Thingiverse
PCB Drill by Geminy_Studio
by Thingiverse
Last crawled date: 3 years, 1 month ago
Hi guys
First of all I want to apologize for my English, so if I made some terrible mistakes or something does`t make sense please let me know:)
This is the PCB mini drill. It`s my first design so if you come across some problems feel free to contact me or leave a comment. Also I am sharing my SolidWorks 2014 files so if you want you can make changes to model of your own. The motor holder part is designed to be removable, so it can be redesigned to hold another type of the motor.
The following hardware will be needed to assemble the drill:
M8 (13mm) nut
M8 x 130mm threaded rod (1x)
8 x 150mm rod (2x)
6 x 70mm rod (1x)
6 x 100mm rod (1x)
Spring (1x)
Motor (39mm in height, 29mm in diameter) , or some other but the motor holder part must be changed to fit different motor ( You can find these motors in some old printers )
and search for this on ebay :
8Pcs 0.5-3mm Small Electric Drill Bit Collet Micro Twist Chuck Tool Kit CC
Assembly instructions :
Print all necessary parts ( I suggest using 30% honeycomb infill , supports only if the are needed and 10mm brim at least for the body part)
Get ready the metal parts and the motor
You fill need to finish the body part with 8mm (8.1 or 8.2) drill, to fit the 8 mm rods tight but free to move.
Stick the 8 mm rods to the stand, insert height_wheel into back of the stand and insert the treated rod trough middle hole on the stand a try to screw it into the height_wheel ( no need to glue it )
Fit the 8mm nut to the body part, close and glue it with nut_cup (with acetone).
Insert motor to the motor holder and then try to put on the drill head,
Connect motor holder to the slider part. This is designed to be tight fit so before you try you should use sandpaper on both parts and finish the surface a little.
Put the body on the stand , put on string and insert slider with motor.
Put the top_end part on.
Now you must insert gear to the 6x70 metal rod. This is kind of tricky. Drill the hole on the gear with 6mm (6.1 or 6.2) drill to make tight fit with the rod. First insert the rod trough one hole on the back of the body part, then slide on the gear and then try to push the rod into the opposite hole on the body. ( You can chose on witch side you want to have handle. Left or right.)
Complete the handle by inserting handle_clutch on the longer end of 70mm rod, insert the 100mm rod into the clutch and put on the handle_end part.
12 Now you have to fix somehow the gear to the 70 mm rod. This is up to you ( until I remake this part to be more easy to assemble) . I drilled 2.5 mm hole trough the gear and the rod and glued in a piece of 2.5 mm welding wire. Otherwise the gear may be sliding when the force is applied to the handle.
The drill should be complete now, Last thing you must do is solder some wires to the motor,connect to 12V (1,5A) power source, and try to drill some holes :)
10.4.2017 Motor holder for motor 47mm x 28mm STL was added
First of all I want to apologize for my English, so if I made some terrible mistakes or something does`t make sense please let me know:)
This is the PCB mini drill. It`s my first design so if you come across some problems feel free to contact me or leave a comment. Also I am sharing my SolidWorks 2014 files so if you want you can make changes to model of your own. The motor holder part is designed to be removable, so it can be redesigned to hold another type of the motor.
The following hardware will be needed to assemble the drill:
M8 (13mm) nut
M8 x 130mm threaded rod (1x)
8 x 150mm rod (2x)
6 x 70mm rod (1x)
6 x 100mm rod (1x)
Spring (1x)
Motor (39mm in height, 29mm in diameter) , or some other but the motor holder part must be changed to fit different motor ( You can find these motors in some old printers )
and search for this on ebay :
8Pcs 0.5-3mm Small Electric Drill Bit Collet Micro Twist Chuck Tool Kit CC
Assembly instructions :
Print all necessary parts ( I suggest using 30% honeycomb infill , supports only if the are needed and 10mm brim at least for the body part)
Get ready the metal parts and the motor
You fill need to finish the body part with 8mm (8.1 or 8.2) drill, to fit the 8 mm rods tight but free to move.
Stick the 8 mm rods to the stand, insert height_wheel into back of the stand and insert the treated rod trough middle hole on the stand a try to screw it into the height_wheel ( no need to glue it )
Fit the 8mm nut to the body part, close and glue it with nut_cup (with acetone).
Insert motor to the motor holder and then try to put on the drill head,
Connect motor holder to the slider part. This is designed to be tight fit so before you try you should use sandpaper on both parts and finish the surface a little.
Put the body on the stand , put on string and insert slider with motor.
Put the top_end part on.
Now you must insert gear to the 6x70 metal rod. This is kind of tricky. Drill the hole on the gear with 6mm (6.1 or 6.2) drill to make tight fit with the rod. First insert the rod trough one hole on the back of the body part, then slide on the gear and then try to push the rod into the opposite hole on the body. ( You can chose on witch side you want to have handle. Left or right.)
Complete the handle by inserting handle_clutch on the longer end of 70mm rod, insert the 100mm rod into the clutch and put on the handle_end part.
12 Now you have to fix somehow the gear to the 70 mm rod. This is up to you ( until I remake this part to be more easy to assemble) . I drilled 2.5 mm hole trough the gear and the rod and glued in a piece of 2.5 mm welding wire. Otherwise the gear may be sliding when the force is applied to the handle.
The drill should be complete now, Last thing you must do is solder some wires to the motor,connect to 12V (1,5A) power source, and try to drill some holes :)
10.4.2017 Motor holder for motor 47mm x 28mm STL was added
Similar models
thingiverse
free
DIY Mini Drill Press by akajes
...ted
5x m8 washers can be printed
4x m3 x 10
2x m3 x 20
8x m3 washers
6x m3 nuts
motor with drill bit holder
wires, psu and switch
thingiverse
free
Night Stand - Cable Manager Insert by koensmelt
...table. (other hole sized can be used when part is scaled down/up.
place the insert in the table. put the cables trough the hole.
thingiverse
free
Original Prusa MK3/3s LCD Stand by mrd_xy
...y
thingiverse
i have put holes in holder body.
i reduced the thicknes of the holder insert by 0.1 mm to make sure it fits nicely
thingiverse
free
Watch Winder Geared by JohoJoho
...infos will make this watch winder work for you, since i think the design is really neat.
feel free to ask if anything is unclear.
thingiverse
free
8mm rod holders by juanfy
...e between rods and between a single rod and profile center.
-now you can tighten the screws.
-put some grease in the rods
enjoy!
thingiverse
free
piano bench feet by bripulliam
...ench can fit into. add some hot glue to the bottom as you put the legs in to keep them on tight. or drill a hole and add a screw.
thingiverse
free
Poker and remote control for camera holder by gut2000
...oles for the montage are just good to fit but is it a bit difficult you can go trough the holes with a 8mm drill. a perfect fitt.
thingiverse
free
CTC, FlashForge Y Linear Rod Holder by boucaron
....2mm layer height, 0.4mm nozzle, 4 insets, 8 top/bottom layers and 30% strong hex infill, pla at 220c, slow speed and no cooling.
thingiverse
free
Solenoid motor by Geminy_Studio
...d luck ! :)
i welcome any suggestions how to make this model better so feel free to email me ,send pm or leave a comment. thanks!
thingiverse
free
Universal SmartPhone Clamp for Tripod by Scorpion722
...for the tripod screw is empty (use a 5 mm drill bit if needed)
screw the clamp to the tripod
insert your phone and you are done !
Geminy
turbosquid
$49
Gemini
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
GEMINI
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Gemini
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Gemini 3D Model
...gemini 3d model
3dexport
gemini
gemini 3d model kc14 64869 3dexport
3d_ocean
$6
Zodiac Gemini Cartoon
...zodiac gemini cartoon
3docean
gemini horoscop horoskop lowpoly zodiac zodijak
lowpoly model zodiac gemini cartoon
turbosquid
$14
Ring Gemini
...osquid
royalty free 3d model ring gemini for download as stl on turbosquid: 3d models for games, architecture, videos. (1274055)
turbosquid
$30
Gemini Armchair
...ee 3d model gemini armchair for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1505354)
turbosquid
$49
gemini-spacecraft
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
Ring Gemini
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$12
Gemini chair
...es which can be placed as single seating elements, in pairs or in groups of various sizes and configurations. the concept for ...
Pcb
turbosquid
$19
PCB assembly line.
...mbly line. for download as 3ds, max, ige, obj, stl, and sldas on turbosquid: 3d models for games, architecture, videos. (1330649)
3ddd
$1
GRAMERCY HOME - CARMELA ARMCHAIR 602.023-PCB
...gramercy home - carmela armchair 602.023-pcb
3ddd
gramercy home
gramercy home
carmela armchair
602.023-pcb
www.gramercy-home.ru
3d_export
$150
auto pcb board loder inspection machine
...auto pcb board loder inspection machine
3dexport
auto pcb board loder & inspection machine --> only step file
3d_export
$7
turning mechanism drawing pcb board turnover machine
...turning mechanism drawing pcb board turnover machine
3dexport
turning mechanism drawing pcb board turnover machine
turbosquid
$9
Stereo Jack 3.5mm for soldering to a PCB
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
LED Right Angled PCB Mounting
...m led. step and igus files. multiple led colors: blue, purple, red, green, and yellow. dimensions case w 4,5mm , h 7,3mm l 6,4mm.
3d_export
$20
automatic pcb loading and unloading dispensing test automatic line
...ment structure is very complex. it is a very practical equipment for smt industry. the equipment is mature application equipment.
3d_export
$18
an automatic line for fct function test of pcb
... drawings are downloaded, you can directly watch and edit the contents. welcome to download and learn from your favorite friends.
3d_export
$5
USB Micro B connector
...step and igus for 3d import into ecad tools, pcb footprints. added also a altium designer pcb component library...
3d_export
$15
plastic housing with dewalt battery holder
...case measures 155x106x60. inside the case there are two pcb of 130x98 and 98x42...
Drill
archibase_planet
free
Drill
...drill
archibase planet
drill electric drill power drill
drill n091107 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Drill
...drill
archibase planet
drill hand drill
drill 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Drill
...drill
archibase planet
drill hand drill
drill 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Drill
...drill
archibase planet
drill hand drill
drill 3- 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Drill
...drill
archibase planet
boring rig rig drill
drill n070807 - 3d model for interior 3d visualization.
archibase_planet
free
Drill
...drill
archibase planet
hand drill toolware
drill 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Drill
...drill
archibase planet
perforator drill auger
drill 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$25
Drill
...ll
turbosquid
royalty free 3d model drill for download as ma on turbosquid: 3d models for games, architecture, videos. (1203923)
turbosquid
free
Drill
...l
turbosquid
free 3d model drill for download as fbx and obj on turbosquid: 3d models for games, architecture, videos. (1628646)
archibase_planet
free
Drill
...drill
archibase planet
boring mill perforator driller
drill pro 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Studio
3d_ocean
$10
Studio
...studio
3docean
studio
studio 3dsmax2011 vray render scanline render
design_connected
$13
Studio
...studio
designconnected
muuto studio computer generated 3d model.
design_connected
$18
Studio
...studio
designconnected
offecct studio computer generated 3d model. designed by unstudio.
3d_ocean
$5
PureLight Studio
...lightning orange professional pure pure lightning pure lights realistic red studio studio box
realistic studio. purelight studio.
turbosquid
$75
Studio
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Studio
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$65
studio
...studio
3dexport
simple rendering of the scene file
3d_export
$10
modern studio
...modern studio
3dexport
modern studio vr4.1
3d_export
$5
element studio
...element studio
3dexport
element studio kare design
3d_export
$5
light studio
...light studio
3dexport
modeling of light studio... v-ray render.