Thingiverse
Pan-Tilt for Fatshark camera 600TVL by Guenter
by Thingiverse
Last crawled date: 3 years ago
Pan-Tilt for Fatshark camera 600TVL
the solutions offered are original to me too expensive and the solutions presented here do not really to my liking. That's why I worked out my own solution I present here.
Requires additionally, 2x Servo HK 15178 from Hobby King and several small screws (1.5 - 2 mm)
The solution provides a central receptacle for the Pan servo, and builds on that.
In the recording of the Pan-Servos a directional pad is embedded, which is screwed to the servo. In the coverage of the Pan servos is a cable guide for the camera feed. This line is installed in the recess and serves as strain relief. These two parts are screwed together with small screws.
The camera is placed in the camera shooting and the tilt servo is fitted. The camera recording is then screwed with a corresponding washer on the servo. The opposite side, meaning the bottom of the servos is carefully drilled with an appropriate drill - not pierce, the servo could be damaged.
Through the opening of the camera receiving a grub screw is then screwed in, which serves as a counter bearing.
The tilt servo is now bolted to the servo support of the Pan-servos.
Note:
the camera mount not print vertically, the edges of the camera recording break from usual, they sin as not flexible.
Pan-Tilt für Fatshark Kamera 600TVL
die original angebotenen Lösungen sind mir zu kostspielig und die hier vorgestellten Lösungen haben mir nicht wirklich zugesagt. Deshalb habe ich mir eine eigene Lösung erarbeitet, die ich hier vorstelle.
Benötigt werden zusätzlich, 2x Servo HK 15178 von Hobbyking und diverse kleine Schrauben (1,5 - 2mm)
Die Lösung sieht eine zentrale Aufnahme für den Pan-servo vor und baut auf diesem auf.
In der Aufnahme des Pan-Servos ist ein Steuerkreuz eingelassen, das am Servo verschraubt wird. In der Abdeckung des Pan-Servos befindet sich eine Kabelführung für die Kamera-Zuleitung. Diese Leitung wird in die Aussparung verlegt und dient zusätzlich als Zugentlastung. Verschraubt werden diese beiden Teile mit kleinen Schrauben.
Die Kamera wird in der Kameraaufnahme platziert und der Tilt-Servo wird eingepasst. Die Kameraaufnahme wird dann mit einer entsprechenden Unterlegscheibe am Servo verschraubt. Die gegenüberliegende Seite, gemeint ist der Boden des Servos, wird vorsichtig mit einem entsprechendem Bohrer angebohrt, - nicht durchbohren, der Servo könnte beschädigt werden.
Durch die Öffnung der Kameraaufnahme wird dann eine Madenschraube eingeschraubt, die als Gegenlager dient.
Der Tilt-Servo wird nun am Servoträger des Pan-Servos verschraubt.
Anmerkung:
den Kameraträger nicht senkrecht drucken, die Flanken der Kameraaufnahme brechen sonst ab, sie sin so nicht flexibel.
(Übersetzung durch Google-translate)
the solutions offered are original to me too expensive and the solutions presented here do not really to my liking. That's why I worked out my own solution I present here.
Requires additionally, 2x Servo HK 15178 from Hobby King and several small screws (1.5 - 2 mm)
The solution provides a central receptacle for the Pan servo, and builds on that.
In the recording of the Pan-Servos a directional pad is embedded, which is screwed to the servo. In the coverage of the Pan servos is a cable guide for the camera feed. This line is installed in the recess and serves as strain relief. These two parts are screwed together with small screws.
The camera is placed in the camera shooting and the tilt servo is fitted. The camera recording is then screwed with a corresponding washer on the servo. The opposite side, meaning the bottom of the servos is carefully drilled with an appropriate drill - not pierce, the servo could be damaged.
Through the opening of the camera receiving a grub screw is then screwed in, which serves as a counter bearing.
The tilt servo is now bolted to the servo support of the Pan-servos.
Note:
the camera mount not print vertically, the edges of the camera recording break from usual, they sin as not flexible.
Pan-Tilt für Fatshark Kamera 600TVL
die original angebotenen Lösungen sind mir zu kostspielig und die hier vorgestellten Lösungen haben mir nicht wirklich zugesagt. Deshalb habe ich mir eine eigene Lösung erarbeitet, die ich hier vorstelle.
Benötigt werden zusätzlich, 2x Servo HK 15178 von Hobbyking und diverse kleine Schrauben (1,5 - 2mm)
Die Lösung sieht eine zentrale Aufnahme für den Pan-servo vor und baut auf diesem auf.
In der Aufnahme des Pan-Servos ist ein Steuerkreuz eingelassen, das am Servo verschraubt wird. In der Abdeckung des Pan-Servos befindet sich eine Kabelführung für die Kamera-Zuleitung. Diese Leitung wird in die Aussparung verlegt und dient zusätzlich als Zugentlastung. Verschraubt werden diese beiden Teile mit kleinen Schrauben.
Die Kamera wird in der Kameraaufnahme platziert und der Tilt-Servo wird eingepasst. Die Kameraaufnahme wird dann mit einer entsprechenden Unterlegscheibe am Servo verschraubt. Die gegenüberliegende Seite, gemeint ist der Boden des Servos, wird vorsichtig mit einem entsprechendem Bohrer angebohrt, - nicht durchbohren, der Servo könnte beschädigt werden.
Durch die Öffnung der Kameraaufnahme wird dann eine Madenschraube eingeschraubt, die als Gegenlager dient.
Der Tilt-Servo wird nun am Servoträger des Pan-Servos verschraubt.
Anmerkung:
den Kameraträger nicht senkrecht drucken, die Flanken der Kameraaufnahme brechen sonst ab, sie sin so nicht flexibel.
(Übersetzung durch Google-translate)
Similar models
thingiverse
free
Sidewinder X1, Genius, Kamerahalterung (Camera holder) / Smartphone, X-Achse by Hans-G
...//www.amazon.de/gp/product/b07gknd19q/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=utf8&psc=1
material:
pla 02 oder petg
kein suport
thingiverse
free
Filament-Guide, Filamentführung Genius by Hans-G
...de 5 mm). finally, the old holder of the sensor is fixed as filament guide at the top of the holder with the corresponding screw.
thingiverse
free
Filament-Guide, Filamentführung Sidewinder X1 by Hans-G
...de 5 mm). finally, the old holder of the sensor is fixed as filament guide at the top of the holder with the corresponding screw.
thingiverse
free
Actioncam Holder for Bike by And3eas
...bber mat
3x m5 nut
2x m5x35mm screws
whether the camera is attached with the original screw or with an allen screw is your thing.
thingiverse
free
Gürtelclip für Sun Sniper / Kameragurt by SirThommes
... und mit einer schlaufe fixiert.
den gürtelclip einfach über den gürtel der hose schieben.
viel spass damit. ein danke wäre nett!
3dwarehouse
free
LOFT FRENCH 01 Loftmarkt.de
...aumteiler für ein großes wohnzimmer zum essbereich oder andere lösungen nach individuellen bedürfnissen eingeteilt werden können.
thingiverse
free
Oral B Handteil Doppelständer by klaus0815
...iegelschrank gestellt werden.
vielleicht klappt die ausrichtung vom stl irgendwann mal hier für thingiverse? bin zu bl.. dafür...
thingiverse
free
Blinker Dynamisch by Gsedv
...tinen.
wer jedoch eine fertige platine haben möchte ,kann mir gerne eine nachricht schreiben.
und nun viel spass beim nachbauen!!
thingiverse
free
Spectrum DX-9 FPV Monitor holder for Boscam RX-LCD5802 Diversity Monitor by Guenter
...er vorsichtig festgeschraubt. damit werden die senkkopfschrauben fixiert und drehen sich beim anschrauben des monitors nicht mit.
3dwarehouse
free
Holz-Terrasse planen
...ponenteneigenschaften ändern. zusätzlich wird die fläche mit fugen und ohne berechnet #bangkirai #holzterrasse #planung #terrasse
Guenter
thingiverse
free
Ossum_Jeep_Cockpit_Instruments by Guenter
...rument panel. maybe a led as background lighting and already looks more realistic.
maybe you like that.
opfer.stl has no function
thingiverse
free
between ground for openrc Quad by Guenter
...793425), i create a piece that is 13mm high, so i have place for the elektronic.
you can change i with designspark mechanical 1.0
thingiverse
free
Ossum_Jeep_Instruments_backlight by Guenter
...using fits also, i have the corresponding stl files combined with simplify3d. after that there should be no problems in assembly.
thingiverse
free
FPV Transmitter retract-system by Guenter
...nder-antennen retract-system aufgebaut. benötigt wird neben einem 9g-servo ein freier schaltkanal.
https://youtu.be/vboa5kvfhiu
thingiverse
free
Ossum Jeep leaf springs and the axle holders by Guenter
...ed as a part. the brace i put on the width of the leaf spring, in order to increase the stability. i hope you can use it as well.
thingiverse
free
Frame_Mod for Ultra_Realistic_Ossum_Jeep by Guenter
...n. der ausdruck muss mit unterstützung ausgeführt werden, weil die höhen unterschiedlich sind, die füllrate sollte 100% betragen.
thingiverse
free
K8200 gooseneck LED light holder by Guenter
... from reichelt.de with socket. the original led from the usb-light has been removed, so i need a adapter to socket the led light.
thingiverse
free
SKY Q HDD_Bracket by Guenter
...zurück halten, das dieses tauschen der festplatte nicht funktioniert hat, sie wird leider nicht erkannt.
aber versuch macht klug.
thingiverse
free
Ossum_Jeep Driver by Guenter
...rden, ich habe dazu ein stück 3mm filament genommen, weil sich das dann verformen läßt und die montage nach dem sitz möglich ist.
thingiverse
free
EUFY Robovac 30 broom gear by Guenter
...ungen zur aufnahme der klemmfeder.
alles in allem funktioniert diese kombination und ist zudem noch laufruhiger.
stand 23-08-2020
600Tvl
thingiverse
free
Fatshark 600TVL Support by YvannB
...fatshark 600tvl support by yvannb
thingiverse
support for fatshark 600tvl camera. mount on a walkera runner 250.
thingiverse
free
ZMR250 Fatshark 600TVL Schwenkfront by sitoca
...zmr250 fatshark 600tvl schwenkfront by sitoca
thingiverse
zmr250 fatshark 600tvl schwenkfront
thingiverse
free
600TVL Lens Cover by rieders
...f450
http://www.banggood.com/600tvl-8_0mp-14-2_8mm-cmos-fpv-170-degree-wide-anlge-lens-camera-palntsc-p-984345.html?rmmds=myorder
thingiverse
free
600tvl Ball by Lowfiero
...tra 600tvl.
this is what i have so far the camera fits good and keeps both halves together.
next to work on a mount and movement.
thingiverse
free
Fatshark 600TVL Camera Mount by ZSAviation
...fatshark 600tvl camera mount by zsaviation
thingiverse
use a zip tie (2.5x100mm) to mount the 600tvl cam.
thingiverse
free
Fatshark 600TVL lens cap by boli
...fatshark 600tvl lens cap by boli
thingiverse
a simple lens cap for the fatshark 600tvl fpv camera.
thingiverse
free
600TVL 170 1200TVL 150 mount by Bortsov
...600tvl 170 1200tvl 150 mount by bortsov
thingiverse
600tvl 170 camera mount
thingiverse
free
Trifecta FatShark 600TVL Mount by dafes
...unt for quanum trifecta.http://www.hobbyking.com/hobbyking/store/__68596__quanum_trifecta_mini_foldable_tricopter_frame_kit_.html
thingiverse
free
runcam 600tvl 20° holder for QAV210 by goldendark
...runcam 600tvl 20° holder for qav210 by goldendark
thingiverse
runcam 600tvl 20° holder for qav210
thingiverse
free
Fatshark 600tvl to 32mm camera adapter by noishi
...shark 600tvl to 32mm camera adapter by noishi
thingiverse
adapter for mounting a fatshark 600tvl camera onto a 32mm camera mount
Fatshark
thingiverse
free
Fatshark Diopter Case
...hingiverse
i bought custom diopters for my fatsharks and no longer need the fatshark diopters. this is a case just to hold them.
thingiverse
free
Fatshark 922 by gumush
...fatshark 922 by gumush
thingiverse
fatshark 922 new shell project
thingiverse
free
Fatshark Joystick cap
...fatshark joystick cap
thingiverse
fatshark button cap to prevent accidental pushed on the left joystick.
thingiverse
free
fan block Fatshark by DarylBike
...fan block fatshark by darylbike
thingiverse
fan block fatshark
thingiverse
free
Fatshark camera mount by Brick85
...fatshark camera mount by brick85
thingiverse
mount for fatshark 700tvl with dampers.
thingiverse
free
Battery Holder for Fatshark
...ingiverse
this is a part that can be put around a battery in the fatshark strap so that the battery will not slip out that easy.
thingiverse
free
Box battery Fatshark by DarylBike
...box battery fatshark by darylbike
thingiverse
support batterie pour lunette fatshark
thingiverse
free
Fatshark 18650 Case by Drifter_uk
...fatshark 18650 case by drifter_uk
thingiverse
18650 battery case to fit fatshark goggles
thingiverse
free
Pilot HD fatshark by rcoxey
...pilot hd fatshark by rcoxey
thingiverse
scann of pilot hdf camera from fatshark
thingiverse
free
Camera housing fatshark by nimic
...camera housing fatshark by nimic
thingiverse
a camera housing for fpv camera from fatshark
Pan
design_connected
$16
Pan Pan
...pan pan
designconnected
ligne roset pan pan computer generated 3d model. designed by kuehne-thompson, barbara.
archibase_planet
free
Pan
...pan
archibase planet
lavatory pan w.c. pan sanitary ware
lavatory pan - 3d model for interior 3d visualization.
archibase_planet
free
Pan
...pan
archibase planet
lavatory pan w.c. pan sanitary ware
lavatory pan - 3d model for interior 3d visualization.
archibase_planet
free
Pan
...pan
archibase planet
lavatory pan pan sanitary ware
lavatory pan 666310_9926k1 - 3d model for interior 3d visualization.
archibase_planet
free
Pan
...pan
archibase planet
lavatory pan pan sanitary ware
lavatory pan 666110 - 3d model for interior 3d visualization.
archibase_planet
free
Pan
...pan
archibase planet
frying pan; pan kitchen ware
pan - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Pan
...pan
archibase planet
lavatory pan w.c. pan sanitary ware
lavatory pan k5018 - 3d model for interior 3d visualization.
archibase_planet
free
Pan
...pan
archibase planet
lavatory pan w.c. pan sanitary ware
lavatory pan r3701 - 3d model for interior 3d visualization.
archibase_planet
free
Pan
...pan
archibase planet
lavatory pan w.c. pan sanitary ware
lavatory pan v3122 - 3d model for interior 3d visualization.
archibase_planet
free
Pan
...pan
archibase planet
lavatory pan w.c. pan sanitary engineering
pan - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Tilt
3ddd
free
TILT
...tilt
3ddd
tilt
http://www.graypants.com
tilt
gp-133 -size: o: 46cm | h: 35cm.
3ddd
$1
TILT
...tilt
3ddd
kenneth cobonpue
http://www.kennethcobonpue.com/collection/view/44/tilt
design_connected
$9
Tilt
...signconnected
photo-realistic 3d models of the tilt shelves from bonaldo for 3d architectural and interior design presentations.
turbosquid
$7
Tilt
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Urban electric Tilt
...urban electric tilt
3ddd
urban electric , tilt
urban electric tilt
design_connected
free
Tilt 70
...tilt 70
designconnected
free 3d model of tilt 70 by nc möbler designed by andersson, peter.
3d_export
$5
tilt door knob
...tilt door knob
3dexport
tilt door knob
turbosquid
$65
Tilt scale
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Tilted Cross
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
tilt shape door knob
...tilt shape door knob
3dexport
tilt shape door knob
Camera
archibase_planet
free
Camera
...base planet
camera surveillance camera video camera
camera surveillance n090211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...hibase planet
camera security camera video camera
camera security n210515 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Camera
...se planet
camera web camera webcam
camera butterfly usb pc camera n090713 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...mera
archibase planet
surveillance camera video camera camcorder
camera n011211 - 3d model (*.3ds) for exterior 3d visualization.
archibase_planet
free
Camera
...camera
archibase planet
camera digital camera
camera canon digital n041211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...camera
archibase planet
camera film camera phototechnique
camera n100214 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...amera
archibase planet
camera video camera camcorder
camera video n070315 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...rchibase planet
camera video camera camcorder
camera studio n101213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Camera
...ibase planet
digital camera camera phototechnique
camera canon ixus 400 n310311 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...ase planet
photocamera video camera camera
camera sony t300 black n291010 - 3d model (*.gsm+*.3ds) for interior 3d visualization.