Thingiverse
Perfboard/Protoboard mounts by ValarmLLC
by Thingiverse
Last crawled date: 3 years, 1 month ago
A few simple mounting brackets for protoboard/perfboard, whatever you like to call it. Like most of our stuff, these have screw slots at 0.5mm multiples in order to facilitate easy mounting on Bud Industries plastic back panels. We mostly use these for creating custom DC voltage regulators with multiple output screw terminals on a bus. A double-length version (pictured) lets you really put a ton of connectors on there - don't separate the boards, the double-length version has a support beam across the middle, but no screw holes there.
Maybe you could even use it to make a DIY Arduino Micro/Mini/etc breakout board (though there are plenty of these available for peanuts and that work very nicely).
The screw standoffs are sized to fit rather tiny #2 x 1/4" sheetmetal screws. But hot glue works nicely too. :-)
Update 2018-09-05: added files for 80x60mm and 70x30mm protoboards to the 40x60 that were originally uploaded.
Maybe you could even use it to make a DIY Arduino Micro/Mini/etc breakout board (though there are plenty of these available for peanuts and that work very nicely).
The screw standoffs are sized to fit rather tiny #2 x 1/4" sheetmetal screws. But hot glue works nicely too. :-)
Update 2018-09-05: added files for 80x60mm and 70x30mm protoboards to the 40x60 that were originally uploaded.
Similar models
thingiverse
free
Parametric Perfboard by Chunkmunk01
...tandard .1 inch spacing, and centered on board. certain sizes may cut out portions of the screw holes if screw holes are enabled.
thingiverse
free
Smars M5Stack adapter by k120189
... in place of an arduino board and uses two m3 screws to attach to the m5stack. screw length will depend on what modules are used.
thingiverse
free
Protoboard 3 Hole Shaft Holder by AutomationExploration
... trick. i am working on a better solution, so totally open for suggestions!
let me know if you have any questions or suggestions!
thingiverse
free
FRDM-KL25Z Protoboard Holder V1 by argandas
... frdm-kl25z, this was made to have botch the board and the protoboard together and fixed, it fits perfectly with standard screws.
thingiverse
free
Protoboard Baseplate by AutomationExploration
... trick. i am working on a better solution, so totally open for suggestions!
let me know if you have any questions or suggestions!
thingiverse
free
Raspberry Pi 4 B and Protoboard Mount
...erse
holds a raspberry pi with screws and a midsize prototyping board.
it is one of my frist printouts and my first publication.
thingiverse
free
Customizable Arduino Protoboard by pogosoft
...protoboard by pogosoft
thingiverse
arduino customizable prototype board
multiple configuration available
design with fusion 360
thingiverse
free
Mounting box for Duet2 Wifi by Baird1fa
..." screws (regular pan head work fine, or if you have socket head cap screws those will also work.
hope you like it.
thanks.
thingiverse
free
Dual 50mm cooling fans mount for any MKS board by PeteVino
...com/thing:1092129
ideally, use wood screws to mount to ply-board. screws - 3 for ply-board & 4x for fans (not all slots used)
thingiverse
free
Protection dashboard mount for RS-CNC
...rse
screen protection for rs-cnc (or others...)
to be used with 5mm acrylic board (100mm and the length you want) and 4mm screws
Valarmllc
thingiverse
free
LM2596 Voltage Regulator Mounting Bracket by ValarmLLC
... on 1/2cm interval to easily screw down to perforated backing boards by bud industries and other makers of protective enclosures.
thingiverse
free
12V Digital Thermostat Mounting Bracket by ValarmLLC
...res, the slots are spaced on 1/2cm intervals to line up with the pre-perforated enclosure backers from bud industries and others.
thingiverse
free
Sabertooth dual 32A motor controller mounting bracket by ValarmLLC
... conductor of heat, which is why stainless cookware always needs a nice thick layer of aluminum sandwiched in between the steel).
thingiverse
free
MakerGear M2 Bed Cooling Fan Clip by ValarmLLC
...ns. this clip is sized to snugly grip the heated, glass-topped bed on our makergear m2, not sure whether it will work on yours...
thingiverse
free
Yoctopuce Sensor Module Mount, Long/Narrow by ValarmLLC
...ally place support columns manually under the hooks, but it's not absolutely necessary in good pla with a well-setup printer.
thingiverse
free
Wire Terminal/Connector Block/Strip by ValarmLLC
... photos). we use a ton of these things while building various remote monitoring systems for our customers - learn more at valarm.
thingiverse
free
Arduino Mega 2560/Due mounting bracket, proto-shield compatible by ValarmLLC
...closure backplate (pictured). screws to attach arduino to the bracket are #2 x 1/4" sheetmetal screws, or metric equivalent.
thingiverse
free
Threaded Plugs for 5/8" and 7/8" Holes by ValarmLLC
...pdated to have coarser threads that are much easier to print.
edit2: new v10 (stl file) that has a looser nut, mates much easier.
thingiverse
free
Eva-Dry 333 Desiccant Clip by ValarmLLC
...while supporting the substrate from behind. the 3m adhesive is "pressure activated" so to speak.
enjoy a dry container!
Perfboard
thingiverse
free
perfboard reference by bettercallitart
...perfboard reference by bettercallitart
thingiverse
reference for 16 * 10 cm perfboard
thingiverse
free
Enclosure for perfboard by ManWithoutOptions
...;keywords=perfboard&psc=1)
everything should be in the right orientation to print. none of them need support except the mask.
thingiverse
free
Perfboard wire bending tool by RobotShed
... spanning short perfboard (0.1") holes.
tinker away: https://www.tinkercad.com/things/igvavmcyviq-perfboard-wire-bender/edit
thingiverse
free
Parametric Perfboard by Chunkmunk01
...tandard .1 inch spacing, and centered on board. certain sizes may cut out portions of the screw holes if screw holes are enabled.
thingiverse
free
Perfboard by kitahiro921
...with holes at standard pitch, 2.54 mm (0.1 in) spacing. the board is divided into 9, you can snap it off into your desired size.
thingiverse
free
UP! Plus / Afinia Sliding Perfboard Mod by mb20music
...perfboard mod by mb20music
thingiverse
this makes attaching the perfboard faster and easier on the up! plus and afinia printers.
thingiverse
free
Electronics Project Box with Perfboard
...breaking off the tabs. if you are careful you can also reopen the box using a very thin blade to slightly pry the tabs out again.
thingiverse
free
Atmel AVR Programmer Case for Perfboard USBasp by DomesticHacks
...y perfboard usbasp avr programmer.
i prited it in pla with a 0.35mm nozzle, 0.30mm layer height and a honeycomb infill of 0,15.
thingiverse
free
Box for ESP8266 on perfboard. by HermanKopinga
...giverse
simple box with a nifty back cover so you can hang it easily and still remove the box. room for outgoing wires included.
thingiverse
free
Perfboard Build Surface by TeamTeamUSA
...es out of the holes, but to remove the bits that remain, led leads work great (we all have the odd led laying about, yes?)!"
Protoboard
thingiverse
free
protoboard holder
...protoboard holder
thingiverse
soporte para placa mini-protoboard
thingiverse
free
Protoboard by mianrelie
...anrelie
thingiverse
solderless breadboard for 'protoboard 830' (model mb-102) x 3
banana jack - mounting hole: 3/8"
thingiverse
free
protoboard box by blmak
...oard to the university labs safety.
the size of the protoboard is 11cm x 16,5cm and it fits tight, so be careful with tolerances.
thingiverse
free
protoboard 170 holder by julioms
...protoboard 170 holder by julioms
thingiverse
this is a protoboard 170 p holder.
thingiverse
free
Adafruit PERMA ProtoBoard full size
...fruit perma protoboard full size
thingiverse
protoboard based on the adafruit perma protoboard full size for project developing.
thingiverse
free
LCD 16x2 support for protoboard by cmgomez
...lcd 16x2 support for protoboard by cmgomez
thingiverse
lcd 16x2 support for protoboard
thingiverse
free
Rail Arduino support for protoboard. by cmgomez
...rail arduino support for protoboard. by cmgomez
thingiverse
rail arduino support for protoboard.
thingiverse
free
FX Box Protoboard
...anufacturable with most online pcb houses by just uploading the gerber files from the gerber.zip file or the github release page.
thingiverse
free
FRDM-KL25Z Protoboard Holder V1 by argandas
... frdm-kl25z, this was made to have botch the board and the protoboard together and fixed, it fits perfectly with standard screws.
thingiverse
free
Arduino Uno and Protoboard Base by Konredus
...rd base by konredus
thingiverse
this is a base so you can have your arduino uno and the protoboard always together ready to use!
Mounts
3d_export
free
mounting bracket
...the part of a hinge, handle or latch that mounts the hardware to a cabinet. mounting plates make it...
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)