Thingiverse
Picatinny Battery Box by ABCDOMG
by Thingiverse
Last crawled date: 3 years ago
Battery Box rail mountable to Picatinny.
Designed for 100x34x15mm Minitamiya batteries with a little wiggle room for one slightly bigger,
Internal measurements 111.5x38.5x18.1, squish at your own risk.
The hole at the top fits a Mini Tamiya connector through just fine, I suggest running the wire through the hole before putting the battery in the box.
Requires a short m3 nut and bolt to close compartment, 10mm suggested.
Requires an m3 nut and bolt to secure to rail, I recommend 30mm but 25mm "may" fit though I haven't tested it.
I would suggest minor supports and printing with one of the short sides on the build plate, depends how good your printer is at bridging.
Designed for 100x34x15mm Minitamiya batteries with a little wiggle room for one slightly bigger,
Internal measurements 111.5x38.5x18.1, squish at your own risk.
The hole at the top fits a Mini Tamiya connector through just fine, I suggest running the wire through the hole before putting the battery in the box.
Requires a short m3 nut and bolt to close compartment, 10mm suggested.
Requires an m3 nut and bolt to secure to rail, I recommend 30mm but 25mm "may" fit though I haven't tested it.
I would suggest minor supports and printing with one of the short sides on the build plate, depends how good your printer is at bridging.
Similar models
thingiverse
free
short picatinny rail riser by Planetler
...rail riser by planetler
thingiverse
just a simple rail riser :) perfect length for short/small red dot ;)
use m3 bolts and nuts.
thingiverse
free
27mm Picatinny Flashlight Mount by HDawsome
...ck nuts for all three.
this design correctly conforms to standard picatinny rails and is intended to a functionally strong piece.
thingiverse
free
Runcam 2 Picatinny Rail Mpount by nzb2004
...y mount, you will have to get the bolt and nut yourself, i suggest going to a local hardware store and seeinbg what fits in this.
thingiverse
free
hex foregrip picatinny remix
... is 30mm shank length (not including the head) i designed this to be used with a button head bolt but a hex cap can also be used.
thingiverse
free
battery box for picatinny rail by Planetler
...copters-helikopter-flugzeuge-modellboote/dp/b017grb54y/ref=sr_1_15?ie=utf8&qid=1505152189&sr=8-15&keywords=tattu+lipo
thingiverse
free
Picatinny rail 90° by pelice
...ingiverse
small rail for attach extras at 90°. picatinny and weaver compatible.
need only an m3 bolt and nut.
for airsoft use.
thingiverse
free
15mm Rail System Single Clamp by bipedal
...mm rail system single clamp by bipedal
thingiverse
hole sized for a 1/4" bolt.
requires one m4 nut and bolt for clamping.
thingiverse
free
30mm Picatinny Flashlight Mount by DynagonRobotics
...in 2 parts and requires 2x m5 bolts for mounting to rail, 2x short m3 screws to tighten clamp and 1x long m3 screw for the hinge.
grabcad
free
Airgun Bottle Clamp
...nny rail clamp for airgun bottle. should fit bottles around 60mm. needs m3 bolts around 48mm long and some m3 captive nut things.
thingiverse
free
Very Big Boxes for ToolOrganaizer by X1Coder
...onal box at the moment (one section).
a m3 bolts, shims and nuts are required.
two m2 bolts and nuts for boxes hand are required.
Abcdomg
thingiverse
free
Meshify C Riser by ABCDOMG
...ow for the bottom of the case, the feet of the meshify c sit nicely into the smaller top side.
this will lift your pc up by 30cm.
thingiverse
free
Interkosmos logo by ABCDOMG
...h is set to be 0.4mm thick so if you require thicker for your colours to show properly just scale the z height to fit your needs.
thingiverse
free
Roscosmos Logo by ABCDOMG
... the features are at a different height in equal proportions so you can make them as thick as your filament needs to show nicely.
thingiverse
free
Ares Amoeba Replacement Parts by ABCDOMG
....com/thing:2621217
everything else is either stock or purchased parts.
edit: submitted a bunch of extra front handguard versions
thingiverse
free
5/8" Thread Vesa Microphone Stand by ABCDOMG
...ads sideways didn't go well.
it is quite tall and thin so i printed it with a brim but if your printer needs it is up to you.
Picatinny
turbosquid
$3
Picatinny Rail
...uid
royalty free 3d model picatinny rail for download as max on turbosquid: 3d models for games, architecture, videos. (1327045)
turbosquid
free
Picatinny rail
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
hand griper picatinny
...lty free 3d model hand griper picatinny for download as blend on turbosquid: 3d models for games, architecture, videos. (1493626)
turbosquid
$10
Nerf Picatinny Rail
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
MIL-STD Picatinny rail pattern.prt
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
MIL-STD Picatinny rail pattern.U3D
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
MIL-STD Picatinny rail pattern.SLDPRT
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Free 3D MIL-STD Picatinny Rail
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
equipment free m4a1
...a m4a1 with editable materials and equipment free with picatinny rails for your own equipment...
thingiverse
free
Picatinny to picatinny mount
...atinny mount
thingiverse
this mount allow you to joint picatinny to picatinny rails for night vision system or whatever you want
Battery
3d_ocean
$2
Battery
...battery
3docean
battery electronic
a high quality battery .
3d_export
free
battery
...battery
3dexport
battery
3d_ocean
$5
Battery
...battery
3docean
battery electronics
a classic 6 v battery, high poly with materials
3d_ocean
$3
Batteries
...batteries 3docean aa aaa batteries battery d electronics energy materials power subdivision uv unwrapped aa,...
3d_export
$19
Lead-acid battery storage battery lithium battery
...ttery storage battery lithium battery
3dexport
1.lead-acid battery storage battery lithium battery 2.files include 3dmax obj fbx
3d_ocean
$7
Battery Model
...battery model
3docean
big battery car battery vehicle battery
car battery, big battery, vehicle battery.
3ddd
free
battery energier
...battery energier
3ddd
battery energier , батарейка
battery energier
turbosquid
free
battery
...battery
turbosquid
free 3d model battery for download as obj on turbosquid: 3d models for games, architecture, videos. (1151676)
3d_ocean
$1
Battery Model
...lack minus plus white yellow
this is battery model is about 1000 triangles. turntable preview is smoothed version of the battery.
3d_export
$10
battery 18650
...battery 18650
3dexport
battery 18650
Box
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box 2 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
carton cardboard box box
box 1 - 3d model (*.3ds) for interior 3d visualization.
3d_export
$6
box
...box
3dexport
box
3d_export
$5
Box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
archibase_planet
free
Box
...box
archibase planet
box box for paper notebook pencil
box - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n170111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n050411 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Boxes
...boxes
archibase planet
boxes box case bin
boxes n281213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.