platform and pole by Leitz

...designed for a 20-25mm pole diameter, with room to insert thin rubber tubing between the mount and the pole to increase friction.

...com/thing:2788387), just splitting the base/pole from the top to make it easier to print without nearly as much support required.

...he middle platform of the robot. additional material is needed to mount the poles and mounts to the turtlebot: m4 nuts and screws

...) 4 smaller holes around center are 3mm and can be used with bolts or pegs to provide things mounted to it purchase/extra support

...le by 113% for s, ok as is (i.e., 100%) for ho, scale by 65% to 70% for n, scale by 40% to 50% for z, scale by 40% to 45%

...o hexagonal hole also. insert the cover with the nut into the bottom of body option: attach a rubber sheet to the top of the body

...les but atm its just the one. please let me know if you like it, i haven't had the chance to print one out yet but will soon.

...hat pole thingiverse hat pole put hat on pole

...m in diameter, the largest i can print. the second part supports the dish on the pole - the cylinder in the dish is a bit flimsy.

...pole plug by rcoolen thingiverse pole plug for garden fence poles

...leitz stop by noboby223 thingiverse leitz stop

...foot for leitz aristoplan by vibestrakt thingiverse foot for leitz aristoplan

...leitz a4 paper by arturo2511 thingiverse it's a a4 paper size ajuster for leitz.

...leitz lollipop 35mm by vibestrakt thingiverse simple leitz lollipop 35mm to use your own filters

...leitz variophot side cover by vibestrakt thingiverse cover for side camera hole on leitz variophot

...//////////////////////////////////////////////////////// please also visit my 3dhub @ https://www.3dhubs.com/den-haag/hubs/nick-0

...leitz focomat iic - 6x7 frame by ackeback thingiverse 6x7 frame for leitz focomat iic enlarger.

...paper guide for leitz 5008 hole puncher thingiverse a replacement for the paper guide on a leitz 5008 hole puncher.

...er for leitz sm-lux microscope by cs2000 thingiverse this is an analyzer for a leitz sm-lux microscope. the thread is m22x0.8mm.

...hat pole thingiverse hat pole put hat on pole

...ghost pole thingiverse ghost pole

...pole vaulter thingiverse pole vaulter keychain. take off position.

...r adding extra poles to your tent to stop walls sucking in. the fit nice and snug on 16mm poles. and have a 13mm hole for dowels

...pole plug by rcoolen thingiverse pole plug for garden fence poles

...pole clapm by oli114fr thingiverse pole clamp

...barberb pole by fegv2 thingiverse a barber pole

...sign is a knock-off of the beta stick and similar designs on thingiverse. made to fit on us standard painter poles or broom poles

...light pole by dillbill266 thingiverse it is a light pole for street

...platform by jlip36 thingiverse platform

...rock platform thingiverse floating rock platform (wip)

...platform by sobebucks thingiverse this is to add a third platform for a dji flamewheel kit.

...platform by broadzilla00 thingiverse needed an extention/platform to help hold my auto fish feeder. work in progress.

...platform rails thingiverse 1 inch rail segments that can be glued down to catwalks and platforms for industrial style terrain.

...platform test by aking99999 thingiverse platform test.

...16x16 platform by minimicrofpv thingiverse small 16x16 platform for things

...platforms for rodents by jagang thingiverse two platforms for rodent cage.

...u want us to upgrade anything :). if you want to see it running on a video, you can go to our instagram profile @celda3d. enjoy!!