Pinecone decor lamp by Nazrim

Last crawled date: 3 years ago

This is a ceiling lamp which consists of 53 different parts which are organized as plug-in system.
The assembled lamp has a total height of ~37cm and a maximum diameter of ~60cm. The total weight (printed with gold PLA and the settings described below) is just below 1kg.
Top-down the angle of each segment level increases as follows: 10°, 20°, 40°, 55°, 70°
All plugs have 0.2mm tolerance for a better fitting. This is the perfect amount for my printer, but take care since the parts with 55° and 70° overhangs can get a bit fragile.
All parts of the inner structure are 2mm thick while the outer segments are 1mm thick.
Variations
Its overall shape is somewhat similar to a pinecone. An additional decor increases the amount of emitted light and creates intresting shadow patterns. To match your personal flavor (and your printers capabilities), I added three different versions of each segment:
Full solid
Overhangpart solid (on the photos)
Full decor
Print Instructions
In total you have to print 53 parts for the lamp. Each inner ring (InnerRing*.stl) needs to be printed once, all other files 8 times.
Since I am a little bit lazy, you have to rotate the parts to lay flat on your printbed
Additional Information
I couldn't provide pictures of the lamp in function since I have no matching bulb at the moment.
Please see Print Settings for some hints which helped me printing the lamp.
Assembly instructions can be found in Post-Printing section
In case you want to support my work, feel free to visit my Patreon.