Thingiverse
![PiKVM R4C3R PCIe bracket mount for RPi Zero W by R4C3R](/previews/9687939.jpg)
PiKVM R4C3R PCIe bracket mount for RPi Zero W by R4C3R
by Thingiverse
Last crawled date: 2 years, 12 months ago
This is a PCIe bracket on which a PiKVM setup can be fixed based on a Raspberry Pi Zero W + Lusya HC100 Ver:A01 HDMI to CSI bridge + 3cmx7cm pcb with ATX power on/off + reset.
Check out the awesome PiKVM project at https://pikvm.org/
There are several different versions of the Lusya board, I used the Blackupgrade version: 45x30mm (the same width as PI ZERO, the same two holes), which can be found here:
https://de.aliexpress.com/item/4000102166176.html?spm=a2g0s.9042311.0.0.27424c4deJpKzB
The bracket can be mounted to the mounting plate with 3mm x 6mm or 8mm countersunk head screws.
The RPi Zero and Lusya HDMi-CSI bridge can be mounted with 2.5mm x 6mm cylinder head screws. The PCB can be mounted with 2mm x 6mm cylinder head screws.
I take the 5V power from the 5V Stanndby power of the ATX powersupply. Check how much power you power supply can supply before tapping into it. Many power supplies nowadays support 5V @ 3A which is more than enough to power the RPi Zero + electronics.
I used this adapter to tap into the 5V Standby Power from the ATX power supply. Just cut the appropriate cable and insert the terminal block in between.
https://de.aliexpress.com/item/10000367688781.html?spm=a2g0s.9042311.0.0.27424c4dDT1NAo
When connecting the USB to the micro USB to the internal USB make sure NOT to connect the 5V power from the from the USB cable in order to avoid backpowering the RPi zero. But this is also in the PiKVM instructions on the PiKVM website.
I used a standard 3cmx7cm standard prototype pcb, which can be found here https://www.aliexpress.com/item/4000817854796.html?spm=a2g0o.productlist.0.0.3a087129ZeLLTy&algo_pvid=1a7b8f10-9118-4432-b04f-de4ced2a20ad&algo_expid=1a7b8f10-9118-4432-b04f-de4ced2a20ad-1&btsid=2100bde316218808073943389ecbc8&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
I used the VO617A optocouplers to create the connection to the ATX power & reset buttons as well as the LED power & hdd signal.
This is a work in progress
Check out the awesome PiKVM project at https://pikvm.org/
There are several different versions of the Lusya board, I used the Blackupgrade version: 45x30mm (the same width as PI ZERO, the same two holes), which can be found here:
https://de.aliexpress.com/item/4000102166176.html?spm=a2g0s.9042311.0.0.27424c4deJpKzB
The bracket can be mounted to the mounting plate with 3mm x 6mm or 8mm countersunk head screws.
The RPi Zero and Lusya HDMi-CSI bridge can be mounted with 2.5mm x 6mm cylinder head screws. The PCB can be mounted with 2mm x 6mm cylinder head screws.
I take the 5V power from the 5V Stanndby power of the ATX powersupply. Check how much power you power supply can supply before tapping into it. Many power supplies nowadays support 5V @ 3A which is more than enough to power the RPi Zero + electronics.
I used this adapter to tap into the 5V Standby Power from the ATX power supply. Just cut the appropriate cable and insert the terminal block in between.
https://de.aliexpress.com/item/10000367688781.html?spm=a2g0s.9042311.0.0.27424c4dDT1NAo
When connecting the USB to the micro USB to the internal USB make sure NOT to connect the 5V power from the from the USB cable in order to avoid backpowering the RPi zero. But this is also in the PiKVM instructions on the PiKVM website.
I used a standard 3cmx7cm standard prototype pcb, which can be found here https://www.aliexpress.com/item/4000817854796.html?spm=a2g0o.productlist.0.0.3a087129ZeLLTy&algo_pvid=1a7b8f10-9118-4432-b04f-de4ced2a20ad&algo_expid=1a7b8f10-9118-4432-b04f-de4ced2a20ad-1&btsid=2100bde316218808073943389ecbc8&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
I used the VO617A optocouplers to create the connection to the ATX power & reset buttons as well as the LED power & hdd signal.
This is a work in progress
Similar models
thingiverse
free
![PiKVM R4C3R Low Profile PCIe bracket mount for RPi Zero W by R4C3R](/t/9687948.jpg)
PiKVM R4C3R Low Profile PCIe bracket mount for RPi Zero W by R4C3R
... create the connection to the atx power & reset buttons as well as the led power & hdd signal.
this is a work in progress
thingiverse
free
![DPS5005 Lab Bench Power Supply with Bluetooth](/t/4656233.jpg)
DPS5005 Lab Bench Power Supply with Bluetooth
...press.com/item/32904656744.html?spm=a2g0s.9042311.0.0.27424c4deuxv7q
please feel free to write comments and suggest improvements.
thingiverse
free
![XT60 to USB power converter by Tiitan](/t/8235239.jpg)
XT60 to USB power converter by Tiitan
...ews inside
mounted to my printer with m216 t-nut bolt
i use it to power my printer octopi directly from my printer power supply.
thingiverse
free
![alfawise anet and so on support usb camera power supply by netgearnono](/t/5030246.jpg)
alfawise anet and so on support usb camera power supply by netgearnono
...port usb camera power supply
link module usb https://fr.aliexpress.com/item/32815214750.html?spm=a2g0s.9042311.0.0.27426c37hsmsyz
grabcad
free
![Lichuan 80st-M02430 Servomotor 750W](/t/8488498.jpg)
Lichuan 80st-M02430 Servomotor 750W
...ess.com/item/4000185976627.html?spm=a2g0s.9042311.0.0.27eb4c4dscekcs
bought this servos for my new project.
not tested them jet.
thingiverse
free
![ATX power supply breakout box](/t/4912440.jpg)
ATX power supply breakout box
...com/geekcreit-xh-m229-desktop-computer-chassis-power-supply-module-atx-transfer-board-power-output-terminal-module-p-1418198.html
thingiverse
free
![Akkubank case v1 by hdsoftaustria](/t/8248839.jpg)
Akkubank case v1 by hdsoftaustria
...charger-board-charging-circuit-board-step-up-boost-power-supply-module-dual/32712072271.html?spm=a2g0s.9042311.0.0.aea04c4dwwgycs
thingiverse
free
![DPS5005 power supply case by geht_nicht_gibts_nicht](/t/8303201.jpg)
DPS5005 power supply case by geht_nicht_gibts_nicht
...100-265v-to-36v-5a-adapter-switching-power-supply/32826892512.html?spm=a2g0s.9042311.0.0.27424c4dozmxpb
.par => solid edge st8
thingiverse
free
![Ikea Skadis accessories for electronic](/t/4794456.jpg)
Ikea Skadis accessories for electronic
...311.0.0.54896c37yaagbf
power supply 5v 150w:https://fr.aliexpress.com/item/32914130716.html?spm=a2g0s.9042311.0.0.54896c37yaagbf
thingiverse
free
![Rasperry Pi zero Nas Kumiko by Sploutch](/t/8234893.jpg)
Rasperry Pi zero Nas Kumiko by Sploutch
... fan https://fr.aliexpress.com/item/4001123850095.html?spm=a2g0s.9042311.0.0.27426c37uubevt
software :
raspbian with webmin tool
Pikvm
thingiverse
free
![pikvm zero by badsmoke](/t/8242540.jpg)
pikvm zero by badsmoke
...smoke
thingiverse
a housing for the pikvm as pizero
as a suitable csi-hdmi module i have used this
print settings:
0.2 layerhigh
thingiverse
free
![PiKVM case (LCD+ATX) by hamele0n](/t/9692367.jpg)
PiKVM case (LCD+ATX) by hamele0n
...x board is included.
lcd screen: https://a.aliexpress.com/_9rsr8z
long screws: m2.5*30
https://easyeda.com/al.pankov/zerow-kvm-v2
thingiverse
free
![PIKVM Geekworm Remix by wtopace](/t/8040229.jpg)
PIKVM Geekworm Remix by wtopace
...m style hdmi to csi-2 module (https://www.amazon.com/gp/product/b0899l6zxz/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=utf8&psc=1).
thingiverse
free
![Simple PiKVM Case by rstcologne](/t/8028336.jpg)
Simple PiKVM Case by rstcologne
...ions are required.
case is modeled around this pi-model:https://grabcad.com/library/raspberry-pi-4-model-b-1
thanks for sharing.
thingiverse
free
![PiKVM R4C3R Low Profile PCIe bracket mount for RPi Zero W by R4C3R](/t/9687948.jpg)
PiKVM R4C3R Low Profile PCIe bracket mount for RPi Zero W by R4C3R
... create the connection to the atx power & reset buttons as well as the led power & hdd signal.
this is a work in progress
thingiverse
free
![USB-C/PWR Splitter case by Manulin](/t/8358031.jpg)
USB-C/PWR Splitter case by Manulin
...use this adaptor to build a pi-kvm (hardware v2 https://github.com/pikvmpikvm#diy-getting-started). a m3x12mm screw is...
thingiverse
free
![Pi-KVM Case by Langelus](/t/8496235.jpg)
Pi-KVM Case by Langelus
...thingiverse simple case for raspberry pi 4 running pi-kvm (https://github.com/pikvmpikvm) parts used: raspberry pi 4 usb-c/pwr splitter from tindie...
thingiverse
free
![PiKVM Mount for Fan and HDMI-to-CSI2 by chuckcage](/t/8238615.jpg)
PiKVM Mount for Fan and HDMI-to-CSI2 by chuckcage
...igured out how to use it yet, but if you want to try, you can always tack on a lead to it, too.) have fun, and enjoy the silence.
thingiverse
free
![Conix's PI-KVM case by conix67](/t/8103517.jpg)
Conix's PI-KVM case by conix67
...- check out pi-kvm github site for details - https://github.com/pikvmpikvm the case includes opening to expose pins for atx...
R4C3R
thingiverse
free
![Single relay mount 24x43mm by R4C3R](/t/8740170.jpg)
Single relay mount 24x43mm by R4C3R
...raspberry pi. that way it is possible to use it in combination with the din rail mount: http://www.thingiverse.com/thing:1076997
thingiverse
free
![LM2596 step down 21x43mm mount by R4C3R](/t/8739618.jpg)
LM2596 step down 21x43mm mount by R4C3R
... raspberry pi. that way it is possible to use it in combination with the din rail mount: http://www.thingiverse.com/thing:1076997
thingiverse
free
![LM2577 DC step-up with LED display 35x66mm by R4C3R](/t/8740135.jpg)
LM2577 DC step-up with LED display 35x66mm by R4C3R
... the pcb with m3x4 screws. the outer screw mounts have been moved to the corners to leave the screw connectors easily accessible.
thingiverse
free
![20 x 20 T-nut profile by R4C3R](/t/8640314.jpg)
20 x 20 T-nut profile by R4C3R
...int it. it has an excellent fit. you can also use the skp model to alter its size or design add-ons. please share your add-ons :)
thingiverse
free
![LM 2597 with LED display + single relay mount by R4C3R](/t/8740137.jpg)
LM 2597 with LED display + single relay mount by R4C3R
... the pcb with m3x4 screws. the outer screw mounts have been moved to the corners to leave the screw connectors easily accessible.
thingiverse
free
![Wire loom tool - Kabelfresser Werkzeug by R4C3R](/t/8302005.jpg)
Wire loom tool - Kabelfresser Werkzeug by R4C3R
...mm diameter, so it needs to be scaled down. i used netfabb basic to do this, but most slicers offer some sort of scaling as well.
thingiverse
free
![Arduino Uno R3 mount by R4C3R](/t/8314395.jpg)
Arduino Uno R3 mount by R4C3R
... your specific mounting requirements.
i've used 2,2mm x 6,5mm metal screws to fix the arduino uno r3 type board to the mount.
thingiverse
free
![BIFRC spot welder snap fit case by R4C3R](/t/8041528.jpg)
BIFRC spot welder snap fit case by R4C3R
...sparant hotglue (if you don't use to much ;) )
the pcb doesn't rattle inside the case and is kept tighly in its position.
thingiverse
free
![BIFRC spot welder snap fit case by R4C3R](/t/8035655.jpg)
BIFRC spot welder snap fit case by R4C3R
...arant hotglue (if you don't use to much ;) )
the pcb doesn't rattle inside the case as it is kept tighly in its position.
thingiverse
free
![BIFRC spot welder snap fit case by R4C3R](/t/8035665.jpg)
BIFRC spot welder snap fit case by R4C3R
...rant hot glue (if you don't use to much ;) )
the pcb doesn't rattle inside the case as it is kept tighly in its position.
Pcie
thingiverse
free
![Riser PCIe](/t/4890178.jpg)
Riser PCIe
...riser pcie
thingiverse
riser pcie lock
thingiverse
free
![PCIe Card Stand by Studious_Gluteus](/t/8675648.jpg)
PCIe Card Stand by Studious_Gluteus
...pcie card stand by studious_gluteus
thingiverse
a stand / display for unused pcie cards.
thingiverse
free
![PCIe 16x SSD holder by _alram](/t/8359729.jpg)
PCIe 16x SSD holder by _alram
...pcie 16x ssd holder by _alram
thingiverse
pcie 16x ssd holder.
thingiverse
free
![PCIE SSD mount by halloween_town](/t/8733694.jpg)
PCIE SSD mount by halloween_town
...en_town
thingiverse
mirrored version of pcie mount here:http://www.thingiverse.com/thing:946543
will post pictures once printed.
thingiverse
free
![Intel Vive WiGig PCIe bracked UpsideDown for PCIe Extender by AngelKing86](/t/8124232.jpg)
Intel Vive WiGig PCIe bracked UpsideDown for PCIe Extender by AngelKing86
...sily rotated built in.
extender: https://www.amazon.de/gp/product/b07n38y799/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=utf8&psc=1
thingiverse
free
![Button Hub and PCIe RiserCover by sir_AGG](/t/8793061.jpg)
Button Hub and PCIe RiserCover by sir_AGG
...nd pcie risercover by sir_agg
thingiverse
a little box for a 22mm and a 16mm button.
the longer part is cover for a pcie priser
thingiverse
free
![Full height PCIE Bracket for S7120 by crystalmeow](/t/9673999.jpg)
Full height PCIE Bracket for S7120 by crystalmeow
...full height pcie bracket for s7120 by crystalmeow
thingiverse
full height pcie bracket for s7120
thingiverse
free
![PCIe Tester by GotKrypto76](/t/8283965.jpg)
PCIe Tester by GotKrypto76
...hem available.
connections are pretty snug, you may want to file them down a little bit. probably gets better after a bit of use.
thingiverse
free
![PCIe Horizontal Riser Lock by xludodx](/t/8353674.jpg)
PCIe Horizontal Riser Lock by xludodx
...i-e) 1x gpu riser cards (usb) to prevent them being dislodged from the slot.
this clip is foreseen for horizontal usb pcie riser.
thingiverse
free
![Mini PCIE Adapter by sooyewguan](/t/8935459.jpg)
Mini PCIE Adapter by sooyewguan
...se
screw-less half size to full size mini pci express (pcie) adapter.
updated
version 2: can be printed without any supports
Rpi
3d_export
$5
![Rasberry PI 3D Model](/t/38928.jpg)
Rasberry PI 3D Model
...rasberry pi 3d model 3dexport rpi model electronics case gadget 3dprinting printing rasberry pi 3d...
thingiverse
free
![rpi case by ekinghao](/t/8249522.jpg)
rpi case by ekinghao
...rpi case by ekinghao
thingiverse
rpi case
thingiverse
free
![Rpi Case by sgehman](/t/8012747.jpg)
Rpi Case by sgehman
...rpi case by sgehman
thingiverse
rpi case
thingiverse
free
![RPI / RPI-WW Cam Holder by TobyTetzi123](/t/8867033.jpg)
RPI / RPI-WW Cam Holder by TobyTetzi123
...spberry-pi-rpi-wwcam/p/30037327
regards toby
edit:
4th. picture shows rpi-ww cam
5th. picture shows rpi cam
at the same position.
thingiverse
free
![rpi by Jylehr](/t/8798131.jpg)
rpi by Jylehr
...rpi by jylehr
thingiverse
a rack
thingiverse
free
![RPi Camera 5MP v1.3](/t/4925052.jpg)
RPi Camera 5MP v1.3
...rpi camera 5mp v1.3
thingiverse
rpi camera 5mp v1.3
thingiverse
free
![RPi Tower Stand by shri3k](/t/8147353.jpg)
RPi Tower Stand by shri3k
...rpi tower stand by shri3k
thingiverse
a minimal tower mount for rpi.
tested with rpi4
thingiverse
free
![RPi Fan Cam by Edd77](/t/8250221.jpg)
RPi Fan Cam by Edd77
...rpi fan cam by edd77
thingiverse
rpi fan camhttps://www.thingiverse.com/thing:2835318
thingiverse
free
![RPi screen back by audiofreak9](/t/8897294.jpg)
RPi screen back by audiofreak9
...rpi screen back by audiofreak9
thingiverse
from mcm electronics, this is a back for the rpi screen
thingiverse
free
![KIS-RPI 234 (mount for rack) by legalized](/t/8344624.jpg)
KIS-RPI 234 (mount for rack) by legalized
...its for rpi 2, rpi 3, rpi 4
drill holes for fittings or modify the thing so it works for you.. this can also be used as a stand..
Zero
3ddd
$1
![ZERO, BEAM](/t/739276.jpg)
ZERO, BEAM
...zero, beam
3ddd
zero
поворотная люстра zero , beam
design_connected
$9
![Zero-in](/t/4568223.jpg)
Zero-in
...zero-in
designconnected
established & sons zero-in tables computer generated 3d model. designed by jay osgerby .
3ddd
free
![Sub-Zero](/t/624566.jpg)
Sub-Zero
...sub-zero
3ddd
sub-zero , голова
sub-zero corona render!
3ddd
$1
![Metalspot / Zero](/t/918357.jpg)
Metalspot / Zero
...metalspot / zero
3ddd
metalspot
metalspot zero
3ddd
$1
![Catalano Zero](/t/609307.jpg)
Catalano Zero
...catalano zero
3ddd
catalano , унитаз
catalano zero
3ddd
$1
![SUB ZERO](/t/605958.jpg)
SUB ZERO
... sub zero
the first and only 3d model of sub zero refrigerator.
the model is very accurate.
turbosquid
free
![Zero](/t/13311039.jpg)
Zero
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![Zero](/t/13306410.jpg)
Zero
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![Zero](/t/13233438.jpg)
Zero
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
![ZERO / Hide](/t/736547.jpg)
ZERO / Hide
...zero / hide
3ddd
zero
polys: 25486
wire-spline
Bracket
archibase_planet
free
![Bracket](/t/945862.jpg)
Bracket
...bracket
archibase planet
bracket corbel holder
bracket 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bracket](/t/945864.jpg)
Bracket
...bracket
archibase planet
bracket corbel console
bracket 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bracket](/t/945865.jpg)
Bracket
...bracket
archibase planet
corbel holder bracket
bracket 6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bracket](/t/945866.jpg)
Bracket
...bracket
archibase planet
bracket corbel console
bracket 8 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bracket](/t/945867.jpg)
Bracket
...bracket
archibase planet
bracket corbel holder
bracket n280911 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bracket](/t/946539.jpg)
Bracket
...bracket
archibase planet
holder corbel bracket
bracket 9 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bracket](/t/946540.jpg)
Bracket
...bracket
archibase planet
corbel holder bracket
bracket 10 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bracket](/t/946541.jpg)
Bracket
...bracket
archibase planet
corbel console bracket
bracket 11 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bracket](/t/946542.jpg)
Bracket
...bracket
archibase planet
holder console bracket
bracket 12 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bracket](/t/946544.jpg)
Bracket
...bracket
archibase planet
bracket corbel holder
bracket 13 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
W
3ddd
$1
![chair W](/t/955484.jpg)
chair W
...chair w
3ddd
chair w
3ddd
$1
![кресло w](/t/912359.jpg)
кресло w
...кресло w
3ddd
капитоне
кресло w
3ddd
$1
![KUTEK (W) W-ZW-5](/t/993046.jpg)
KUTEK (W) W-ZW-5
...kutek (w) w-zw-5
3ddd
kutek
3d модель люстри (w) w-zw-5 фабрики kutek. в архиве: max2012, obj, fbx, mat.(два варианта металла)
3ddd
$1
![KUTEK (W) W-ZW-3](/t/991261.jpg)
KUTEK (W) W-ZW-3
...kutek (w) w-zw-3
3ddd
kutek
3d модель люстри (w) w-zw-3 фабрики kutek. в архиве: max2012, obj, fbx, mat. (два варианта металла)
3ddd
$1
![KUTEK (W) W-ZW-1](/t/865594.jpg)
KUTEK (W) W-ZW-1
...kutek (w) w-zw-1
3ddd
kutek
3d модель люстри (w) w-zw-1 фабрики kutek. в архиве: max2012, obj, fbx, mat (два варианта металла).
3ddd
free
![aneken W&W](/t/814749.jpg)
aneken W&W
...aneken w&w
3ddd
2 женских манекена, ценники и фолио. материалы и текстуры прилагаются.
design_connected
$9
![KTribe W](/t/4567637.jpg)
KTribe W
...ktribe w
designconnected
ktribe w computer generated 3d model. designed by starck, philippe.
design_connected
$16
![Troy W](/t/4571278.jpg)
Troy W
...troy w
designconnected
magis troy w computer generated 3d model. designed by wanders, marcel.
turbosquid
$9
![Menu - Benjamin Hubert - W W Carafe](/t/13375189.jpg)
Menu - Benjamin Hubert - W W Carafe
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
![Menu - Benjamin Hubert - W W Carafe](/t/13375190.jpg)
Menu - Benjamin Hubert - W W Carafe
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Mount
3d_export
free
![mounting bracket](/t/11930644.jpg)
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
![MOUNTING](/t/13297806.jpg)
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![Mounts](/t/13301538.jpg)
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![Mount Fuji](/t/13283919.jpg)
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
![Headphone mount LR](/t/13049709.jpg)
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
![Mount rainier](/t/13389641.jpg)
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
![pipe mounting](/t/13242068.jpg)
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
![Mounting Tires](/t/13457386.jpg)
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
![Magnetic GoPro Mount](/t/11385909.jpg)
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
![Stone Mount](/t/13279026.jpg)
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)