Thingiverse
PINDA for HyperCube + Marlin config
by Thingiverse
Last crawled date: 4 years, 3 months ago
PINDA or other 8mm sensor is much smaller and lighter than 12mm sensors, but they are just as useful. P.I.N.D.A. is an DC 5V NPN NC inductive proximity sensor.
If you do not use the built-in temperature sensor, you will need to wait a few minutes between each print to cool.
The latest version of Marlin finally includes P.I.N.D.A. probe temperature compensation: https://github.com/MarlinFirmware/Marlin/releases/tag/2.0.2
Temperature calibration: https://marlinfw.org/docs/gcode/G076.html
Marlin config:
#define TEMP_SENSOR_PROBE 1
#define TEMP_PROBE_PIN 15 //TEMP_1_PIN
#define FIX_MOUNTED_PROBE
#define NOZZLE_TO_PROBE_OFFSET { 28, 12, -0.5 }
#define MIN_PROBE_EDGE 30
#define Z_CLEARANCE_DEPLOY_PROBE 0
#define Z_CLEARANCE_BETWEEN_PROBES 1
#define Z_CLEARANCE_MULTI_PROBE 1
#define AUTO_BED_LEVELING_BILINEAR
Wiring:
blue: GND,
brown: +5V
black: signal
white: thermistor
GND, +5V, Signal -> Z min endstop
PINDA thermistor -> second HotEnd thermistor
Result:
https://marlinfw.org/docs/gcode/M871.html
Probe temp: 30.00 C; Offset: 0.00 um
Probe temp: 35.00 C; Offset: 65.00 um
Probe temp: 40.00 C; Offset: 157.00 um
Probe temp: 45.00 C; Offset: 292.00 um
Probe temp: 50.00 C; Offset: 415.00 um
Probe temp: 55.00 C; Offset: 610.00 um
Probe temp: 60.00 C; Offset: 754.00 um
Probe temp: 65.00 C; Offset: 735.00 um
Probe temp: 70.00 C; Offset: 869.00 um
Probe temp: 75.00 C; Offset: 1004.00 um
Probe temp: 80.00 C; Offset: 1138.00 um
Bed temp: 60.00 C; Offset: 0.00 um
Bed temp: 65.00 C; Offset: 25.00 um
Bed temp: 70.00 C; Offset: 35.00 um
Bed temp: 75.00 C; Offset: 37.00 um
Bed temp: 80.00 C; Offset: 37.00 um
Bed temp: 85.00 C; Offset: 46.00 um
Bed temp: 90.00 C; Offset: 56.00 um
Bed temp: 95.00 C; Offset: 66.00 um
Bed temp: 100.00 C; Offset: 75.00 um
Bed temp: 105.00 C; Offset: 85.00 um
Bed temp: 110.00 C; Offset: 94.00 um
Hungarian blog post:https://zen3d.hu/p-i-n-d-a-marlin-konfiguracio/
Mosquito hotend adapter:https://www.thingiverse.com/thing:4032460
If you do not use the built-in temperature sensor, you will need to wait a few minutes between each print to cool.
The latest version of Marlin finally includes P.I.N.D.A. probe temperature compensation: https://github.com/MarlinFirmware/Marlin/releases/tag/2.0.2
Temperature calibration: https://marlinfw.org/docs/gcode/G076.html
Marlin config:
#define TEMP_SENSOR_PROBE 1
#define TEMP_PROBE_PIN 15 //TEMP_1_PIN
#define FIX_MOUNTED_PROBE
#define NOZZLE_TO_PROBE_OFFSET { 28, 12, -0.5 }
#define MIN_PROBE_EDGE 30
#define Z_CLEARANCE_DEPLOY_PROBE 0
#define Z_CLEARANCE_BETWEEN_PROBES 1
#define Z_CLEARANCE_MULTI_PROBE 1
#define AUTO_BED_LEVELING_BILINEAR
Wiring:
blue: GND,
brown: +5V
black: signal
white: thermistor
GND, +5V, Signal -> Z min endstop
PINDA thermistor -> second HotEnd thermistor
Result:
https://marlinfw.org/docs/gcode/M871.html
Probe temp: 30.00 C; Offset: 0.00 um
Probe temp: 35.00 C; Offset: 65.00 um
Probe temp: 40.00 C; Offset: 157.00 um
Probe temp: 45.00 C; Offset: 292.00 um
Probe temp: 50.00 C; Offset: 415.00 um
Probe temp: 55.00 C; Offset: 610.00 um
Probe temp: 60.00 C; Offset: 754.00 um
Probe temp: 65.00 C; Offset: 735.00 um
Probe temp: 70.00 C; Offset: 869.00 um
Probe temp: 75.00 C; Offset: 1004.00 um
Probe temp: 80.00 C; Offset: 1138.00 um
Bed temp: 60.00 C; Offset: 0.00 um
Bed temp: 65.00 C; Offset: 25.00 um
Bed temp: 70.00 C; Offset: 35.00 um
Bed temp: 75.00 C; Offset: 37.00 um
Bed temp: 80.00 C; Offset: 37.00 um
Bed temp: 85.00 C; Offset: 46.00 um
Bed temp: 90.00 C; Offset: 56.00 um
Bed temp: 95.00 C; Offset: 66.00 um
Bed temp: 100.00 C; Offset: 75.00 um
Bed temp: 105.00 C; Offset: 85.00 um
Bed temp: 110.00 C; Offset: 94.00 um
Hungarian blog post:https://zen3d.hu/p-i-n-d-a-marlin-konfiguracio/
Mosquito hotend adapter:https://www.thingiverse.com/thing:4032460
Similar models
grabcad
free
High temperature Thermistor sensor probe
... temperature thermistor sensor probe
grabcad
high temperature thermistor sensor probe, length 6". with coolent water inlet.
thingiverse
free
E3d Hemera P.I.N.D.A. Probe Mount by yolego20
...e3d hemera p.i.n.d.a. probe mount by yolego20
thingiverse
p.i.n.d.a. probe mount for the hemera
probe offsets {-33.65, -8.2}
thingiverse
free
Anet A6 BLTouch/3DTouch mount (front) by thvranken
...isplay or with command m851) and saved to the eeprom (using the display or with command m500), in my case, this was around -2 mm.
thingiverse
free
Ender 3 linear mod by SK848667
...inda probe black cable -> board z-stop signal pin (in board image as pc2)
pinda probe blue cable -> board z-stop ground pin
thingiverse
free
Creality CR-10 Mini IR Sensor Mount by jneilliii
...round pin and out to the other z end stop pin. enable fix_mounted_probe in marlin and then determine and set the z probe offsets.
thingiverse
free
Anycubic Kossel Plus Inductive auto level probe mount by sschueller
...: https://www.youtube.com/watch?v=yjsjfitpeds
my full marlin config: https://git.techdroid.com/sschueller/marlin/tree/deltakossel
thingiverse
free
Sensor Mount for Anet A8 by mulger
...0 // y offset: -front +behind [the nozzle]
//#define z_probe_offset_from_extruder 0 // z offset: -below +above [the nozzle]
grabcad
free
NTC THERMISTOR
...ntc thermistor
grabcad
ntc thermistor , temperature probe
thingiverse
free
TRONYX sensor 08N for Fusebox Printer
... 30 // x offset: -left +right [of the nozzle]
define y_probe_offset_from_extruder -50 // y offset: -front +behind [the nozzle]
thingiverse
free
Ender 5 PINDA Probe Mount
...!
p.s. you can put some plain old kitchen aluminum foil below the magnetic sticker to get the probe to trigger against the bed ;)
Pinda
thingiverse
free
Sapphire Pinda braket by antonykim
...sapphire pinda braket by antonykim
thingiverse
sapphire pinda sensor braket
mr.goodman
미스터굿맨
thingiverse
free
Protective PINDA to Original Prusa i3 MK2 by zz2012
...protective pinda to original prusa i3 mk2 by zz2012
thingiverse
small design pinda protection.
thingiverse
free
MK2 Pinda setup template by audiobull
... have not tested this on any printers so please use with caution. i will upload an updated version with the correct size shortly.
thingiverse
free
Prusa PINDA 8-12 adapteur by menyiv
...for prusa extruders used on mk3 printer family.
after print:
probe needs to by fitted in adjusting plastic part inner diameter.
thingiverse
free
Pinda mount for Prusa I3 Mk2.5 by teesider61
...s the pinda probe and screws into the existing captive nut and places the pinda probe in almost the same location on the carriage
thingiverse
free
PINDA Off Set Mount by cooasty
... height (business cards).
remove pinda, install bracket, install pinda & set height.
turn on and run first layer calibration.
thingiverse
free
PINDA v2 Probe Adapter by archangel1982
...ingle. shorter is for printing 2 and putting one in top and one in bottom. should fit pinda v2 size very well. hope it helps !
thingiverse
free
Prusa MK3S Pinda and Fan Mount with braces to counteract Pinda Sag by d2user
...on. so far they work great, the "after" photo is with approx. 24hrs warm printing. based on r5 components from prusa.
thingiverse
free
Prusa Mk2 Pinda Lock Sleeve by ewgqreh4h4h
...m (file is 13.8, intent was to sand to perfect length). i have included a step file so you can make it whatever height you want.
thingiverse
free
Prusa MK Nozzle to Pinda height
... run first layer calibration and adjust z to suit, remember the higher the number the lower it goes, i have no problems this way.
Config
3d_export
free
explicit content carpet
...product!<br>you can change the texture to <br> in node config<br>- 3,000 particles<br>- 200 descendants<br>|| <br> ||<br>- .blend (all in...
3dfindit
free
Config
...config
3dfind.it
catalog: wilo
thingiverse
free
coupling scad config by wanick
...coupling scad config by wanick
thingiverse
scad file config sizes
thingiverse
free
Klipper Configs for Creality Printers by artheoday
...klipper configs for creality printers by artheoday
thingiverse
klipper config... i will upload more in the future
thingiverse
free
FLSun kossel marlin config by RobertHarrison
...flsun kossel marlin config by robertharrison
thingiverse
configuration.h
thingiverse
free
FormD T1 Config theory by wispymatt
...validate your own dimensions.
credit to formdworks.com for the actual case design and thanks to w360mod for permission to share.
thingiverse
free
TRONXY X5S-400 MKS SBase Config by BG32940
...tronxy x5s-400 mks sbase config by bg32940
thingiverse
my current config for my tronxy x5s-400 mks sbase
thingiverse
free
Martian II parts for my config by t0mpi
...martian ii parts for my config by t0mpi
thingiverse
todo
thingiverse
free
DuetWIFI Config and Case For 300 X 300 by lanman1969
...my config for the duet wifi, and a simple case i made
the following files are included
config.g
homeall.g
homex.g
homey.g
homez.g
thingiverse
free
Artillery Genius Klipper config by Mudz
...btt skr 1.4 with tmc2209
tft screen don't work with klipper
**the led is not enabled but you can add the code to the firmware
Hypercube
turbosquid
free
HyperCube
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Hypercube 3D Model
...hypercube 3d model
3dexport
cube hypercube four-dimensional space side geometry edge
hypercube 3d model dmitry87 54991 3dexport
3d_export
$5
tesseract hypercube
...t it. moreover different textures and materials can be added and tesseract can be set in any scene. dimensions: x: 4m y: 4m z: 4m
thingiverse
free
Hypercube
...hypercube
thingiverse
hypercube projected into three dimensional space.
thingiverse
free
Hypercube by alpheccar
...hypercube by alpheccar
thingiverse
projection of an hypercube on an hypersphere.
thingiverse
free
Hypercube by BorisBlavasky
...hypercube by borisblavasky
thingiverse
hypercube. testing the tool.
thingiverse
free
Hypercube by Christian42
...hypercube by christian42
thingiverse
i made a hypercube using rhino3d
thingiverse
free
Hypercube by Christian42
...hypercube by christian42
thingiverse
i made a hypercube using rhino3d
thingiverse
free
HyperCube by wwebber
...hypercube by wwebber
thingiverse
this is the standard perspective projection of the hypercube from 4d to 3d
thingiverse
free
HyperCube scaled by Muzeem
...hypercube scaled by muzeem
thingiverse
customized hypercube
Marlin
3d_export
$35
Marlin
...s : zbrush 3ds max ztool obj fbx dae 3ds stl properties : 8*14*6 production time : 15 hours 52 gram models are drawn with zbrush.
3ddd
$1
Faro Marlin pendant
...mpara colgante blancohttp://www.faro.es/es/productos/marlin-lampara-colgante-blanco/
polyrate: 14107
в архиве fbx+obj
3ddd
$1
Faro Marlin bra
...
marlin black wall lamphttp://www.faro.es/en/productos/marlin-lampara-aplique-negro/
polyrate: 15491
в архиве fbx+obj
turbosquid
$19
Blue marlin
...e 3d model blue marlin for download as max, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1341037)
3d_export
$60
Marlin Blue 3D Model
...marlin blue 3d model
3dexport
fish sea 3ds marlin mental ray textured animals
marlin blue 3d model ojoalperro 57644 3dexport
3ddd
free
Brass Marlin
... винтаж , марлин
статуэтка марлина из латуни. винтаж.
3d_export
$60
martin p5m marlin
...d states navy performing naval patrols. it also served with the united states coast guard and the french navy. 285 were produced.
humster3d
$15
AMC Marlin 1965 Blueprint
...65 blueprint 3d model in the format you need. all our 3d models was created on real car base and maximally close to the original.
humster3d
$75
3D model of AMC Marlin 1965
...y a detailed 3d model of amc marlin 1965 in various file formats. all our 3d models were created maximally close to the original.
turbosquid
$20
Cartoon fish - Xiphias gladius - marlin
...phias gladius - marlin for download as max, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1673408)