Parametric Tardis with LED hole by nopoe

Last crawled date: 3 years ago

If you just want a Tardis, check out the thing I derived this from. If you want a Tardis with a hole in the top for an LED and plenty of room for batteries and electronics, this is it!
This is like 98% Gossamer's work, but I needed to modify it a little to get a 5mm LED to fit nicely in the top. I also changed the hollowed-out section in the middle to a square instead of a circle. This leaves plenty of room for a battery to power the LED. Instead of a dome at the top of the hollowed section, I used a 4 sided pyramid subroutine taken from randyy's OpenSCAD Parts Library. http://www.thingiverse.com/thing:6021
The only new feature that isn't parametric in this design is the diameter of the recessed hole meant to catch the LED's flange if it has one. This is permanently set to one, but feel free to change it or remove that line of code altogether if you don't want it.
UPDATE (8/23/12):
I finally got the overhang right. It's parametric now, too. Go ahead and check out the instructions if you're interested.