Thingiverse
PCB Etching with 3D Printer Agitatior by chrismolloy
by Thingiverse
Last crawled date: 3 years, 1 month ago
I made Tech2C's Pen holder https://www.thingiverse.com/thing:2459624
I used it on my Milling machine to apply sharpie ink as an etch resist.
Here is a video https://youtu.be/vKqAf8pkKJ0
Then I used my 3D printer to heat and agitate the Ferric Chloride solution with the pcb in it.
GCODE
g1 y0 f4000
g1 y50
g1 y0 f200
g1 y50
make many copies of this. Takes about 15 seconds to execute.
You can see the sample pcb traces that I produced using this technique. I would increase the overlap of the sharpie lines and print twice to ensure a good resist. the thin lines were just one layer of sharpie. they worked but got a little undercut.
Here is a video https://youtu.be/UFc9t4WyRU4
I found that setting my bed temp to 100C kept the Ferric Chloride solution below the recommended 55C maximum with my plastic tray which is pretty thick.
If anyone has a great way to get pcb gerbers into Fusion 360, please message me or comment on this thing
I used it on my Milling machine to apply sharpie ink as an etch resist.
Here is a video https://youtu.be/vKqAf8pkKJ0
Then I used my 3D printer to heat and agitate the Ferric Chloride solution with the pcb in it.
GCODE
g1 y0 f4000
g1 y50
g1 y0 f200
g1 y50
make many copies of this. Takes about 15 seconds to execute.
You can see the sample pcb traces that I produced using this technique. I would increase the overlap of the sharpie lines and print twice to ensure a good resist. the thin lines were just one layer of sharpie. they worked but got a little undercut.
Here is a video https://youtu.be/UFc9t4WyRU4
I found that setting my bed temp to 100C kept the Ferric Chloride solution below the recommended 55C maximum with my plastic tray which is pretty thick.
If anyone has a great way to get pcb gerbers into Fusion 360, please message me or comment on this thing
Similar models
thingiverse
free
PCB Holder for 3D printer bed by plapointe6
...ccess, but etching pcb with chemicals was a fail.
used in pair with my sharpie holder : https://www.thingiverse.com/thing:4598914
thingiverse
free
Bubbler for etching tank by aroldorosenberg
... it should work even better with a good filament and a well tuned printer, one that can fully print the 5.5mm air hose connector.
thingiverse
free
PCB engraving by Skulbl4k4
...com/thing:1178187
bad english. i am swiss
i used inventor 2016
if you are any question, comment.
if you need tuto, i can do it !
thingiverse
free
Sharpie holder for 3D printer by plapointe6
... the cover.stl part and the sharpie_top.stl part.
used in pair with my pcb bed holder : https://www.thingiverse.com/thing:4598910
thingiverse
free
Mechanical Endstop v1.0b Through-hole remix by merlinjim
...unicorn pen to etch-resist a pcb
use a laser or laserunicorn ( http://www.thingiverse.com/thing:6846 ) to etch a resist off a pcb
thingiverse
free
Dremel Holder
... my video, i designed this bracket for my 3d printer to be able to mount a dremel to it which was then used to create pcb etches.
thingiverse
free
PCB Milling Machine by mediamilan
...tps://www.youtube.com/watch?v=fvvjuva_jis
https://www.youtube.com/watch?v=x6-dlpdx3hq
https://www.youtube.com/watch?v=nmztaahrn0i
thingiverse
free
Etching pcb tank by oja
...ates foam and uses small amount of chloride.
i printed it from abs. tank was broken, i had to repair it with acetone + abs = mud.
thingiverse
free
FAILED RepRap PCB Routing by TrevM
...hingiverse
i did end up with a working pcb, but it took too long and was only just useable, i have gone back to ferric chloride.
thingiverse
free
PROXXON Micromot 50 Holder by gergap
...ths.
have a look on my blog http://gergap.de/gcode-simulator.html for more information on etching pcbs using eagle and pcb-gcode.
Chrismolloy
thingiverse
free
drain hair catcher by chrismolloy
...drain hair catcher by chrismolloy
thingiverse
drain hair cathcer for your tub
thingiverse
free
revised top for kerfmaker by chrismolloy
... kerfmaker by chrismolloy
thingiverse
a shorter version of the top part to allow making larger dadoes with a regular kerf blade.
thingiverse
free
T-Nut for OpenBuilds beam by chrismolloy
...-nut for openbuilds beam by chrismolloy
thingiverse
this is a t-nut with a 3mm nut imbedded in it for use with openbuilds rails.
thingiverse
free
Manfrotto bottom cover for openpantilt by chrismolloy
...to bottom cover for openpantilt by chrismolloy
thingiverse
this is a modified bottom cover that has a manfrotto p200 style foot.
thingiverse
free
Lawnboy Mower Gas Cap by chrismolloy
...by chrismolloy
thingiverse
this is a replacement gas cap for an older lawnboy mower.
updated files to improved version may 2019
thingiverse
free
Stanley box without support by chrismolloy
...without support by chrismolloy
thingiverse
i am putting this up to show the author how his thing can be printed without support.
thingiverse
free
Inhaler reminder by chrismolloy
...an remember if you have taken your inhaler.
i have included a fusion 360 & step design file you can modify for your own needs
thingiverse
free
Caliper Stand by chrismolloy
...screw it to my bench. i added a clip to stop the calliper from falling out of the stand, after having the original do just that!
thingiverse
free
Ramps back panel by chrismolloy
...the rear panel.
connectors are:
2,3,4,9 pin aviation connectors - ebay
gt60 power connectors male/female
usb panel mount connetor
thingiverse
free
cable chain link remixed by chrismolloy
...g:1127158
just added some easily removable supports to stop the part curling up when printing with abs or other warping plastics.
Etching
design_connected
$18
Etch Web
...etch web
designconnected
tom dixon etch web computer generated 3d model. designed by dixon, tom.
design_connected
$18
Etch Shade
...etch shade
designconnected
tom dixon etch shade computer generated 3d model. designed by dixon, tom.
turbosquid
$9
Etch Web
...b
turbosquid
royalty free 3d model etch web for download as on turbosquid: 3d models for games, architecture, videos. (1197495)
3ddd
$1
Etch Shade Assembled
... etch shade
люстра etch shade assembled
тип лампы: 1 х е27 х 60w
материал: cталь
цвет: cеребро, золото
размер: ø 32см, ø 47см
3ddd
$1
Etch Web D65
...mt.gd.a00
цвет: медь, нержавеющая сталь
материал: нержавеющая сталь
диаметр: 65 см
дизайнер: tom dixon
год создания дизайна: 2012
3ddd
$1
Tom Dixon / etch
...tom dixon / etch
3ddd
tom dixon
артикул: md20310-1ch-320
размер: d32x150
3ddd
$1
BAROQUE RAVENNA ETCHED LEANER MIRROR
...ror
3ddd
19th c.baroque ravenna , напольное
19th c. baroque ravenna etched leaner mirror
3ddd
$1
Зеркало RH/ROCOCO FLORAL ETCHED MIRROR
...зеркало rh/rococo floral etched mirror
3ddd
restoration hardware
зеркало rococo floral etched mirror от restoration hardware
turbosquid
$20
Etched Glass Lamp by Roberto Rida
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$11
JONATHAN ADLER Owl & TOM DIXON Etch
...ixon etch
designconnected
tom dixon jonathan adler owl & tom dixon etch computer generated 3d model. designed by dixon, tom.
Pcb
turbosquid
$19
PCB assembly line.
...mbly line. for download as 3ds, max, ige, obj, stl, and sldas on turbosquid: 3d models for games, architecture, videos. (1330649)
3ddd
$1
GRAMERCY HOME - CARMELA ARMCHAIR 602.023-PCB
...gramercy home - carmela armchair 602.023-pcb
3ddd
gramercy home
gramercy home
carmela armchair
602.023-pcb
www.gramercy-home.ru
3d_export
$150
auto pcb board loder inspection machine
...auto pcb board loder inspection machine
3dexport
auto pcb board loder & inspection machine --> only step file
3d_export
$7
turning mechanism drawing pcb board turnover machine
...turning mechanism drawing pcb board turnover machine
3dexport
turning mechanism drawing pcb board turnover machine
turbosquid
$9
Stereo Jack 3.5mm for soldering to a PCB
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
LED Right Angled PCB Mounting
...m led. step and igus files. multiple led colors: blue, purple, red, green, and yellow. dimensions case w 4,5mm , h 7,3mm l 6,4mm.
3d_export
$20
automatic pcb loading and unloading dispensing test automatic line
...ment structure is very complex. it is a very practical equipment for smt industry. the equipment is mature application equipment.
3d_export
$18
an automatic line for fct function test of pcb
... drawings are downloaded, you can directly watch and edit the contents. welcome to download and learn from your favorite friends.
3d_export
$5
USB Micro B connector
...step and igus for 3d import into ecad tools, pcb footprints. added also a altium designer pcb component library...
3d_export
$15
plastic housing with dewalt battery holder
...case measures 155x106x60. inside the case there are two pcb of 130x98 and 98x42...
Printer
archibase_planet
free
Printer
...inter
archibase planet
printer laser printer pc equipment
printer n120614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Printer
...rchibase planet
laser printer office equipment computer equipment
printer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$100
Printer
...er
turbosquid
royalty free 3d model printer for download as on turbosquid: 3d models for games, architecture, videos. (1487819)
turbosquid
$3
Printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1670230)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595546)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595105)
turbosquid
$10
Printer
...id
royalty free 3d model printer for download as max and 3dm on turbosquid: 3d models for games, architecture, videos. (1607146)
turbosquid
$7
Printer
...royalty free 3d model printer for download as ma, ma, and obj on turbosquid: 3d models for games, architecture, videos. (1644580)
turbosquid
$30
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.