Pan, tilt and roll camera pod for FPV. by tahustvedt 3d model
3dmdb logo
Thingiverse
Pan, tilt and roll camera pod for FPV. by tahustvedt

Pan, tilt and roll camera pod for FPV. by tahustvedt

by Thingiverse
Last crawled date: 3 years, 1 month ago
EDIT - 27.01.2016
Added a plate for single cam with a platform for mounting a Mobius action cam on top.
EDIT - 06.01.2016
I added a plate for a single cam. Roll03.stl.
My take on a pan/tilt/roll camera mount for two 1/3" Sony CCD cams. The camera plate will probably need to be adapted to your camera(s), or use rollblank.stl as a start to make your own plate. Just load the STL into your CAD software or make a new plate from scratch. It is designed to hold two cameras rotated 90° for my DIY goggles. My cameras will mount with double sided tape.
Designed around two Hitec HS-225MG/BB and one HS-65HB servo. The flanges fit these servos directly.
Requires one 3x10x4 mm ball bearing and one M3x12 screw in addition to self tapping screws for the servos (without grommets).

Tags