PanelDue 7i Case for the Railcore II by Mholiv

Last crawled date: 4 years, 2 months ago

This is my simple PanelDue 7i case for the Railcore II.
The screen will be 0.5 mm recessed from the front but other then that everything should be flush with everything.
The used M3x18 screws but any 3mmx18mm screws and hex bolts should work.
The hex pattern was done via PrusaSlicer. In order to print this case with the hex pattern pre-done print the railcore_paneldue_7i_case.3mf file. Other slicers may work but I tested this design with PrusaSlicer.
https://github.com/mholiv/paneldue_7i_railcore_case
Because the hex pattern was done in slicer the original .scad file will not reflect these design elements. These are included in the bin/*.3mf files.
I printed mine out of cheap PLA at 0.2mm at a very high speed.