehr wasserbewegung im pool. habs in pla mit 0,2mm layer gedruckt. da unter wasser bisher keine probleme

...pool adapter by ezechias thingiverse pool adapter

...birds pool by sergiofpv thingiverse birds pool

...playmobil pool by migfue thingiverse playmobil pool

...lid for the pool by rustam thingiverse lid for the pool

...pool stairs by eliane thingiverse pool stairs

...modern house with pool thingiverse this is a nice modern house with a pool

...no step on snek thingiverse no step on snek

...steps by ryespy thingiverse steps by mrcainscience [created with 3dtin]

...step-down thingiverse obudowa do step-down 24v-12v

...dule housing by gee_bee thingiverse a housing for common step-down or step-up modules. (see housing dimensions on sketch image.)

...tor mount for ender 3 pro thingiverse step by step motor mount for ender 3 pro extruder -200c bed -45c estimated time -11minutes

...step gauge by afkidwe thingiverse step gauge

...to make the steps bigger this model was also my first sculptor that i used the acetone vapor smoothing using abs to print with ..

...6" steps by amsstem79 thingiverse 6" steps

... then at the second step put the next screws in the 2nd one, and so on. step back from box 16 to 1 when reassembling your device.