Parachute mount for DJI Inspire 1 by 33dev

Last crawled date: 3 years ago

CHRISTMAS present from 33 DEVICES to all Thingiverse.com guys - first real working free and easy to print parachute mount for DJI Inspire 1!
To compile full parachute system you will need:
1) print Mount x1, it is placed under the battery pack
2) print Pushout x1, it's the part which pushes the parachute
3) print Petlya x1, it's the part on the end of rubber stripe which holds the parachute.
also you will need:
1) 2 bolts M2.5x8, to replace the two ones under the battery pack of your Inspire 1
2) 2 bolts M3x10, to mount pushout part to main part
3) servomotor 6-9g and needle, for the release mechanism
4) springs 5-7cm length x2, for the pushout force
5) rubber stripe 10cm length, to hold the parachute
6) parachute 50"-75"
Video with 33DEVICES parachute mounts in work.
Compile as shown on photos. If you will have any questions, feel free to write to [email protected]
/ /
www.33dev.ru