Thingiverse
PiPlayer by bobblejot
by Thingiverse
Last crawled date: 3 years ago
Update 24122017
Finally got around to uploading the files but word of warning i haven't tested any of the parts yet so please print at your own risk, you have been warned :-)
Raspberry Pi powered retro games emulator, running EmulationStaion.
The PiPlayer STL File is NOT for printing it is just a complete model of the unit.
The printable files will be made available once i have finished printing them and tried them out for size, i might need to make a few adjustments depending on the final prints.
This is my first 3d model as well as my first time doing 3d printing so your patience is appreciated :)
This project came about as i just finished building my printer 3 weeks ago and needed something to print, i had a Pi and was looking for ideas when i stumbled across the PiGrrl and Other designs from Adafruit as well as the Pi Boy Portable and Super Game PiSP.
After a lot of searching i decided there really wasn't any single design that covered all my needs ( and wants ) so decided to design my own.
So what is it i had in mind?
Most Importantly otherwise i couldn't do it, it had to fit on my printer. Only problem is it doesn't :) so the back and front are split into 3 pieces, left grip, right grip and center. This allows me to print on my printer that has a 225mm print bed, if your lucky enough to have a print bed 280mm or over they can be printed as on piece.
5 inch HDMI screen ( able to use Pi Graphics Hardware acceleration ).
Raspberry Pi 2 as no other design seemed to use one yet.
Enough controls to cover any system.
The use of tactile switches.
large battery capacity 5400mAh lipo.
An easy to access and replace battery.
Soft on/off functionality
Minimal use of screws or at least hidden.
A comfortable design to hold while playing, only a few millimeters thicker than a classic wii controller..
Accessible USB ports and headphone socket.
New additions:
A system indicator and low battery indicator.
Modified supports for Pi and HDMI Display.
Grip and Body Interlocks to make assembly easier.
I will keep updating and add to this as i go along :)
To The Materials:
PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA+
Raspberry Pi 2 Model B Desktop (Quad Core CPU 900 MHz, 1 GB RAM, Linux)
Kingston Technology 32 GB microSDHC Class 10 Flash Card with SD card adapter
Stereo 3.7W Class D Audio Amplifier - MAX98306
5 inch HDMI LCD 800×480 High Resolution for Raspberry Pi 2 Model B / Raspberry Pi Model B / B+ / A+
Teensy 2.0 USB AVR Development Board For Arduino ISP ATMEGA32U4
SODIAL(R) Classic Controller for Nintendo Wii
Edimax EW-7811UN 150Mbps Wireless Nano USB Adapter
All the above were purchased from Amazon UK mainly because im lazy theres one click checkout and it arrives next day :) Links for Amazon US below.
PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA+
Raspberry Pi 2 Model B Desktop (Quad Core CPU 900 MHz, 1 GB RAM, Linux)
Kingston Technology 32 GB microSDHC Class 10 Flash Card with SD card adapter
Stereo 3.7W Class D Audio Amplifier - MAX98306
5 inch HDMI LCD 800×480 High Resolution for Raspberry Pi 2 Model B / Raspberry Pi Model B / B+ / A+
Teensy 2.0 USB AVR Development Board For Arduino ISP ATMEGA32U4
SODIAL(R) Classic Controller for Nintendo Wii
Edimax EW-7811UN 150Mbps Wireless Nano USB Adapter
Additional Items:
PowerBlock by petRockBlock
3pcs Round 20mm 8ohm 0.5w Speaker
Finally got around to uploading the files but word of warning i haven't tested any of the parts yet so please print at your own risk, you have been warned :-)
Raspberry Pi powered retro games emulator, running EmulationStaion.
The PiPlayer STL File is NOT for printing it is just a complete model of the unit.
The printable files will be made available once i have finished printing them and tried them out for size, i might need to make a few adjustments depending on the final prints.
This is my first 3d model as well as my first time doing 3d printing so your patience is appreciated :)
This project came about as i just finished building my printer 3 weeks ago and needed something to print, i had a Pi and was looking for ideas when i stumbled across the PiGrrl and Other designs from Adafruit as well as the Pi Boy Portable and Super Game PiSP.
After a lot of searching i decided there really wasn't any single design that covered all my needs ( and wants ) so decided to design my own.
So what is it i had in mind?
Most Importantly otherwise i couldn't do it, it had to fit on my printer. Only problem is it doesn't :) so the back and front are split into 3 pieces, left grip, right grip and center. This allows me to print on my printer that has a 225mm print bed, if your lucky enough to have a print bed 280mm or over they can be printed as on piece.
5 inch HDMI screen ( able to use Pi Graphics Hardware acceleration ).
Raspberry Pi 2 as no other design seemed to use one yet.
Enough controls to cover any system.
The use of tactile switches.
large battery capacity 5400mAh lipo.
An easy to access and replace battery.
Soft on/off functionality
Minimal use of screws or at least hidden.
A comfortable design to hold while playing, only a few millimeters thicker than a classic wii controller..
Accessible USB ports and headphone socket.
New additions:
A system indicator and low battery indicator.
Modified supports for Pi and HDMI Display.
Grip and Body Interlocks to make assembly easier.
I will keep updating and add to this as i go along :)
To The Materials:
PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA+
Raspberry Pi 2 Model B Desktop (Quad Core CPU 900 MHz, 1 GB RAM, Linux)
Kingston Technology 32 GB microSDHC Class 10 Flash Card with SD card adapter
Stereo 3.7W Class D Audio Amplifier - MAX98306
5 inch HDMI LCD 800×480 High Resolution for Raspberry Pi 2 Model B / Raspberry Pi Model B / B+ / A+
Teensy 2.0 USB AVR Development Board For Arduino ISP ATMEGA32U4
SODIAL(R) Classic Controller for Nintendo Wii
Edimax EW-7811UN 150Mbps Wireless Nano USB Adapter
All the above were purchased from Amazon UK mainly because im lazy theres one click checkout and it arrives next day :) Links for Amazon US below.
PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA+
Raspberry Pi 2 Model B Desktop (Quad Core CPU 900 MHz, 1 GB RAM, Linux)
Kingston Technology 32 GB microSDHC Class 10 Flash Card with SD card adapter
Stereo 3.7W Class D Audio Amplifier - MAX98306
5 inch HDMI LCD 800×480 High Resolution for Raspberry Pi 2 Model B / Raspberry Pi Model B / B+ / A+
Teensy 2.0 USB AVR Development Board For Arduino ISP ATMEGA32U4
SODIAL(R) Classic Controller for Nintendo Wii
Edimax EW-7811UN 150Mbps Wireless Nano USB Adapter
Additional Items:
PowerBlock by petRockBlock
3pcs Round 20mm 8ohm 0.5w Speaker
Similar models
thingiverse
free
Wifi Speaker with Raspberry Pi B+ and Harman / Kardon speaker by Kaworru
...i have modified the existing raspberry pi b+ case, because i missed ventilator slots and want to directly mount my speaker to it.
3dwarehouse
free
Adafruit PowerBoost Shield
...adafruit powerboost shield
3dwarehouse
adafruit powerboost shield 5v @ 500ma+ output 500ma lipo charger 3.2v low battery led
grabcad
free
USB Wifi Adapter With Antenna
...usb wifi adapter with antenna
grabcad
150mbps usb wifi wireless adapter 150m lan w/antenna raspberry + 2dbi antenna
3dwarehouse
free
Raspberry Pi
...house
model b with wifi. already start production early january 2012 #board #circuit #electronic #hdmi #htpc #pi #raspberry #usb
grabcad
free
HDMI Adapter
...hdmi adapter
grabcad
hdmi to micro hdmi for raspberry pi board to monitor adapter
thingiverse
free
Web Radio by GottderDrachen
...
software raspbmc (http://www.raspbmc.com/wiki/user/windows-installation/)
p.s hab in nachhinein noch lüftungslöcher gebohrt
grabcad
free
Raspberry Pi B+ Case with Fan Mounting Holes
...g machines, where as the flush logo top prints out just fine.
i hope that you enjoy this model. i look forward to your feedback.
thingiverse
free
7inch screen case for Raspberry pi HDMI Touch Screen by Lammesky
...ike, before you print this..
please send me some money, if you have plenty :-)
paypal.me/lammesky
happy printing and good luck..!
grabcad
free
Adapter Wifi USB
...adapter wifi usb
grabcad
adapter wifi usb that i used in raspberry pi.
thingiverse
free
Raspberry Pi 1 Model B case by matt448
...sd card and ethernet are accessible. the screw holes in the cover have to be drilled out. i use mine to hold my octoprint server.
Bobblejot
thingiverse
free
Lampshade Reducer Ring by bobblejot
... two of which had the reducer missing for the smaller lamp holders. the internal diameter is 30mm and the outer diameter is 44mm.
thingiverse
free
Zanussi Washing Machine Filter Cover by bobblejot
...lejot website
bobblejot github
bobblejot twitter
designed this to replace the broken cover on my mothers zanussi washing machine.
thingiverse
free
Tie Wrap Twist Clip for 2020 Extrusion by bobblejot
... cable ties.
bobblejot website
bobblejot github
bobblejot twitter
a small twist in cable tie clip modelled after the motedis one.
thingiverse
free
Kitchen Carcass Shelf Support Pin by bobblejot
...b
bobblejot twitter
just one of the small pins that you normally use 4 off to support a shelf in most standard kitchen carcasses.
thingiverse
free
Simple Bowden Clips by bobblejot
...es in very handy. anyway i printed these in taulmans 230 nylon and they came out very well strong, tough and flexible.
enjoy :-)
thingiverse
free
Modular Filament Rack by bobblejot
... these with petg i get 0.1 shrinkage and so i wanted a neat fit. it would be best to check your tubing diameter before printing.
thingiverse
free
M18 Proximity Sensor Brackets by bobblejot
... proximity sensors.
with 3 different depth spacers 10mm, 15mm and 20mm.
materials:
m18 inductive proximity sensor - aliexpress
thingiverse
free
Gilbert by bobblejot
...still trying to get my printer working for another project so if somebody does hopefully you can let me know how he turned out :)
thingiverse
free
20mm Cable Chain Ends by bobblejot
...but it looks similar to the bulk of chains available on amazon and ebay.
they hopefully may come in handy for somebody.
enjoy :-)
thingiverse
free
Duet3d Smart Effector Part Fan Shroud by bobblejot
... duet smart effector, have plenty of 40mm 24vdc fans laying around so decided to knock up something that would hopefully work ok.