Patio Umbrella Caddy by jlee1026

Last crawled date: 3 years ago

This patio umbrella caddy will allow to keep your towels off the ground and off the lawn chairs. Can be used as a towel hook only and will accommodate 8 towels. Can be use as a drink or cup holder and will accommodate 8 drinks. The can / bottle adapter will allow you to hold drinks that are too small or are not shape like a dixie / solo cup. For larger printers, print only the UmbrellaCaddyLg_1~2 and just slide the two pieces together around the center pole of the umbrella. For smaller printer, print UmbrellaCaddySm_1 ~ 4. then attach sm_1 to sm_2 and sm_3 to sm_4 to form two full sized halves. Then assemble the two halves around the center pole. Print as many can/bottle adapter as you need. Should print these using HT PLA or ABS, but would still recommend removing the caddy during off season for longevity.
While the caddy is installed, you will need to lift the caddy to clear the umbrella crank during opening and closing of the umbrella