Phonon Case - 5.6L APU Case by Makaba

Last crawled date: 3 years, 4 months ago

I wanted to focus on a few essential things: ease of printing, modular panels design, unibody appearance, no visible screws, high dissipation capacity (due to my experience with the 3400g).
The case is designed for APU users, it's 5.6 liters of volume, it supports Flex ATX power supply above the PCIE slot and it's printed in green glass-like PETG.
The cpu cooler could have a maximum height of 125mm, and the case is compatible, at least with the Asrock Fatal1ty B450, with the TEC Phononic HEX 2.0, having an "inverted" airflow (intake on behind, exahust on front) that maybe contributes on cool down also the vrms.
Case info:
Dimensions: 189.5 X 200X 148.6 mm.
No case fan.
No drive support (tough could be possible to add 2.5" drive support if you really need)
For assembling the case you need:
4 M3 brass threaded inserts for the "top.stl" https://amzn.to/36iflnR
4 M3 threaded rods, each size should be ~144mm.https://amzn.to/3n9dFnz
4 M3 Capped nuts to permanently fix to the threaded rods with super glue or threadlocker, which they will act as feet and panel joints lock. https://amzn.to/3n5tvzn
4 Male M3 spacers (5/6mm height) to screw directly to the "base.stl" https://amzn.to/3p3xnTv or 4 long screws + 4 M3 5/6mm long spacers + 4 nuts. https://amzn.to/3p7GjXT
3 Thumbscrews (6-32 Thread) for fixing the PSU. https://amzn.to/3ln17IN
4 Motherboard screws. https://amzn.to/3n58yo6
1 16mm power switch.